USB port FIAT 500 ABARTH 2012 2.G Blue And Me User Guide

Repeat
Use the Repeat option to repeat a track.
To activate the Repeat option using manual interaction,
proceed as follows:
Open the Main Menu, select MEDIA PLAYER, SET-
TINGS, REPEAT and then press thePRESET UP/OK
button.
To activate the Repeat option, select REPEAT ON and
press thePRESET UP/OKbutton. To deactivate it, select
REPEAT OFF and press thePRESET UP/OKbutton.
Or, using voice interaction:
Press the
and say“Repeat on”or“Repeat off”.
NOTE:With the Repeat option on, the previous and
next commands will play the previous or next track and
the new track will be repeated.
Exit the settings menu
At the end of any of the operations described above, you
can exit the SETTINGS menu as described below or the
message will disappear from the display in less than
10 seconds.
To exit the SETTINGS menu using manual interaction:
Select EXIT and then press thePRESET UP/OKbutton.
BLUE&ME™ HANDS-FREE COMMUNICATION
SUPPORTED MOBILE PHONES
BLUE&ME™Hands-Free Communication supports
your personal devices viaBluetoothwireless technol-
ogy and USB.
To get updated information about devices supported by
BLUE&ME™, contact a FIAT Dealership or consult the
dedicated website at www.fiatusa.com.
68 BLUE&ME™ User’s Manual

Mobile phones with message reader (not all
mobile phones support reading incoming SMS
messages)
If your mobile phone can send messages through the
Bluetoothwireless technology, it is possible to read
incoming messages using theBLUE&ME™Hands-Free
Communication Package, to store them in the dedicated
inbox or to delete them.
Supported USB Memory Devices
USB Memory Devices
The media player supports most USB memory devices.
1.0, 1.1 or 2.0.
NOTE:It is not possible to use USB devices equipped
with a “password” function.
Supported digital audio files
The media player supports audio files with the following
formats:
Extension Audio Coding
.wma Windows Media Audio Decode
(Format Tag: WMA2 = 353,
WMA1=352) Decodes all CBR pro-
files from 5kbps to 192kbps, 8kHz
to 48kHz, mono and stereo De-
codes all v9 CBR profiles, from
5kbps to 320kbps, 8kHz to 48kHz,
mono and stereo Decodes all qual-
ity based, bit rate based and peak
constrained VBR profiles Supports
WMA v1 and WMA v2 bit streams
70 BLUE&ME™ User’s Manual

Extension Audio Coding
.mp3 MP3 in two forms: MPEG-1 Layer
3 (sampling rates 32 kHz, 44.1 kHz
and 48 kHz) and MPEG-2 Layer 3
(16 kHz, 22.05 kHz and 24 kHz).
Supports the proprietary Fraun-
hofer extension called “MP2.5”,
which adds even lower sampling
rates (8 kHz, 11.025 kHz and
12 kHz). ISO compliance with the
following bitrates (kbps): 16, 32,
64, 96, 128, 192. Both Mono and
Stereo. And Layer 3, VBR and CBR
support.
.wav Digital audio file, without data
compression.
.aac MPEG-4, M4A support Sampling
rates: 8, 11, 16, 22, 24, 32, 44,
48 kHz Bitrates: 16, 32, 48, 64, 80,
96, 112, 128, 160, 192, 224, 256 kbpsNOTE:The media player does not support audio files
compressed with other formats and DRM (Digital Right
Management) protected audio files. Non-supported au-
dio files that may be present on the USB device will be
ignored.
1
BLUE&ME™ User’s Manual 71

Media Player
Problem Probable Cause Possible Solution
Displayed message: NO MEDIA
andBLUE&ME™says: “No media
found”•No USB device is connected to the
USB port in the car
•No digital audio files are stored
on the USB memory device
•If power is interrupted, (e.g., car
battery disconnection),
BLUE&ME™will rebuild the me-
dia library•Connect your USB device to
BLUE&ME™
•Store digital audio files on your
USB memory devices following
the instructions given by your
media file software
•Remove the USB device from the
USB port and replace it to rebuild
the media library again
•Check whether your USB device
is supported byBLUE&ME™
After connecting your USB device
and turning the ignition key to ON,
no music is played•Autoplay may be set to off•Set Autoplay to on, remove and
then replace the USB device
•Press the
button and say
“PlayMedia playback should
start
94 BLUE&ME™ User’s Manual

