Instrument cluster DODGE NEON 1997 1.G Wiring Diagrams Owner's Guide

Downloaded from www.Manualslib.com manuals search engine 8W-43 AIRBAG SYSTEM
INDEX
page
SCHEMATICS AND DIAGRAMS........................................................... 1
DESCRIPTION AND OPERATION.......................................................... 5
Component Page
Airbag Control Module............8W-43-2, 3, 4
Airbag Warning Lamp.................8W-43-3
Data Link Connector..................8W-43-2
Driver Side Airbag...................8W-43-4
Fuse 12 (FB)........................8W-43-2
Fuse Block.........................8W-43-2Component Page
G202..............................8W-43-2
Instrument Cluster...................8W-43-3
Left Airbag Impact Sensor.............8W-43-3
Passenger Side Airbag.................8W-43-4
Right Airbag Impact Sensor............8W-43-3
8W - 43 - 2 8W - 43 AIRBAG SYSTEMPL

Downloaded from www.Manualslib.com manuals search engine C19
CLUSTER INSTRUMENT
1FRONT
RIGHT
IMPACT
SENSOR SENSORIMPACTRIGHT FRONT
2
SENSOR IMPACT
AIRBAG
RIGHT LEFT
AIRBAG
IMPACT
SENSOR
2LEFT
RIGHT
IMPACT
SENSOR SENSORIMPACTRIGHTLEFT
1
3
LINE 1
LEFT
IMPACT
SENSORAIRBAG
WARNING
LAMP
DRIVER LINE 2
48
LINE 2
SENSORIMPACTRIGHTLINE 1
79
AIRBAG
CONTROL
MODULE
R47
18
DB/LB
R47
18
DB/LB
151678C101
R49
18
LB
R49
18
LB
R46
18
BR/LB
R46
18
BR/LB
R48
18
TN
R48
18
TNR41
18
BK/TN
SENSORIMPACTLEFT RIGHT
IMPACT
SENSOR
AIRBAG
WARNING
LAMP(8W-40-5)
(8W-40-5)
PL-RHD8W-43 AIRBAG SYSTEM 8W - 43 - 3
PLR04302978W-1

Downloaded from www.Manualslib.com manuals search engine 8W-50 FRONT LIGHTING
INDEX
page
SCHEMATICS AND DIAGRAMS........................................................... 1
DESCRIPTION AND OPERATION.......................................................... 7
Component Page
A/C Heater Control Switch.............8W-50-2
Fog Lamp Relay...................8W-50-3, 6
Front Fog Lamp Switch.............8W-50-5, 6
Fuse 2 (FB).......................8W-50-2, 5
Fuse 3 (PDC)........................8W-50-2
Fuse 9 (FB).......................8W-50-2, 4
Fuse 16 (PDC).......................8W-50-6
Fuse 17 (FB)......................8W-50-3, 4
Fuse 18 (FB)........................8W-50-3
Fuse Block.........................8W-50-2
Fuse Block.........................8W-50-3
Fuse Block.........................8W-50-4
Fuse Block.........................8W-50-5
G101..........................8W-50-3, 4, 6
G103..........................8W-50-3, 4, 6
G204............................8W-50-4, 6
Headlamp Dimmer And Optical
Horn Switch..................8W-50-2, 3, 4
Headlamp Leveling Switch...........8W-50-2, 4
Headlamp Switch..............8W-50-2, 4, 5, 6
Instrument Cluster...................8W-50-3
Left Fog Lamp......................8W-50-6
Left Headlamp..................8W-50-3, 4, 6
Left Headlamp Leveling Motor..........8W-50-4
Left License Lamp...................8W-50-5
Left Park/Turn Signal Lamp............8W-50-5
Power Distribution Center...........8W-50-2, 6Component Page
Radio..............................8W-50-5
Rear Fog Lamp Switch..............8W-50-2, 6
Right Fog Lamp.....................8W-50-6
Right Headlamp.....................8W-50-3
Right Headlamp Leveling Motor.........8W-50-4
Right Park/Turn Signal Lamp.........8W-50-3, 5
Right Repeater Lamp.................8W-50-3
S107............................8W-50-3, 6
