adding oil FIAT 500 ABARTH 2016 2.G Owners Manual

MAINTAINING YOUR VEHICLE
CONTENTS
ENGINE COMPARTMENT — 1.4L TURBO . . . .343
 ONBOARD DIAGNOSTIC SYSTEM — OBD II . .344
▫ Onboard Diagnostic System (OBD II)
Cybersecurity ....................... .344
 EMISSIONS INSPECTION AND MAINTENANCE
PROGRAMS ......................... .345
 REPLACEMENT PARTS ..................347
 DEALER SERVICE ..................... .347
 MAINTENANCE PROCEDURES ...........347
▫ Engine Oil ......................... .348▫
Engine Oil Filter ..................... .350
▫ Engine Air Cleaner Filter ................351
▫ Maintenance-Free Battery ...............352
▫ Air Conditioner Maintenance .............353
▫ Body Lubrication .....................357
▫ Windshield Wiper Blades ...............358
▫ Adding Washer Fluid ..................360
▫ Exhaust System ..................... .360
▫ Cooling System ..................... .363
▫ Brake System ....................... .368
7

Checking the oil while the vehicle is on level ground, and
approximately five minutes after a fully warmed engine
is shut off, will improve the accuracy of the oil level
readings. Maintain the oil level between the range mark-
ings on the dipstick. The safe range is indicated by a
crosshatch zone. Adding 1 quart (0.9 Liters) of oil when
the reading is at the low end of the indicated range will
result in the oil level at the full end of the indicator range.
CAUTION!
Do not overfill the engine with oil. Overfilling the
engine with oil will cause oil aeration, which can
lead to loss of oil pressure and an increase in oil
temperature. This loss of oil pressure and increased
oil temperature could damage your engine.
Change Engine Oil
The oil change indicator system will remind you that it is
time to take your vehicle in for scheduled maintenance.
Refer to the “Maintenance Schedule” for further informa-
tion.
NOTE:Under no circumstances should oil change inter-
vals exceed 10,000 miles (16,000 km), twelve months or
350 hours of engine run time, whichever comes first. The
350 hours of engine run or idle time is generally only a
concern for fleet customers.
Engine Oil Selection
For best performance and maximum protection for tur-
bocharged engines under all types of operating condi-
tions, the manufacturer recommends synthetic engine
oils that are API Certified and meet the requirements of
FCA Material Standard MS-12991.
7
MAINTAINING YOUR VEHICLE 349

Exterior Lights........................ .79, 388
Filters Air Cleaner .......................... .351
Air Conditioning ...................... .355
Engine Oil ........................... .350
Engine Oil Disposal .....................350
Flashers Turn Signal ........................ .79, 174
Flash-To-Pass ........................... .101
Flooded Engine Starting ....................231
Fluid, Brake ............................ .396
Fluid Capacities ......................... .393
Fluid Leaks ..............................79
Fluid Level Checks Automatic Transmission ..................372
Fluids ................................ .394
Fluids, Lubricants And Genuine Parts ...........394
Fog Lights .......................... .105, 168Freeing A Stuck Vehicle
.....................335
Fuel .................................. .297
Adding ............................. .302
Additives ............................ .299
Capacity ............................ .393
Clean Air ............................ .298
Ethanol ............................. .298
Filler Cap (Gas Cap) .....................302
Gasoline ............................. .297
Materials Added ....................... .299
Methanol ............................ .298
Octane Rating ......................... .297
Requirements ......................... .297
Specifications ......................... .394
Tank Capacity ......................... .393
Fueling ............................... .302
Fuses ................................. .381
Gas Cap (Fuel Filler Cap) ................302, 304
10
INDEX 419