battery replacement FIAT 500 1971 1.G Workshop Manual

FIAT 500 1971 1.G Workshop Manual 500 1971 1.G FIAT FIAT https://www.carmanualsonline.info/img/10/4482/w960_4482-0.png FIAT 500 1971 1.G Workshop Manual

Page 42 of 128

FIAT 500 1971 1.G Workshop Manual a n  0—20  v o ltmeter. If the circuit is in order the meter
should read approximately 12-volts.
3  Battery to fuse box terminal 30. Connect the volt-
meter between the terminal 30 and  earth.  No r

Page 67 of 128

FIAT 500 1971 1.G Workshop Manual TOOL A  62039
TOOLA. 62040 PIN  WRENCH  A.  52022
FIG 6:15  Adjusting ring gear-to-pinion backlash and
differential bearing play, using special wrench A.52022
reading on the dial gauge should be betwe

Page 108 of 128

FIAT 500 1971 1.G Workshop Manual switch contacts. The starter motor rotates driving the
engine through the pinion and ring gear. As soon as the
engine fires the starter hand  lever must be released which
will open the starter switch

Page 115 of 128

FIAT 500 1971 1.G Workshop Manual FIG 11:18 Replacement of bulb from inside f r o n tcompartment
Key to  Fig 11 :18 1 Double-filament bulb 2 Bulbholder
3 Side direction indicator light 4 Bulbholder shield
PARKING LAMP
LENS
SIDE  DIREC