air condition DODGE DURANGO 2022 Vehicle Warranty

BFGOODRICH® TIRES
33
It is impossible to predict when tires should be replaced based on their calendar age
alone. However the older a tire the greater the chance that it will need to be replaced due
to the service-related evolution or other conditions found upon inspection or detected
during use.
While most tires will need replacement before they achieve 10 years, it is recommended
t h

at any tires in service 10 years or more from the date of manufacture, including spare
tires, be replaced with new tires as a simple precaution even if such tires appear
serviceable and even if they have not reached the legal wear limit.
For tires that were on an original equipment vehicle i.e., acquired by the consumer on a
n e

w vehicle, follow the vehicle manufacturer’s tire replacement recommendations, when
specified (but not to exceed 10 years).
The date when a tire was manufactured is located on the sidewall of each tire.
C o

nsumers should locate the Department of Transportation (DOT) code on the tire which
begins with DOT and ends with the week and year of manufacture. For example, a DOT
code ending with "2204" indicates a tire made in the 22nd week (May) of 2004.
REMEMBER TO AVOID DAMAGE TO YOUR TIRES AND POSSIBLE ACCIDENT
• INSPECT TIRES AT LEAST MONTHLY, AND IMMEDIATELY AFTER STRIKING ANY ROAD HAZARD.
• C HECK TIRE PRESSURE AT LEAST ONCE EACH MONTH WHEN TIRES ARE COLD AND
B
EFORE EVERY LONG TRIP.
• N EVER UNDERINFLATE OR OVERINFLATE A TIRE.
•
NEVER OVERLOAD YOUR VEHICLE AND TIRES.
•
ALWAYS OBEY LEGAL SPEED LIMITS AND DRIVE AT A SPEED THAT IS REASONABLE
U
NDER THE ROAD AND WEATHER CONDITIONS.
• A VOID DRIVING OVER POTHOLES, OBSTACLES, CURBS OR EDGES OF PAVEMENT.
•
AVOID EXCESSIVE WHEEL SPINNING.
•
IF YOU SEE ANY DAMAGE TO A TIRE, REPLACE THE TIRE WITH A PROPERLY INFLATED
S
PARE AND VISIT A QUALIFIED TIRE PROFESSIONAL AT ONCE.
• K EEP TIRES AND WHEELS PROPERLY ALIGNED, BALANCED, AND ROTATED.
•
HAVE MOUNTING AND REPAIRS DONE BY A TIRE PROFESSIONAL.
•
IF YOU HAVE ANY QUESTIONS CONTACT YOUR BFGOODRICH® RETAILER.
F
AILURE TO FOLLOW ANY OF THE RECOMMENDED PRECAUTIONS CONTAINED IN THIS
O W

NER’S MANUAL CAN LEAD TO ERRATIC VEHICLE BEHAVIOR OR TIRE DAMAGE,
POSSIBLY RESULTING IN AN ACCIDENT.

BRIDGESTONE® - FIRESTONE®
42
Pressure Loss: Tires can lose 1 psi (7 kPa) per month under normal conditions and can
lose 1 psi (7 kPa) for every 10° F (5.6° C) temperature drop. A puncture, leaking valve,
or other damage could also cause inflation pressure loss. If a tire loses more than 2 psi
(14 kPa) per month, have it checked by a qualified tire service professional.
TIPS FOR SAFE TIRE INFLATION
• Check your tire pressures, including your spare tire, monthly and before long trips or carrying extra weight. Be sure to use an accurate pressure gauge.
• C heck inflation pressure when the tires are “cold.” Tires are considered “cold” when
t
he vehicle has been parked for three hours or more, or if the vehicle has been driven
less than a mile at moderate speed.
• N ever release pressure from a hot tire in order to reach the recommended cold tire
p
ressure. Normal driving causes tires to run hotter and inflation pressure to increase.
If you reduce inflation pressure when your tires are hot, you may dangerously under -
inflate your tires.
• I f it is necessary to adjust inflation pressure when your tires are “hot”, set their pres -
s
ure to 4 psi (28 kPa) above the recommended cold inflation pressure. Recheck the
i n

flation pressure when the tires are cold.
• I f your tires lose more than 2 psi (14 kPa) per month, the tire, the valve, or wheel may
b
e damaged. Consult a qualified tire service professional for an inspection.
• U se valve caps to keep the valves clear of debris and to help guard against inflation
p
ressure loss.
TIPS FOR SAFE LOADING
• Always keep the vehicle manufacturer’s recommended inflation pressure in all your tires, including the spare. Check their pressure monthly and before long trips or
carrying extra weight.
• N ever exceed the maximum load rating stamped on the sidewall of your tire.
WARNING!