Problem Probable Cause Possible Solution
BLUE&ME™does not play all
the digital audio files in the play-
list•Your playlist contains DRM-
protected files that cannot be
played, or it contains references to
invalid media files•For further details refer to “SUP-
PORTED USB MEMORY DE-
VICES”
The media library does not show
all the digital audio files stored
on the USB device•Your playlist contains DRM pro-
tected files that are ignored during
playback
•Your playlist contains more than
20,000 tracks, that is the maximum
number of files that can be copied
to the media library
•The playlist stored on your USB
device contains more than 20
nested folders. Nested folders files
will not be copied to the media
library•Reduce the number of tracks on
the USB device.
•Reduce the number of nested fold-
ers on the USB device
1
BLUE&ME™ User’s Manual 97

iPod
Problem Probable Cause Possible Solution
iPodis not working (for
iPodclassic models prior
to the 5th generation, the
iPodMini and iPod
shuffle devices)•The iPodhas not been enabled for
use as a disc
•It has been enabled for use as a disc
but there are tracks inside in Mp4 for-
mat (these formats are not supported
byBLUE&ME™)
•There are DRM protected tracks on
the iPodpurchased from the iTunes
site (the system does not support pro-
tected tracks such as those in DRM
format that can be purchased from the
iTunes store site)•Use an alternative USB memory stick
or reset the iPod
•Enable usage as a disc
•Modify the track format to one that is
compatible withBLUE&ME™
iPodnot working (for
iPodclassic models from
the 5th generation forward,
iPodTouch, and iPhone
devices)Use an alternative USB memory stick or
reset the iPod1
BLUE&ME™ User’s Manual 99

•Can I have 2 phones both paired to theBLUE&ME™
system at the same time?
Yes, you can pair up to a total of 5 phones, but only
one can be linked at anytime. The most recently paired
mobile phone will be the primary phone.
•Why does theBLUE&ME™system say “phonebook
copy in progress” when I first try to make a call after
getting into the vehicle?
Depending on the size of your phonebook,
BLUE&ME™may take some time to download or
check for updates. So, if you try to immediately make
a phone call after getting into the vehicle, the
BLUE&ME™system may tell you to wait.
BLUE&ME™ Media Player – Quick Tips
•
How do I use theBLUE&ME™Media Player? There
are three methods:
Voice Recognition
Steering Wheel Buttons (located on the front and
rear of the steering wheel)
Using the controls on the device itself
•Why is the USB Port and AUX Port in the glove box?
To provide you more security for your personal
media devices. Even though your media device is in
the glove box you can still operate that device by use
of the Steering Wheel Buttons.
•My iPod/iPhone is not recognized by the Media
Player System, or is recognized, then lost.
110 BLUE&ME™ User’s Manual

Insure that the software on your iPod/iPhone is up
to date and contact your local FIAT Dealership for
possible software updates to theBLUE&ME™system.
•The USB begins to play regardless of the last source I
had selected.
With theAUTOPLAYfeature turned on, the system
will always switch to the USB device if a device is
already plugged in.
•The volume changes significantly when I switch be-
tween the Media Player and AM/FM/SAT ?
The audio level depends on the quality of the music
and how the music was recorded onto the media
device.
BLUE&ME™ Message Reader – Quick Tips
•
TheBLUE&ME™SMS Text Message Reader does not
appear to be working?
This feature is only available on select mobile
phones. Please refer to the list of supported phones on
the www.fiatusa.com website, and select the
BLUE&ME™icon. Or contact the FIAT Customer
Center at 1-888-CIAO-FIAT (1-888-242-6342)
1
BLUE&ME™ User’s Manual 111