pairing phone FIAT 500 ABARTH 2012 2.G Blue And Me User Guide

“Delete”. The system will delete the last group of num-
bers and display the partially dialed phone number.
Then, you can say the digit group again and also the
remaining phone number digits.
To cancel the phone call, say“Cancel”.
To cancel the phone call and start dialing again, say
“Start over”.
To ask the system to repeat the recognized phone num-
ber, say“Repeat”. If no phone number was dialed, the
system says“No number available”.
If the repeated phone number is correct, say“Dial”to
start the call.
NOTE:When connected toBLUE&ME™and dialing a
phone number by voice commands, it is essential to
minimize background noise in the car and to ask the
other passengers to keep silent while you are speaking
the digits. Since the system is speaker independent, it canalso recognize other voices; there is a risk that some
numbers will be accidentally recognized, added to cor-
rect numbers or not recognized.
Dialing a phone number using the mobile phone
keypad
Alternatively, you can dial a phone number using your
mobile phone keypad and then continue your conversa-
tion using the hands-free communication system.
It is a requirement that you create a pairing relationship
and that the mobile phone is within range of the hands-
free communication system of your car.
To dial a phone number using your mobile phone key-
pad, proceed as follows:
•Dial the phone number on your mobile phone keypad
and connect the phone call following the procedure
required by your mobile phone.
36 BLUE&ME™ User’s Manual

the vehicle is moving, you can use voice commands only.
Instructions are provided for both methods.
NOTE:If you encounter difficulties with any of the
BLUE&ME™settings, refer to TROUBLESHOOTING.
Pairing a Mobile Phone
Before you can use your mobile phone with the hands-
free communication function on your car, you must
create a pairing relationship between the mobile phone
and the hands-free communication system.
During the pairing procedure, the hands-free communi-
cation system attempts to detect aBluetoothwireless
technology enabled mobile phone within range, and then
establishes the connection using a Personal Identification
Number (PIN). After a pairing relationship is established,
you can use the hands-free communication system to
make and receive phone calls, and do other operations
via your wirelessly-connected mobile phone.NOTE:Some mobile phones may require a setting
change or access permission change in order for
BLUE&ME™to automatically reconnect. See your mo-
bile phones manual for more information.
IMPORTANT!The mobile phone pairing PIN number is
a special PIN generated randomly at each new pairing
and used just for this operation. It is not your SIM PIN
and therefore it is not required to store or to keep it in
mind; losing it will not impair the hands-free communi-
cation system operation.
The pairing procedure will only need to be performed
once for your mobile phone. After this procedure
BLUE&ME™will automatically connect to your phone
each time you get into the car and turn the ignition key to
ON.
You can create a pairing relationship using thePAIRING
option in theSETTINGSmenu.
1
BLUE&ME™ User’s Manual 57

To create a pairing relationship using manual interaction,
proceed as follows:
Press the
/MAINbutton to open the Main Menu, then
selectSETTINGSby pressing thePRESET UP/OKbut-
ton.
SelectPAIRINGand then press thePRESET UP/OK
button. The system will start the pairing procedure.
BLUE&ME™will show the mobile phone pairing PIN
on the instrument panel display and announces it. Please
note that this is a PIN used just for this operation; it is not
your SIM PIN.
For the next two steps, consult your mobile phone
owner ’s manual aboutBluetoothpairing.
On your mobile phone, query forBluetoothwireless
technology enabled mobile phones that are within range
(this option on your mobile phone might be called
Discover, New Device, etc.). View the list ofBluetoothwireless technology enabled mobile phones and select
BLUE&ME™(item that identifiesBLUE&ME™on your
car).
When prompted by the mobile phone, enter the PIN
number shown on the instrument panel display. If pair-
ing is successful, the system will say“Connecting”and
then the display will show the paired mobile phone ID.
It is of vital importance to wait until this confirmation
message is displayed, since pressing the
/MAIN
button or the
/ESCbutton will cancel the pairing
process. If pairing fails, an error message will be dis-
played and the pairing procedure needs to be repeated.
After pairing, the system will say“Welcome”immedi-
ately after connecting. This message will no longer be
heard the next time the phone connects to the system.
The system will ask if you would like to copy your paired
phone’s phonebook. It is recommended to copy it. To
58 BLUE&ME™ User’s Manual