Inflating an unsecured tire is dangerous. If it bursts, it could be hurled into the air with
explosive force resulting in serious personal injury or death. Never inflate a tire unless
it is secured to the vehicle or a tire mounting machine.
WARNING!


Driving your vehicle in an overloaded condition is dangerous. Overloading causes
excessive tire heat build-up and internal structural damage. This can cause a tire
failure, even at a later date, which could lead to serious personal injury or death.
Consult the vehicle tire information placard, certification label, and owner’s manual
for the recommended vehicle load limits and loading recommendations.

BRIDGESTONE® - FIRESTONE®
44
The 10 year period after the date of production is not an indicator of actual service life
for any individual tire. Some tires will need to be replaced before 10 years due to
conditions such as punctures, impact damage, improper inflation, overloading, tread
wear or other conditions involving use or misuse of the tire. If a tire is worn out or
otherwise unserviceable from damage or conditions of use, it should be replaced
regardless of when it was produced or placed in service.
The vehicle manufacturer may consider vehicle performance characteristics when
ma

king tire replacement recommendations. Consult your vehicle Owner’s Manual for any
information regarding tire service life and replacement and follow the recommendations
applicable to your vehicle.
TIRE MANUFACTURE DATE
The tire manufacture date is determined by examining the DOT tire identification
number, also known as the DOT serial number or code, which can be found on at least
one sidewall near the wheel. It may be necessary to look on both sides of the tire to find
the entire serial code. For more information on DOT serial codes, see “Tire Sidewall
Labeling” in this manual.
Tires Produced Since 2000: T
he last four (4) digits of the serial code identify the week
and year of production. In the example below, the tire was produced in the 18th week of
2000. Another example, a tire with a serial code ending in “2406” would have been
produced in the 24th week of 2006.
Tires Produced Prior to 2000: T
he last three (3) digits of the serial code identify the week
and year of production. For example, a tire with a code ending in “329” would likely have
been produced in the 32nd week of 1999, but possibly produced in 1989. If in doubt,
consult a qualified tire service professional.
TIRE REPAIRS
WARNING!


Driving on an improperly repaired tire is dangerous. An improper repair can be
unreliable or permit further damage to the tire. The tire may suddenly fail, causing
serious personal injury or death.

BRIDGESTONE® - FIRESTONE®
45
A complete inspection and repair of your tire in accordance with US Tire Manufacturers
Association (USTMA) procedures should be conducted by a qualified tire service
professional. While the comprehensive procedures and recommendations for tire repair
are beyond the scope of this manual, a proper tire repair includes the following:
• The tire is demounted from the wheel for a complete inspection, inside and out.
Some
damage to the tire may only be evident on the interior of the tire.
• The puncture injury is 1/4 of an inch (6 m
m) or less and must be within the tread area
as
shown in the graphic. This helps ensure long-term tire and repair durability.
• A patch is applied to the interior of the tire and the puncture hole is filled with a suit -
a
ble plug/stem filler. T
his helps ensure that the interior of the tire is adequately sealed
to prevent inflation pressure loss and prevents contamination of the steel belts and
other plies from the elements (such as water) in the outside world.
Additional notes about tire repairs:
• N ot all punctured or damaged tires can be properly repaired; consequently, they must
b
e replaced. NEVER repair a tire with any of the following conditions:
• W ear to the tire’s built-in tread wear indicators or to 2/32 of an inch (1.6
mm)
re
maining tread depth in any area of the tread.
• W ith a puncture larger than 1/4 of an inch (6
mm).
• W ith a puncture or other damage outside the repairable tread area (as shown in
t
he graphic).
• W ith a pre-existing, improper repair.
•

A ny tire repair done without removing the tire from the wheel is improper. The tire must
b
e demounted from the wheel and the interior inspected for damage that may not be
evident on the exterior of the tire.

