engine coolant FIAT 500E 2013 2.G User Guide

FLUIDS AND CAPACITIES
SystemsU.S. Metric
Brake Master Cylinder
MOPAR® DOT 3, SAE J1703 should be used.If DOT 3,
SAE J1703 brake fluid is not available, then DOT 4 is accept-
able .Use only recommended brake fluids or equivalent .
Refrigerant
MOPAR® R134a
Compressor Lubricant
MOPAR® POE Oil or Equivalent meeting the require-
ments of Chrysler Material Standard MS-12727
Single-Speed Transmission
Castrol BOT 533 0.8 Quarts 750 ml
Power Electronics Cooling System 3.6 Quarts 3
.5 Liters
MOPAR® Antifreeze/Engine Coolant 10 Year/
150,000 Mile Formula or equivalent
Battery Thermal Management Cooling System 7.0 Quarts 6
.7 Liters
MOPAR® Antifreeze/Engine Coolant 10 Year/
150,000 Mile Formula or equivalent
CAUTION!
• Mixing of coolant (antifreeze) other than specified Organic Additive Technology
(OAT) coolant (antifreeze), may result in cooling system damage and may decrease
corrosion protection. Organic Additive Technology (OAT) coolant is different and
should not be mixed with Hybrid Organic Additive Technology (HOAT) coolant
(antifreeze). If a non-OAT coolant (antifreeze) is introduced into the cooling system
in an emergency, it should be replaced with the specified coolant (antifreeze) as soon
as possible .
• Do not use water alone or alcohol-based coolant (antifreeze) products .Do not use
additional rust inhibitors or antirust products, as they may not be compatible with
the radiator coolant and may plug the radiator .
• This vehicle has not been designed for use with propylene glycol-based coolant
(antifreeze). Use of propylene glycol-based coolant (antifreeze) is not recommended.
MAINTAINING YOUR VEHICLE
68