S108..............................8W-50-4
S113 ..............................8W-50-5
S114 ..............................8W-50-3
S115 ..............................8W-50-6
S116 ..............................8W-50-3
S117 ..........................8W-50-3, 4, 6
S127..............................8W-50-3
S133............................8W-50-3, 4
S201..............................8W-50-6
S202..............................8W-50-4
S207..............................8W-50-3
S209..............................8W-50-3
S210............................8W-50-2, 4
S213..............................8W-50-2
S221..............................8W-50-2
S306..............................8W-50-5
Turn Signal/Hazard Switch.............8W-50-3
8W - 50 - 2 8W - 50 FRONT LIGHTINGPL

Downloaded from www.Manualslib.com manuals search engine C10316
2
L44
18
VT/BK
HEADLAMP RIGHT
FEED BEAMLOW
HEADLAMP
DIMMER
AND
OPTICAL
HORN
SWITCH
1
L4
14
VT/WT
RD/OR14L3 3
HIGH
BEAM
FEED
FUSE
BLOCK
38
18FUSE10A
17
10A
FUSE
17
37
L3
14
RD/ORL3
16
RD/OR
CLUSTER INSTRUMENT S209
2C114C101
L3
16
RD/OR
VT/RD20 L44
RD/OR16L3
1
BK18Z1
BK18Z1
S107
G101
3
G103S117
Z1
18
BK
31
SWITCH HAZARD
SIGNAL/
TURN
3C1
TN22 L60 L60
22
TN
S207
L60
22
TN
16C103
TN22 L60
S116
L60
18
TNL60
18
TN
11
2LAMP REPEATER
RIGHT3LAMP
SIGNAL
TURN
PARK/
RIGHT
BK18Z1 Z1
18
BK
S127
Z1
18
BK
LEFT
HEADLAMP
46
(IN PDC) RELAY
LAMP
FOG
Z1
18
BK
1
L3
16
RD/OR
S114
L43 20VT
2
16C103
L43
20
VT
L43
18
VT
S133
(8W-50-2)
(8W-11-2)
(8W-11-12) (8W-11-12)
(8W-40-2)
(8W-40-4)
(8W-15-2)
(8W-15-2)
(8W-15-4)(8W-15-4) (8W-52-3)
(8W-52-3)
(8W-50-6)(8W-11-2)
PL-RHD8W-50 FRONT LIGHTING 8W - 50 - 3
PLR05002978W-1

Downloaded from www.Manualslib.com manuals search engine 8W-50 FRONT LIGHTING
INDEX
page page
GENERAL INFORMATION
INTRODUCTION......................... 7
DESCRIPTION AND OPERATION
FOG LAMPS (FRONT).................... 8HEADLAMP LEVELING MOTORS............ 8
HEADLAMPS........................... 7
PARKING LAMPS........................ 7
GENERAL INFORMATION
INTRODUCTION
The headlamp switch has 3 positions, ON, PARK
(parking lights) and OFF. Two circuits, L2 and L20
connect the headlamp switch to the headlamp dim-
mer/optical horn switch located in the multi-function
switch. The multi-function switch feeds the low and
high beams of the headlamps.
DESCRIPTION AND OPERATION
PARKING LAMPS
Circuit A3 in the Power Distribution Center (PDC)
connects to a bus bar in the fuse block. One of the
four circuits powered by the bus bar is circuit F33.
Circuit F33 connects to the headlamp switch. A 40
amp fuse in the PDC protects the A3 circuit. A 15
amp fuse, in cavity 2 of the fuse block, protects the
F33 circuit.
The headlamp switch has 3 positions, ON, PARK
(tail lamps) and OFF, plus a dimmer switch. When
the headlamp switch is in the PARK or ON position,
the switch connects circuit F33 to circuit L7. From
the headlamp switch, circuit L7 branches to power
the front parking lamps and rear tail lamps, lavalier
lamps, side marker lamps, and rear license plate
lamp.
GROUND CIRCUIT
Circuit Z1 provides ground for the parking lamps,
headlamps, lavalier lamps, tail lamps, side marker
lamps and rear license plate lamp although different
grounding points are used. Circuit Z1 also provides
the ground path for the headlamps and turn signals.
HELPFUL INFORMATION
²Check for a blown 40 amp fuse in the PDC.