BRIDGESTONE® - FIRESTONE®
46
• Using only a plug/stem, or using only a patch, is not a safe or proper repair. A patch must be applied to the interior of the tire and the puncture hole must be filled with a
suitable plug/stem filler to prevent inflation pressure loss and contamination of the
steel belts and other plies.
• N EVER substitute a tube for a proper repair or to remedy an improper repair.
•
Tubes, like tires, should only be repaired by a qualified tire service professional.
•
Some vehicle manufacturers do not recommend using repaired tires. Consult your
v
ehicle Owner’s Manual or contact the vehicle manufacturer before operating a
repaired tire on your vehicle.
ASK how your tire will be repaired. ALWAYS insist on a proper tire repair.
Emergency/Temporary Sealant or Filler Repairs: A
n emergency/temporary sealant or
filler injected into the tire, such as by aerosol can or injection/squeeze-tube, is not a
proper repair and voids the tire Limited Warranty. A tire injected with such sealant/filler
must be replaced by a qualified tire service professional as soon as possible.
Speed Rating: T
he tire’s speed rating is void if the tire is repaired, retreaded, damaged,
abused, or otherwise altered from its original condition. Thereafter, it should be treated
as a non-speed rated tire. See “Tire Speed Ratings” in this manual.
Improper repair voids the tire Limited Warranty. S
ee “Limited Warranty” in this manual.
RFT (Run-Flat Technology) Tires: I
n addition to the above, there are recommendations
specific to the repair of RFT tires; see “RFT Tires with Run-Flat Technology” in this
manual.
TIRE MOUNTING AND OTHER SERVICING
WARNING!


Tell the tire service professional if you have used an aerosol fixer to inflate/seal the
tire. Aerosol fixers could contain a highly volatile gas. Always remove the valve core
outdoors, away from sources of excessive heat, flame, or sparks and completely
deflate the tire before removing it from the wheel.
WARNING!


Removing and replacing tires on wheels can be dangerous. Attempting to mount tires
with improper tools or procedures may result in a tire explosion causing serious
personal injury or death. This is only a job for a qualified tire service professional.
Never perform tire service procedures without proper training, tools, and equipment.

BRIDGESTONE® - FIRESTONE®
47
This manual is not intended to provide proper training or service procedures for tire
mounting, demounting, balancing, rotation, or repair. Please leave these tasks to
qualified tire service professionals. For your safety and that of others:
• A lways stand well clear of any tire mounting operation. This is especially important
w
hen the service operator inflates the tire. If the tire has been improperly mounted, it
may burst with explosive force causing serious personal injury or death.
• T ires must match the width and diameter requirements of the wheels. For example,
1
6 inch diameter tires must only be mounted to 16 inch diameter wheels. Radial tires
m u

st only be mounted to wheels approved for radial tires.
• W heels must be free of cracks, dents, chips, and rust. Tires must be free of bead
d
amage, cuts, and punctures.
• N ever inflate a tire beyond 40 psi (275 kPa) to seat the beads. Be absolutely certain
b
eads are fully seated before adjusting inflation pressure to the level recommended
for vehicle operation.
• N ever put flammable substances in tire/wheel assemblies at any time. Never put any
f
lammable substance into a tire/wheel assembly and attempt to ignite to seat the
beads.
• A lways stand well away from the work area when tires are being spin balanced either
o
n or off the vehicle.
HIGH PERFORMANCE, LOW ASPECT RATIO TIRES
Many new vehicles come equipped from the factory with high performance and/or low
aspect ratio tires. Generally, these tires provide increased vehicle handling capability,
but may also have numerous engineering performance trade-offs associated with their
designs.
• Lo w aspect ratio tires, with reduced sidewall height, may be more susceptible to
d
amage from potholes, road hazards, and other objects such as curbs. This is true for
the wheels as well. Therefore, as with all other tires, it is important to drive with care
and maintain proper inflation pressure and load conditions. See “Tire Inflation Pres -
sure” and “Tire Damage, Inspection and Service Life” in this manual.
• Some sports cars and other handling performance enhanced vehicles, including s
edans and light trucks/SUVs, may be originally equipped with high performance tires
that are more optimized for warmer weather use. Colder, winter weather traction may
be reduced for these types of tires. Winter tires may be recommended by the vehicle
manufacturer for colder weather application. See “Winter Tires,” the next section in
this manual.
• H igh performance tires may also wear more quickly, ride more firmly, and produce
m
ore noise during operation.
Consult your vehicle Owner’s Manual and tire information placard, or a qualified tire
s e

rvice professional, for more information and specifics regarding these types of tires.