start copying the phonebook, press thePRESET UP/OK
button; otherwise press the
/ESCbutton. You can
download your phonebook at a later time using the
menu optionSETTINGS, USER DATA, or PHONE-
BOOK.
Or, using voice interaction:
Press the
button and say“Settings”,wait for the
tone then say“Pairing”.
The system shows the mobile phone pairing PIN on the
instrument panel display and repeats it.
For the next two steps, consult your mobile phone
owner ’s manual aboutBluetoothpairing.
On your mobile phone, query forBluetoothwireless
technology enabled mobile phones that are within range
(this option on your mobile phone might be called
Discover, New Device, etc.). View the list ofBluetoothwireless technology enabled mobile phones and select “
BLUE&ME™” (item that identifies the hands-free com-
munication package in your car).
When prompted by the mobile phone, enter the PIN
number shown on the instrument panel display using
your mobile phone keypad. If pairing is successful, the
system will say“Connecting”and then the display will
show the paired mobile phone ID.
It is of vital importance to wait until this confirmation
message is displayed, since pressing the
/MAINor
/ESCbuttons at this time may cancel the pairing
process. If pairing fails, an error message will be dis-
played and the pairing procedure needs to be repeated.
The first time a phone connect to the system, the system
will say“Welcome”immediately after connecting. This
message will no longer be heard the next time the phone
connects to the system.
1
BLUE&ME™ User’s Manual 59

NOTE:
•You only need to pair your mobile phone a single time.
•You can pair up to five mobile phones, but only one
phone can be used at a time. To use one of the other
paired phones, the currently connected phone needs to
be powered off or it’sBluetoothsetting must be
turned off.BLUE&ME™will then search the paired
phone list looking for a phone to connect to.
•On your paired mobile phone, theBluetoothsetting
must be turned on in order to connect your mobile
phone withBLUE&ME™Hands-Free Communica-
tion.
•Before transferring your mobile phone contacts to the
hands-free communication system, make sure that
each contacts first and last name is unique and dis-
tinctly recognizable to improve the voice recognition
results.
•Depending on the size of your phonebook,
BLUE&ME™may take some time to download or
check for updates. So, if you try to immediately make
a phone call after getting into the vehicle, the
BLUE&ME™system may tell you to wait.
•The system will download only valid contact entries.
A valid contact entry must include both a name and at
least one phone number.
•If you would like to re-pair your mobile phone, delete
the old pairing relationship first. During this operation
all paired phones and their associated phonebook
information will be deleted. To delete a paired phone
from the system, from theUSER DATAmenu, select
DELETE USERS. On your mobile phone, delete
BLUE&ME™from the list ofBluetoothmobile
phones following the specific instructions for your
mobile phone (refer to your mobile phone owner ’s
manual).
1
BLUE&ME™ User’s Manual 61

•If you download a phonebook with a contacts list
including more than 1000 contacts, the system may
operate slower than expected and voice recognition of
the names in your phonebook may be degraded.
•If the pairing list is accidentally deleted, the pairing
procedure will be repeated.
Managing User Data
You can manage the user data used byBLUE&ME™by
entering theUSER DATAmenu. The phonebook can be
deleted, all paired phones and their associated phone-
book data can be deleted, or all data can be deleted. If all
data is deleted then the memory inBLUE&ME™will be
restored to it’s initial empty condition. If the phonebook
had not been previously downloads during the phone’s
initial pairing then you can choose to download it now or
you can copy individual contacts from you phone toBLUE&ME™. Not all phones support phonebook down-
loading or copying individual contacts. Consult www-
.fiatusa.com for further information on the list of com-
patible mobile phones.
To open theUSER DATAmenu using manual interac-
tion, proceed as follows:
Press the
/MAINbutton to open the Main Menu, then
selectSETTINGSby pressing thePRESET UP/OKbut-
ton.
Select theUSER DATAand then press thePRESET
UP/OKbutton.
Or, using voice interaction:
Press the
button and say“Settings”.Wait until
after the tone then say“User data”.
In theUSER DATAmenu you can perform the following
functions described below.
62 BLUE&ME™ User’s Manual

