Ignition switch DODGE RAM 1500 1998 2.G Repair Manual

DODGE RAM 1500 1998 2.G Repair Manual RAM 1500 1998 2.G DODGE DODGE https://www.carmanualsonline.info/img/12/5702/w960_5702-0.png DODGE RAM 1500 1998 2.G Repair Manual

Page 519 of 2627

DODGE RAM 1500 1998 2.G Repair Manual INPUT AND OUTPUT CIRCUITS
HARD WIRED INPUTS
The hard wired inputs to the EMIC include the fol-
lowing:
²Brake Lamp Switch Output
²Driver Cylinder Lock Switch Sense
²Driver Door Ajar Switch Sense
²

Page 520 of 2627

DODGE RAM 1500 1998 2.G Repair Manual CAUTION: Instrument clusters used in this model
automatically configure themselves for compatibil-
ity with the features and optional equipment in the
vehicle in which they are initially installed. Th

Page 521 of 2627

DODGE RAM 1500 1998 2.G Repair Manual ACTUATOR TEST
WARNING: TO AVOID PERSONAL INJURY OR
DEATH, ON VEHICLES EQUIPPED WITH AIRBAGS,
DISABLE THE SUPPLEMENTAL RESTRAINT SYS-
TEM BEFORE ATTEMPTING ANY STEERING
WHEEL, STEERING COLUMN, AIRBAG,

Page 523 of 2627

DODGE RAM 1500 1998 2.G Repair Manual INSTRUMENT CLUSTER FAILURE MESSAGE
Fault Code Description Correction
AC ABS messages not received. Refer to the appropriate diagnostic information.
AD FCM messages not received. Refer to the appropria

Page 526 of 2627

DODGE RAM 1500 1998 2.G Repair Manual NOTE: Certain indicators in this instrument cluster
are automatically configured. This feature allows
those indicators to be activated or deactivated for
compatibility with certain optional equipment.

Page 527 of 2627

DODGE RAM 1500 1998 2.G Repair Manual Each time the ABS indicator fails to light due to an
open or short in the cluster ABS indicator circuit, the
cluster sends a message notifying the CAB of the
condition, then the instrument cluster and

Page 528 of 2627

DODGE RAM 1500 1998 2.G Repair Manual BRAKE/PARK BRAKE
INDICATOR
DESCRIPTION
A brake indicator is standard equipment on all
instrument clusters (Fig. 10). The brake indicator is
located near the lower edge of the instrument cluster,
betwe

Page 529 of 2627

DODGE RAM 1500 1998 2.G Repair Manual DIAGNOSIS AND TESTING - BRAKE INDICATOR
The diagnosis found here addresses an inoperative
brake indicator condition. If there are problems with
several indicators in the instrument cluster, (Refer to

Page 530 of 2627

DODGE RAM 1500 1998 2.G Repair Manual cluster programming, a hard wired multiplex input
received by the cluster from the headlamp panel
lamps dimmer switch on the headlamp dimmer
switch mux circuit, and electronic unlock request
messages

Page 531 of 2627

DODGE RAM 1500 1998 2.G Repair Manual ²Engine Temperature High Message- Each
time the cluster receives a message from the PCM or
ECM indicating the engine coolant temperature of a
gasoline engine is about 122É C (252É F) or higher, or