BRIDGESTONE® - FIRESTONE®
49
HIGH SPEED DRIVING
• Regardless of the speed and handling capabilities of your car and its tires, a loss of vehicle control can result from exceeding the maximum speed allowed by law or
warranted by traffic, weather, vehicle, or road conditions.
• H igh-speed driving should be left to trained professionals operating under controlled
c
onditions.
• N o tire, regardless of its design or speed rating, has unlimited capacity for speed, and
a
sudden tire failure can occur if its limits are exceeded. See “Tire Speed Ratings,” the
next section in this manual.
Refer to your vehicle Owner’s Manual for any tire pressure recommendations for high
s p

eed driving.
TIRE SPEED RATINGS
A tire bearing a letter “speed rating” designation indicates the tire’s speed capability
according to standardized laboratory tests. This speed rating system is intended to
permit comparison of the speed capabilities of different tires. When replacing your tires,
consult your vehicle Owner’s Manual and tire information placard for recommendations,
if any, concerning the use of speed rated tires.
• To avoid reducing the speed capability of the vehicle, replace a speed rated tire only w
ith another tire having at least the same speed rating. It is the “top speed” of the
“slowest” tire on the vehicle which limits the vehicle’s top speed without tire failure.
• T he tire’s speed rating is void if the tire is repaired, retreaded, damaged, abused, or
o
therwise altered from its original condition. Thereafter, it should be treated as a
non-speed rated tire.
• N on-speed rated tires are usually for ordinary passenger car or light truck service and
n
ot for high speed driving.
• F or winter tires used in cold weather conditions, it is generally acceptable to apply a
t
ire with a lower speed rating than your original tires; however, speed should be
reduced accordingly. All winter tires should be the same speed rating. Some vehicles
have specific recommendations regarding winter tire use; consult your vehicle
Owner’s Manual and tire information placard. See “Winter Tires” in this manual.
These speed ratings are based on standardized laboratory tests under specific,
co
ntrolled conditions. While these tests may relate to performance on the road,
real-world driving is rarely identical to any test conditions. Your tire’s actual speed
capability may be less than its rated speed since it is affected by factors such as inflation
WARNING!


Driving at high speed is dangerous and can cause a vehicle accident, including
serious personal injury or death.

BRIDGESTONE® - FIRESTONE®
54
TIRE REGISTRATION
Registration of your tires is an important safety precaution since it enables the
manufacturer to notify you in the event of a recall. When you purchase replacement tires,
the retailer will provide a registration card on which the tire identification numbers have
been recorded; fill in your name and address on the card and mail it promptly. Some
retailers may submit the registration for you. You do not need to register tires which come
as original equipment on new vehicles—the vehicle and tire manufacturers handle that
for you.
RFT TIRES WITH RUN-FLAT TECHNOLOGY
If your vehicle is equipped with Bridgestone® or Firestone® brand RFT
tires, this chapter presents specific maintenance and safety issues
a s

sociated with these tires that are in addition to those covered elsewhere in this
manual.
What is RFT? Run-Flat Technology tires are extraordinary tires that utilize specially
d e

signed components to temporarily support your vehicle in the event of inflation
pressure loss, such as from a puncture. This gives you the ability to drive to a convenient
and safe location to change your tire (if equipped with a spare) or have it inspected for
possible repair or replacement.
Naturally, certain run-flat and low pressure operating limitations apply, which varies
ac
cording to the specific self-supporting tire design. Like all tires, during normal
operation, they must be properly inflated and maintained. Regardless of the design or
quality, no tire is indestructible.
RFT — How to Identify: B
ridgestone® and Firestone® brand tires are marked on the
sidewalls, near the wheel, with the RFT logo (shown above).
RFT INFLATION PRESSURE
Like other tires, RFT tires need proper inflation pressure maintenance for safe operation
an
d to achieve the maximum tire life and performance. Check inflation pressures
monthly and before long trips or carrying extra weight. Use an accurate tire gauge and
check pressures when the tires are cold. Follow the vehicle manufacturer’s
recommendation for inflation pressure settings as indicated on the vehicle tire
information placard and/or in the vehicle Owner’s Manual. Do not forget the spare, if
applicable. See “Tire Inflation Pressure” in this manual.
TIRE PRESSURE MONITORING SYSTEM (TPMS)
A functioning Tire Pressure Monitoring System (TPMS) must be used with your Run Flat
tires. These tires ride so well even without inflation pressure, the TPMS may be necessary
to alert you of an inflation pressure loss condition. When alerted, follow the instructions
in your vehicle Owner’s Manual and see “Run-Flat or Low Tire Pressure Operation,” the
following section in this manual.

