wheel FIAT 500 ABARTH 2012 2.G Blue And Me Service Manual

Previous Track
To play the previous track using manual interaction,
proceed as follows:
While playing a digital track press the Scan Down
rear steering wheel button.
Or, using voice interaction:
While playing a digital track, press the
steering
wheel button and say“Previous”.
NOTE:If the“Previous”track (manual or voice) com-
mand is given after playing the first 3 seconds of the
track, the track will be started over. If it is given within
the first 3 seconds, the previous track will be played.
Changing audio sources
To change the current sound source (Radio, CD, CD
Changer, Media player), press thePRESET UP/OKbut-
ton on the rear of the steering wheel orFM, AM or
MEDIAbuttons on the radio.NOTE:For further details on voice commands (key-
words) to be used with the media player, refer to VOICE
COMMANDS (KEYWORDS) - SUMMARY.
iPodcompatibility
What I can do
•Listen to tracks in digital quality
•Select tracks by category (Artist, Album, Genre, etc.)
by voice control or using the controls on the steering
wheel
•Recharge the iPodvia USB
NOTE:
•The device must be in playback mode or paused to
start playing a track on some iPod/iPhone models.
•Load the tracks onto the iPod/iPhone device using
the procedure specified in the device manual.
•It is advisable to keep telephones and iPods updated
for optimal operation with theBLUE&ME™system.
54 BLUE&ME™ User’s Manual

Building playlists for BLUE&ME™ Hands-Free
Communication
For building.m3u or.wpl playlist forBLUE&ME™using
MicrosoftWindows MediaPlayer, proceed as follows:
•Copy required tracks into a new folder or to your USB
memory device.
•Open MicrosoftWindows MediaPlayer. SelectFile
, and thenOpenfrom the menu.
•Scroll the content of the USB device/iPodconnected
to your computer and select the audio files to be
entered in the playlist (only available on certain iPod
devices).
•Click onOpen.
•Move toFileand selectSave Now Playing List As....
In fieldFile Nameenter the required name and in field
Save as typeset the type:.wpl or.m3u.
•Click onSave.
When the above steps are complete, the new file.m3u
or.wpl will be built.
SETTING FUNCTIONS
TheSETTINGSmenu enables you to perform the fol-
lowing functions:
•Pair a mobile phone
•Manage user data
•Change the Media player settings
•View the Advanced options
NOTE:The settings submenu are only accessed by
using the steering wheel buttons.
To perform functions and adjustments in theSETTINGS
menu, you may use the buttons on the steering wheel or
voice commands while the vehicle is not moving. When
56 BLUE&ME™ User’s Manual

Problem Probable Cause Possible Solution
iPodcontinues playing the
same track or the “forward”
button has to be pressed to
move on to the next track•The repetition function for each indi-
vidual track may have inadvertently
been activated
•When browsing music by a selecting
playback mode, the selected artist,
album, genre or playlist may contain
only 1 track.There is a specific item in the menu, like
“continuous play” or “individual track
repetition”, which must be deactivated
Proceed with the deactivation:
•press the controls activation button on
the steering wheel
•when requested by the system, say
“Repeat Off” in a clear tone
•wait for voice confirmation by the sys-
tem which will say “Repeat Off”
•wait for voice confirmation by the sys-
tem which will say “Repeat Off” Se-
lect another playback mode or use the
“Play Anything” voice recognition
command
The iPodconnected to the
BLUE&ME™is not
charged•When the ignition is ON the car re-
charges the iPodunless the iPodis
completely run down•Remember that your iPodmust have
some charge or wait a few minutes
until the system recharges it
100 BLUE&ME™ User’s Manual

QUICK TIPS – FREQUENTLY ASKED QUESTIONS
What Can I Do With My BLUE&ME™ Hands-Free
Communication Package?
•
Make phone calls usingBLUE&ME™Hands-Free
Communication
•Listen to music from a USB stick or iPodthrough the
BLUE&ME™Media Player
•Read SMS Text Messages communicated through the
BLUE&ME™Message Reader (only available with
certain mobile phones)
•Control your FIAT TomTom PND (Personal Naviga-
tion Device) (If Equipped)
BLUE&ME™ Hands-Free Communication – Quick
Tips
•
If I have questions and cannot find the answer in the
BLUE&ME™User’s Guide, is there anyone I can call?
Yes, you can contact the FIAT Customer Center at
1-888-CIAO-FIAT (1-888-242-6342).
•If I know the series of commands I wish to make, is
there a way to avoid the voice command prompts?
Yes, it is called barging in. Simply press the
steering wheel button and say your first command,
then immediately after, press the
steering wheel
button again and say your second command.
Example – Press thesteering wheel button
and say “Settings”, then as soon as you hear the beep,
press the
steering wheel button again and say
“Pairing”.
108 BLUE&ME™ User’s Manual

•Can I have 2 phones both paired to theBLUE&ME™
system at the same time?
Yes, you can pair up to a total of 5 phones, but only
one can be linked at anytime. The most recently paired
mobile phone will be the primary phone.
•Why does theBLUE&ME™system say “phonebook
copy in progress” when I first try to make a call after
getting into the vehicle?
Depending on the size of your phonebook,
BLUE&ME™may take some time to download or
check for updates. So, if you try to immediately make
a phone call after getting into the vehicle, the
BLUE&ME™system may tell you to wait.
BLUE&ME™ Media Player – Quick Tips
•
How do I use theBLUE&ME™Media Player? There
are three methods:
Voice Recognition
Steering Wheel Buttons (located on the front and
rear of the steering wheel)
Using the controls on the device itself
•Why is the USB Port and AUX Port in the glove box?
To provide you more security for your personal
media devices. Even though your media device is in
the glove box you can still operate that device by use
of the Steering Wheel Buttons.
•My iPod/iPhone is not recognized by the Media
Player System, or is recognized, then lost.
110 BLUE&ME™ User’s Manual

BLUE&ME™ And The TomTom PND (Portable
Navigation Device) (If Equipped) – Quick Tips
•
How does the TomTom Portable Navigation Device
communicate with theBLUE&ME™system?
You use the same procedure as if you were pairing
a mobile phone to theBLUE&ME™system. Once
connected, you can control your PND by using the
BLUE&ME™system Voice Commands and steering
wheel buttons. Also, theBLUE&ME™system can be
controlled from the Tom Tom PND.
•How do I mount my TomTom PND on the dash?
Insert the TomTom PND in the cradle holder then
insert the cradle holder into the spring loaded slot on
the dash.
112 BLUE&ME™ User’s Manual