clutch DODGE VIPER 2006 ZB / 2.G User Guide

Chassis
Component Fluid, Lubricant, or Genuine Part
Transmission Mopar Synthetic Manual Transmission Lubricant SAE 75W-85 (Castrol Syn-
torq LT 75W/85)
Rear Axle Mopar Synthetic Gear and Axle Lubricant SAE 75W-140 or equivalent, with
Limited Slip Additive Friction Modifier
Brake Master Cylinder MoparBrake & Clutch Fluid DOT 4 Motor Vehicle or equivalent.
Power Steering Reservoir MoparATF+4 Automatic Transmission Fluid or equivalent.
222 MAINTAINING YOUR VEHICLE

Miles 21,000 24,000 27,000 30,000 33,000 36,000
(Kilometers) (35 000) (40 000) (45 000) (50 000) (55 000) (60 000)
Change engine oil and engine oil filter, if not
replaced at 3 months.XXXXX X
Lubricate the front and rear suspension ball
joints.X
Inspect the brake linings. X X
Change the front and rear axle fluid. X X
Inspect and replace, if necessary, theair
cleaner filter.X
Replace thespark plugs.X
Change the transmission fluid. X
Inspect and replace, if necessary, thePCV ori-
fice.*X
Change the brake and clutch fluid. X
SCHEDULE “B” 231
8
M
A
I
N
T
E
N
A
N
C
E
S
C
H
E
D
U
L
E
S

Miles 57,000 60,000 63,000 66,000 69,000 72,000
(Kilometers) (95 000) (100 000) (105 000) (110 000) (115 000) (120 000)
Change engine oil and engine oil filter, if not replaced
at 3 months.XXXXX X
Lubricate the front and rear suspension ball joints. X
Change the front and rear axle fluid. X X
Inspect the brake linings. X X
Inspect and replace, if necessary, theair cleaner filter.X
Replace thespark plugs.X
Replace theignition cables.X
Inspect and replace, if necessary, thePCV orifice.
*X
Inspect and replace the Auto Tension Drive Belt as
needed.X
Change the brake and clutch fluid. X
Change the transmission fluid. X
Flush and replace engine coolant at 60 months, if not
done at 102,000 miles.X
SCHEDULE “B” 233
8
M
A
I
N
T
E
N
A
N
C
E
S
C
H
E
D
U
L
E
S

Miles 75,000 78,000 81,000 84,000 87,000 90,000
(Kilometers) (125 000) (130 000) (135 000) (140 000) (145 000) (150 000)
Change engine oil and engine oil filter, if not
replaced at 3 months.XXXXX X
Lubricate the front and rear suspension ball
joints.XX
Inspect the brake linings. X
Change the front and rear axle fluid. X
Inspect and replace, if necessary, theair
cleaner filter.XX
Replace thespark plugs.X
Change the brake and clutch fluid.X
Inspect and replace, if necessary, thePCV ori-
fice.*X
Inspect and replace the Auto Tension Drive
Belt as needed. ‡XX
Change the transmission fluid. X
234 SCHEDULE “B”
8
M
A
I
N
T
E
N
A
N
C
E
S
C
H
E
D
U
L
E
S

Fueling............................... 152
Fuses................................ 203
GasCap .............................. 152
Gasoline.............................. 148
Gasoline, Clean Air...................... 149
Gasoline, Reformulated................... 149
Gasoline/Oxygenate Blends................ 149
Gauges................................ 96
Coolant Temperature..................94,96
Fuel................................ 97
Oil Pressure........................... 96
Speedometer.......................... 90
Tachometer........................... 96
Voltmeter............................ 97
General Information...................... 19
Glass Cleaning.......................... 201
Ground Clearance....................... 148Hazard Warning Flasher.................91,156
Headlights............................ 214
Aiming............................. 219
High Beam........................... 80
High Beam/Low Beam Select Switch......... 80
Passing.............................. 80
Switch............................... 78
Time Delay........................... 79
Heater................................ 111
High Beam Indicator...................... 93
Hood Latch Maintenance.................. 188
Hood Release........................... 73
Hoses.............................195,196
Hydraulic Clutch Fluid.................... 198
Ignition
Key ................................. 12
Timing.............................. 178
Wiring System........................ 178
INDEX 255
10