BRIDGESTONE® - FIRESTONE®
56
DISTANCE—HOW FAR YOU CAN DRIVE
Factors affecting run-flat or low tire pressure operating distance include vehicle speed,
load, and maneuvering; the amount of inflation pressure loss; the extent of any tire
damage; and ambient temperature.
The tire may be marked on the sidewall with run-flat or low tire pressure operating speed
an

d/or distance limitations, which vary by tire design and vehicle application (consult
your vehicle owner’s manual). By international standard, RFT tires have a baseline
limitation in run-flat mode of the following:
NOTE:
• M aximum distance values are determined under controlled conditions, which may
v
ary in actual use.
• Y our mileage capability may be less, or more, depending on your specific operating
c
onditions.
• I f in doubt, do not exceed the 50
mile (80 km) limitation.
• S eek tire service as soon as possible to minimize tire damage.
SPECIAL SERVICE AND REPAIR ISSUES
Run-Flat Certified Retailers
Because of the advanced technology and design of Run-Flat tires and the required Tire
Pr

essure Monitoring Systems (TPMS), Bridgestone® Firestone® Run-Flat Certified
Retailers are specially trained to sell and service RFT tires.
Run-Flat Certified Retailers have the necessary equipment and are specially trained to
p r

operly mount and demount RFT tires and to handle TPMS devices. Conventional
mounting equipment may irreparably damage RFT tires and an improper repair is unsafe
and will void the Limited Warranty. Accordingly, it is important to go to a Bridgestone®
Firestone® Run-Flat Certified Retailer for tire maintenance and replacement.
Call toll-free 1-877-BFS-4RFT or, 87
7-237-4738 or visit www.bridgestonetire.com to
locate the nearest Bridgestone® Firestone® Run-Flat Certified Retailer.
Inspection after Run-Flat or Low Pressure Operation
Following run-flat or low tire pressure operation, or in the event of any other tire damage
or
unusual condition, it is very important to obtain a proper and complete tire evaluation
as soon as possible.
Rotation
Follow the vehicle manufacturer’s recommendations, or rotate every 5,000 miles per the
r e

commendations in this manual (see “Radial Tire Rotation”). In some cases, TPMS
devices require reprogramming with each tire rotation. Maximum Speed:
50 mph (80 km/h)
Maximum Distance: 50 miles (80 km)

BRIDGESTONE® - FIRESTONE®
57
RFT Tire Replacement
Do not replace or mix RFT tires with conventional tires, unless on an emergency/
t e

mporary basis. Conventional tires do not have run-flat capability and the handling
characteristics of the vehicle with these tires may be different. If a conventional tire is
used on an emergency/temporary basis, verify that its size, load capacity, inflation
pressure, and speed rating specifications meet the requirements of the vehicle. Replace
any conventional tire with the proper RFT tire as soon as possible.
RFT Tire Damage and Repair
No tire, regardless of its design or quality is indestructible. RFT tires can be ultimately
r e

ndered unusable due to a puncture or other road hazard as well as from improper
run-flat or low tire pressure operation. Some punctures may be repaired under certain
restrictions and prescribed procedures.
When driven flat or with low pressure, factors affecting reparability include vehicle speed,
l o

ad, and maneuvering; the amount of inflation pressure loss; and ambient temperature.
In any situation, the extent and location of direct damage from a puncturing object or
other road hazard are also critical factors.
RFT tires are not repairable in any of the following situations:
• I f the tire was operated with inflation pressure less than 15 psi (100 kPa).
•
Abrasion or other damage is present on the exterior tread, sidewall or bead areas.
•
Abrasion, wrinkling, or separation is present on the tire interior.
•
Any condition or damage is present that disqualifies repair of a conventional tire.
R
un-Flat Certified Retailers will fully inspect your tire, inside and out, to determine if the
t i

re can be repaired. Tire damage is not always visible from the outside and the tire must
be removed from the wheel for a complete inspection. For more information, see the
section “Tire Repairs” in this manual.
NOTE:
Some vehicle manufacturers do not recommend using repaired tires. Consult your
v e

hicle Owner’s Manual or contact the vehicle manufacturer before operating a repaired
tire on your vehicle.