Delete user data
In theUSER DATAmenu you can delete the pairing list.
After you delete the pairing list, you cannot use an
unpaired phone with the hands-free communication sys-
tem, or its phonebook, until you re-pair it. Always
remember that this operation deletes all the devices from
the pairing list.
To delete user data using manual interaction, proceed as
follows:
SelectDELETE USERSand then press thePRESET
UP/OKbutton.
The system will display the messageDELETE USERS?.
To confirm, press thePRESET UP/OKbutton.
Or, using voice interaction:
Press the
, say“Settings”,wait for the tone then say
“Delete users”.The system will ask“Delete all paired users?”.To
confirm, say“Yes”.
NOTE:
•Always remember that if a mobile phone is paired
with the system while another phone is connected, the
connection with the current phone is ended to estab-
lish a connection with the new phone.
•It is not possible to delete the pairing relationship with
a single phone on the pairing list unless it is the only
phone present on the pairing list.
•If all paired users are deleted from the pairing list then
each phone must be re-paired before it can be used
withBLUE&ME™again.
Delete the phonebook
In theUSER DATAmenu you can delete the phonebook
data that was downloaded to the system.
1
BLUE&ME™ User’s Manual 63

To delete the phonebook using manual interaction, pro-
ceed as follows:
SelectDEL. PHONEBOOKand then press thePRESET
UP/OKbutton.
The system will display the questionDEL. PHONE-
BOOK?. To confirm, press thePRESET UP/OKbutton
Or, using voice interaction:
Press the
button and say“Settings”wait for the
tone and then say“Delete phonebook”.
The system will ask“Delete copy of phonebook from
the system?”To confirm, say“Yes”.
Download the phonebook
If you chose not to download the phonebook during the
phone pairing procedure, or if you recently deleted the
current phonebook, theUSER DATAoption will be
available in thePHONEBOOKmenu.To download a paired mobile phone phonebook using
manual interaction, proceed as follows:
SelectPHONEBOOKand then press thePRESET
UP/OKbutton.
Or, using voice interaction
Press the
button and say“Settings”,wait for the
tone and then say“Download phonebook”.
Add contacts
To copy contacts from your mobile phone to the hands-
free communication system using manual interaction,
proceed as follows:
SelectADD CONTACTSand then press thePRESET
UP/OKbutton.
Or, using voice interaction:
Press the
button and say“Settings”,wait for the
tone and say“Add Contacts”.
64 BLUE&ME™ User’s Manual

Mobile Phones With BluetoothWireless
Technology
BLUE&ME™Hands-Free Communication supports
most mobile phones withBluetooth1.1 and Hands-Free
1.5 profile support (refer to theBluetoothwireless
connection specifications given in your mobile phone
owner ’s manual).
Due to the different software versions supported on
mobile phones, certain functions (e.g., answering a sec-
ond incoming phone call, transferring phone a phone call
from hands-free communication system to mobile phone
and vice versa, etc.) may not be supported as described in
this manual. In any case, phone conversation using the
hands-free communication package will not be impaired.
“Pull” phones
“Pull” phone means that your mobile phone supports
automatic phonebook download withBluetoothwire-
less technology, your whole phonebook will be automati-
cally downloaded toBLUE&ME™during the initial
phone pairing procedure and updated every time your
phone connects toBLUE&ME™.
To consult the list of mobile phones and functions
supported, consult the dedicated website at www.fia-
tusa.com or Customer Services on 888-CIAO-FIAT
(888-242-6342).
“Push” phones (phonebook not automatically
downloaded)
“Push” phone means that your mobile phone supports
single contact download withBluetoothwireless tech-
nology. After the pairing process you will need to go to
the USER DATA, ADD CONTACTS menu to send phone-
book contacts from your mobile phone toBLUE&ME™.
1
BLUE&ME™ User’s Manual 69

Problem Probable Cause Possible Solution
Display screen shows:
PAIR. FAILED and the
system says “Pairing un-
successful. Please try
again.”•A technical error occurred during the
pairing procedure•Verify the correct PIN number, and try
entering it again
•Reset the mobile phone by turning it
off and on, and then retry the pairing
procedure – see the section SETTING
FUNCTIONS - PAIRING YOUR MO-
BILE PHONE
Display screen shows:
PRIVATE NUMBER•The caller is not recognized as a name
stored in the phonebook, or the paired
mobile phone does not have a called ID
feature
•The caller has blocked caller ID to pre-
vent the system from displaying the
caller ’s name and/or phone number•Enter a contact in your mobile phone-
book for the incoming call, and then
download your phonebook or contact
again
•For phones with no caller ID support
or for calls from callers with caller ID
blocked, nothing can be done and the
message will always appear
86 BLUE&ME™ User’s Manual