²Check for a blown fuse in cavity 2 of the fuse
block.
²For the left front parking lamp, turn signal, side
marker lamp and left headlamp, the Z1 circuitgrounding point is the left side of the radiator closure
panel.
²For the right front parking lamp, turn signal,
side marker lamp and right headlamp, the Z1 circuit
grounding point is in the right fender side shield.
²Circuit L7 also feeds the radio, if equipped.
²When the headlamp switch is in the PARK or
ON position, the dimmer circuit, F33, also connects
to circuit E1. Circuit E1 powers the ash receiver
lamp, transmission range indicator lamp, instrument
panel cluster illumination lamps, HVAC control
lamp, heated rear window lamp, and radio lamp. A 4
amp fuse, in cavity 12 of the fuse block, protects cir-
cuit E1.
HEADLAMPS
The headlamp switch has 3 positions, ON, PARK
(parking lights) and OFF. Two circuits, L2 and L20
connect the headlamp switch to the headlamp dim-
mer/optical horn switch located in the multi-function
switch. The multi-function switch feeds the low and
high beams of the headlamps.
HEADLAMP SWITCH IN OFF OR PARKING
LAMP POSITION
Circuit A3 originates in the Power Distribution
Center (PDC) and supplies battery voltage for the
headlamp switch. A 40 amp fuse protects the A3 cir-
cuit. The headlamp switch has an internal 24 amp
circuit breaker that connects circuit A3 to either the
L2 or L20 circuits, depending on switch position.
In the OFF and PARK positions the headlamp
switch feeds the L20 circuit that connects to the
multi-function switch. Circuit L20 powers the high
beam circuit when the operator flashes the head-
lamps with the turn signal stalk of the multi-func-
tion switch. When the operator flashes the
headlamps with the stalk, the multi-function switch
connects the L20 circuit to the L3 circuit. The L3 cir-
cuit feeds the high beam of the headlamps.
HEADLAMP SWITCH IN ON POSITION
When the headlamp switch is in the ON position,
it connects the A3 circuit from the PDC to circuit L2.
PL8W - 50 FRONT LIGHTING 8W - 50 - 7

Downloaded from www.Manualslib.com manuals search engine 8W-51 REAR LIGHTING
INDEX
page page
DESCRIPTION AND OPERATION
BACK-UP LAMPS....................... 10
FOG LAMPS (REAR)...................... 9STOP LAMPS.......................... 10
TAIL LAMPS AND LICENSE LAMPS.......... 9
DESCRIPTION AND OPERATION
TAIL LAMPS AND LICENSE LAMPS
Circuit A3 in the Power Distribution Center (PDC)
connects to a bus bar in the fuse block. One of the
four circuits powered by the bus bar is circuit F33. A
40 amp fuse in the PDC protects the A3 circuit. A 15
amp fuse, in cavity number 2 of the fuse block, pro-
tects the F33 circuit.
The headlamp switch has 3 positions, ON, PARK
(tail lamps) and OFF, plus a dimmer switch. When
the headlamp switch is in the PARK or ON position,
it connects circuit F33 to circuit L7. From the head-
lamp switch, circuit L7 branches to power the front
parking lamps, rear tail lamps, side marker lamps,
and rear license plate lamp.
GROUND CIRCUIT
Circuit Z1 provides ground for the tail lamps, park-
ing lamps, headlamps, side marker lamps, lamps and
rear license plate lamps although different grounding
points are used. Circuit Z1 also provides the ground
path for the headlamps, stop lamps and turn signals.
HELPFUL INFORMATION
²Check for a blown 40 amp fuse in the PDC.
²Check for a blown fuse in cavity 2 of the fuse
block
²For the left rear parking lamp, turn signal, side
marker lamp, and the rear license plate the Z1 cir-
cuit grounding point is in the left rear wheel well.
²For the right rear parking lamp, turn signal and
side marker lamp, the Z1 circuit grounding point is
in the right rear wheel well.
²Circuit L7 also feeds the radio, if equipped.
²When the headlamp switch is in the PARK or
ON position, the dimmer circuit, F33, connects to cir-
cuit E1. Circuit E1 powers the ash receiver lamp,
transmission range indicator lamp, instrument panel
cluster illumination lamps, HVAC control lamp,
heated rear window lamp, and radio lamp. A 4 amp
fuse, in cavity 12 of the fuse block, protects circuit
E1.
