charging FIAT 500 1969 1.G Workshop Manual

FIAT 500 1969 1.G Workshop Manual 500 1969 1.G FIAT FIAT https://www.carmanualsonline.info/img/10/4482/w960_4482-0.png FIAT 500 1969 1.G Workshop Manual

Page 104 of 128

FIAT 500 1969 1.G Workshop Manual CHAPTER 11
THE ELECTRICAL EQUIPMENT
11:1 Description
11:2 Battery
11:3 The generator
11:4 The starter
11:5 The control box
1 1 : 6 Fuses
1 1 : 7 Flasher unit
11:1 Description
All models covered by thi

Page 105 of 128

FIAT 500 1969 1.G Workshop Manual FIG 11:1 Battery location
CLAMP LOCKING NUTSIGNITION LOCK !
SWITCH CABLE*"? BATTERY CLAMP MINUS GROUND CABLE
STARTING MOTOR
PLUS CABLE
65
4 3
2 1
FIG 11:2 Cross-section view of battery
Key to  Fig  11

Page 110 of 128

FIAT 500 1969 1.G Workshop Manual Checking cut-out:
1 Closing voltage:
This test should be carried out at a temperature of
25°±10°C and the regulator should be connected to a
generator test bed as shown in FIG 11:7. The unit should

Page 111 of 128

FIAT 500 1969 1.G Workshop Manual Checking cut-out:
1 Closing voltage:
This test should be carried out at a temperature of
25°±10°C and the regulator should be connected to a
generator test bed as shown in FIG 11:7. The unit should

Page 115 of 128

FIAT 500 1969 1.G Workshop Manual FIG 11:18 Replacement of bulb from inside f r o n tcompartment
Key to  Fig 11 :18 1 Double-filament bulb 2 Bulbholder
3 Side direction indicator light 4 Bulbholder shield
PARKING LAMP
LENS
SIDE  DIREC

Page 117 of 128

FIAT 500 1969 1.G Workshop Manual Before removing an apparently faulty horn check the
wiring and connections. Check that the mounting bolts
are tight and that the  horn does not foul any adjacent part.
Removal and installation:
This i