oil type DODGE DURANGO 1999 1.G Workshop Manual

DODGE DURANGO 1999 1.G Workshop Manual DURANGO 1999 1.G DODGE DODGE https://www.carmanualsonline.info/img/12/5703/w960_5703-0.png DODGE DURANGO 1999 1.G Workshop Manual

Page 3 of 193

DODGE DURANGO 1999 1.G Workshop Manual Downloaded from www.Manualslib.com manuals search engine firing order is 1±8±4±3±6±5±7±2. The engine serial
number is located at the right front side of the
engine block (Fig. 1)
ENGINE LUBRICA

Page 6 of 193

DODGE DURANGO 1999 1.G Workshop Manual Downloaded from www.Manualslib.com manuals search engine VALVE SPRING
DESCRIPTION
The valve springs are made from high strength
chrome silicon steel. The springs are common for
intake and exhaust appl

Page 15 of 193

DODGE DURANGO 1999 1.G Workshop Manual Downloaded from www.Manualslib.com manuals search engine CHECKING ENGINE OIL PRESSURE
(1) Remove oil pressure sending unit (Fig. 3) and
install gauge assembly C-3292.
(2) Run engine until thermostat o

Page 16 of 193

DODGE DURANGO 1999 1.G Workshop Manual Downloaded from www.Manualslib.com manuals search engine locating dowel is recommended during assembly to
prevent smearing the material off location.
ENGINE OIL
WARNING: NEW OR USED ENGINE OIL CAN BE

Page 17 of 193

DODGE DURANGO 1999 1.G Workshop Manual Downloaded from www.Manualslib.com manuals search engine CRANKCASE OIL LEVEL INSPECTION
CAUTION: Do not overfill crankcase with engine oil,
pressure loss or oil foaming can result.
Inspect engine oil

Page 18 of 193

DODGE DURANGO 1999 1.G Workshop Manual Downloaded from www.Manualslib.com manuals search engine Damaged or worn threads can be repaired. Essen-
tially, this repair consists of:
²Drilling out worn or damaged threads.
²Tapping the hole wit

Page 79 of 193

DODGE DURANGO 1999 1.G Workshop Manual Downloaded from www.Manualslib.com manuals search engine DESCRIPTION SPECIFICATION
No. 3 83.88 - 84.08 mm
(3.302 - 3.310 in.)
PISTON PINS
Type Pressed Fit
Clearance In Piston 0.010 - 0.019 mm
(0.0004

Page 86 of 193

DODGE DURANGO 1999 1.G Workshop Manual Downloaded from www.Manualslib.com manuals search engine 5.2L ENGINE
TABLE OF CONTENTS
page page
DESCRIPTION AND OPERATION
ENGINE................................86
ENGINE LUBRICATION SYSTEM...........

Page 87 of 193

DODGE DURANGO 1999 1.G Workshop Manual Downloaded from www.Manualslib.com manuals search engine ENGINE LUBRICATION SYSTEM
DESCRIPTION
A gear-type positive displacement pump (Fig. 3) is
mounted at the underside of the rear main bearing
cap.

Page 89 of 193

DODGE DURANGO 1999 1.G Workshop Manual Downloaded from www.Manualslib.com manuals search engine EXHAUST MANIFOLD
DESCRIPTION
The exhaust manifolds are constructed of cast iron
and are LOG type with balanced flow (Fig. 5). One
exhaust manif
Page:   1-10 11-20 next >