FOG LAMPS (REAR)
The rear fog lamps will operate only when the
headlamp switch is in the ON position.
Circuit A3 from the Power Distribution Center sup-
plies (PDC) voltage to a bus bar in the fuse block.
Circuit F61 is one of four circuits that the bus bar
feeds and is protected by a 20 amp fuse in cavity 4.
Circuit F61 connects to the rear fog lamp switch and
the front fog lamp relay.
The fog lamp switch contains a relay that supplies
voltage to the fog lamps. Circuit L2 from the multi-
function switch supplies voltage to the coil side of the
relay (only when the headlamps operate on LOW
beam). Circuit F61 supplies voltage to the contact
side of the relay. During LOW beam headlamp oper-
ation when the fog lamp switch contacts CLOSE, cir-
cuit F61 connects to circuit L38.
Circuit L38 feeds right and left fog lamp. Circuit
L38 also feeds the green L.E.D. in the switch that
illuminates during fog lamps operation.
When the headlamp switch is in the PARK or ON
position, circuit E1 from the headlamp switch sup-
plies voltage for circuit E2. Circuit E2 contains a 4
amp fuse in cavity 12 of the fuse block, and powers
the bulb in the fog lamp switch.
GROUND CIRCUIT
Although circuit Z1 provides the ground path for
the fog lamps, the circuit has different grounding
points for each lamp.
Circuit Z3 supplies the ground path for the fog
lamp switch. The grounding point for the headlamp
switch is the instrument panel left center support.
HELPFUL INFORMATION
²Circuit Z1 also supplies ground for side marker
lamps, turn signals, parking lamps and headlamps.
²Circuit A3 from the PDC supplies voltage to the
headlamp switch for circuit L2.
²Circuit F33 from the fuse block supplies voltage
to the headlamp switch for circuit E1. Circuit A3
from the PDC supplies voltage to a bus bar in the
fuse block that feeds the F33 circuit. Fuse 2, in the
fuse block, protects the F33 circuit.
PL8W - 51 REAR LIGHTING 8W - 51 - 9

Downloaded from www.Manualslib.com manuals search engine 8W-52 TURN SIGNALS
INDEX
page page
DESCRIPTION AND OPERATION
HAZARD FLASHERS..................... 5TURN SIGNALS......................... 5
DESCRIPTION AND OPERATION
TURN SIGNALS
Voltage for the turn signals flows from the Power
Distribution Center (PDC) to the ignition switch on
circuit A2. With the key in the RUN position, the
ignition switch connects voltage from the A2 circuit
to the A22 circuit. A 40 amp fuse in the PDC protects
the A2 and A22 circuits.
Circuit A22 connects to a bus bar in the fuse block.
L5 is one of the circuits fed by the bus bar. Circuit
L5 contains a 10 amp fuse and supplies voltage to
the multi-function switch. The multi- function switch
supplies voltage to the combination flashing unit on
circuit L55. Voltage leaves the combination flashing
unit on circuit L32 and flows to the multi-function
switch connector.
RIGHT TURN SIGNAL
When the operator selects the right turn signal,
the multi-function connects power from circuit L32 to
circuits L60 and L62. Circuit L62 connects to the
multi-function switch and feeds the right rear turn
signal/hazard flasher/stop lamp.
Circuit L60 connects to the multi-function switch
and feeds the right front turn signal/hazard flasher
lamp and side marker lamp. Circuit L60 also splices
to power the turn signal indicator lamp on the
instrument cluster.
LEFT TURN SIGNAL
When the operator selects the left turn signal, the
multi-function connects power from circuit L32 to cir-
cuits L61 and L63. Circuit L63 connects to the multi-
function switch and feeds the left rear turn signal/
hazard flasher/stop lamp.
Circuit L61 connects to the multi-function switch
and feeds the left right front turn signal/hazard
flasher lamp and side marker lamp. Circuit L61 also
splices to power the turn signal indicator lamp on the
instrument cluster.
GROUND CIRCUIT
Circuit Z1 provides ground for all the turn signal
lamps, although the it has different grounding pointsfor each turn signal circuit. Circuit Z2 provides the
ground path for the combination flashing unit.
HELPFUL INFORMATION
²For the left front turn signal/hazard flasher
lamp, the Z1 circuit grounding point is the left side of
the radiator closure panel.
²For the right front turn signal/hazard flasher
lamp, the Z1 circuit grounding point is in the right
fender side shield.
²For the left rear turn signal/hazard flasher/stop
lamp, the Z1 circuit grounding point is in the left
rear wheel well.
²For the right rear turn signal/hazard flasher/
stop lamp, the Z1 circuit grounding point is in the
right rear wheel well.
²Circuit Z1 also supplies ground for the head-
lamps, parking lamps, rear license plate lamp,
back-up lamps and side marker lamps.
²The grounding point for circuit Z2 is the instru-
ment panel right center support. Circuit Z2 supplies
ground for the combination flashing unit.
²A 10 amp fuse, in cavity 6 of the fuse block, pro-
tects circuit L5.
²A 40 amp fuse in the PDC protects the A2 and
A22 circuits.
²The bus bar in the fuse block that connects to
circuit A22 and feeds circuit L5 for the turn signals
also powers three other fuse protected circuits. The
other circuits are C1, F20 and F25.
HAZARD FLASHERS
Circuit L9 from the Power Distribution Center
(PDC) supplies battery voltage for the hazard flash-
ers. A 10 amp fuse in the PDC protects circuit L9.
Circuit L9 connects to the multi-function switch.
With the hazard flashers ON, the multi-function
switch connects circuits L9 and L55.
Circuit L55 feeds the combination flashing unit.
Circuit Z2 provides ground for the flashing unit.
From the flashing unit, circuit L32 connects to the
multi-function switch. With the hazard flashers ON,
the multi-function switch connects circuit L32 to cir-
cuits L60, L61, L62, and L63.
PL8W - 52 TURN SIGNALS 8W - 52 - 5

Downloaded from www.Manualslib.com manuals search engine Circuit L60 supplies voltage to the right front turn
signal/hazard lamp. The L60 circuit splices to the
instrument cluster to power the right indicator lamp.
Circuit L61 supplies voltage to the left front turn
signal/hazard lamp. The L61 circuit splices to the
instrument cluster to power the left indicator lamp.
Circuit L62 supplies voltage to the right rear turn
signal/hazard flasher/stop lamp.
Circuit L63 supplies voltage to the left rear turn
signal/hazard/flasher/stop lamp.
GROUND CIRCUITS
Circuit Z3 provides ground for the instrument clus-
ter indicator lamps. The termination point for circuit
Z3 is the instrument panel left center support.
Circuit Z1 provides ground for all the turn signal/
hazard lamps, although the it has different ground-
ing points for each circuit. Circuit Z2 provides the
ground path for the combination flashing unit.
HELPFUL INFORMATION
²For the left front turn signal/hazard flasher
lamp the Z1 circuit grounding point is the left side of
the radiator closure panel.²For the right front turn signal/hazard flasher
lamp the Z1 circuit grounding point is in the right
fender side shield.
²For the left rear turn signal/hazard flasher/stop
lamp the Z1 circuit grounding point is in the left rear
wheel well.
²For the right rear turn signal/hazard flasher/
stop lamp the Z1 circuit grounding point is in the
right rear wheel well.
²Circuit Z1 also supplies ground for the head-
lamps, parking lamps, rear license plate lamp,
back-up lamps and side marker lamps.
²The grounding point for circuit Z2 is the instru-
ment panel right center support. Circuit Z2 supplies
ground for the combination flashing unit.
8W - 52 - 6 8W - 52 TURN SIGNALSPL
DESCRIPTION AND OPERATION (Continued)

Downloaded from www.Manualslib.com manuals search engine AC262
SWITCH IGNITION
SWITCH LAMP
WARNING
BRAKE INSTRUMENT
CLUSTER PARK
BRAKE
SWITCH
S208
G9
20
GY/BKG9
20
GY/BK
G9
22
GY/BK
G9
22
GY/BKG9
22
GY/BK
2C103
(8W-10-5)
(8W-40-5) (8W-40-5)
(8W-40-5)
PL-RHD8W-70 SPLICE INFORMATION 8W - 70 - 3
PLR07002978W-1

Downloaded from www.Manualslib.com manuals search engine 8W-80 CONNECTOR PIN-OUTS
INDEX
page
SCHEMATICS AND DIAGRAMS........................................................... 1
Component Page
A/C Compressor Clutch................8W-80-4
A/C Cycling switch...................8W-80-4
A/C-Heater Blower Motor..............8W-80-4
A/C-Heater Control Switch.............8W-80-4
A/C High Pressure Switch..............8W-80-4
A/C Low Ptressure Switch..............8W-80-5
ABS Hydraulic Modulator..............8W-80-5
ABS Relay Box......................8W-80-5
Airbag Control Module................8W-80-5
Ash Receiver lamp...................8W-80-6
Back-Up Lamp Switch (MTX)...........8W-80-6
Battery Temperature Sensor............8W-80-6
Blower Motor Resister Block............8W-80-6
Brake Warning Lamp Switch...........8W-80-6
C101..............................8W-80-7
C102..............................8W-80-7
C103..............................8W-80-7
C105..............................8W-80-8
C108..............................8W-80-8
C160..............................8W-80-8
C161..............................8W-80-8
C203..............................8W-80-9
C205..............................8W-80-9
C206..............................8W-80-9
C225..............................8W-80-9
C230.............................8W-80-10
C231.............................8W-80-10
C241.............................8W-80-10
C301.............................8W-80-11
C303.............................8W-80-11
C309.............................8W-80-11
C315.............................8W-80-11
C323.............................8W-80-11
C324.............................8W-80-11
C325.............................8W-80-12
C340.............................8W-80-12
C341.............................8W-80-12
Camshaft Position Sensor.............8W-80-12
Clockspring........................8W-80-12
Clutch Pedal Position Switch (MTX).....8W-80-12
Controller Anti-Lock Brake............8W-80-13
Crankshaft Position Sensor............8W-80-14
Data Link Connector.................8W-80-14
Dome Lamp........................8W-80-14
Downstream Heated Oxygen Sensor.....8W-80-15Component Page
Driver Side Airbag..................8W-80-15
Duty Cycle Evap/Purge Solenoid........8W-80-15
EGR Transducer solenoid.............8W-80-15
Engine Coolant Temperature
Sensor (ECT).....................8W-80-15
Engine Oil Pressure Switch............8W-80-16
Front Fog Lamp Switch...............8W-80-16
Fuel Injector No.1...................8W-80-16
Fuel Injector No.2...................8W-80-16
Fuel Injector No.3...................8W-80-16
Fuel Injector No.4...................8W-80-16
Fuel Pump Module..................8W-80-17
Generator.........................8W-80-17
Glove Box Lamp and Switch...........8W-80-17
Headlamp Dimmer and Optical
Horn Switch.....................8W-80-17
Headlamp Leveling Switch............8W-80-17
Headlamp Switch...................8W-80-17
Horn No.1.........................8W-80-18
Horn No.2.........................8W-80-18
(IAT/Map) Sensor...................8W-80-18
Idle Air Control Motor (IAC)...........8W-80-18
Ignition Coil Pack...................8W-80-18
Ignition Switch.....................8W-80-19
Immobilizer Engine Sensor............8W-80-19
Immobilizer Sensor..................8W-80-19
Instument Cluster - C1...............8W-80-19
Instument Cluster - C2...............8W-80-19
Intermittent Wipe/Wash Switch........8W-80-20
Key-In Switch......................8W-80-20
Knock Sensor......................8W-80-20
Left Airbag Impact Sensor.............8W-80-20
Left Back-Up Lamp..................8W-80-20
Left Door Lock Switch................8W-80-21
Left Door Window Motor..............8W-80-21
Left Fog Lamp......................8W-80-21
Left Front Door Lock Motor...........8W-80-21
Left Front Door Speaker..............8W-80-21
Left Front Wheel Speed Sensor.........8W-80-22
Left Headlamp.....................8W-80-22
Left Headlamp Leveling Motor.........8W-80-22
Left Instrument Panel Speaker
(Premium).......................8W-80-22
Left License Lamp...................8W-80-22
Left Park/Turn Signal Lamp...........8W-80-22
8W - 80 - 2 8W - 80 CONNECTOR PIN-OUTSPL