radio FIAT 500E 2014 2.G Owner's Guide

HAZARD WARNING FLASHERS
The Hazard Warning flasher switch is located on the
instrument panel below the radio.Press the switch to turn on the Hazard Warning
flashers. When the switch is activated, all direc-
tional turn signals will flash on and off to warn oncoming
traffic of an emergency. Press the switch a second time to
turn off the Hazard Warning flashers.
Do not use this emergency warning system when the
vehicle is in motion. Use it when your vehicle is disabled
and it is creating a safety hazard for other motorists.
If it is necessary to leave the vehicle to go for service, the
Hazard Warning flashers will continue to operate with
the ignition key removed and the vehicle locked.
NOTE: With extended use, the Hazard Warning flashers
may wear down your battery.
WHEEL AND TIRE TORQUE SPECIFICATIONS
Proper lug nut/bolt torque is very important to ensure
that the wheel is properly mounted to the vehicle. Any
time a wheel has been removed and reinstalled on the
vehicle the lug nuts/bolts should be torqued using a
properly calibrated torque wrench.
Torque Specifications
Lug Nut/Bolt Torque **Lug Nut/ Bolt SizeLug Nut/
Bolt Socket Size
66 Ft-Lbs (90 N·m)
Steel Wheels Only
75 Ft-Lbs (100 N·m) Aluminum Wheels Only M12 x 1.25 17 mm
**Use only Chrysler recommended lug nuts/bolts and
clean or remove any dirt or oil before tightening.
272 WHAT TO DO IN EMERGENCIES

WARNING!
•Take care to avoid the radiator cooling fan when-
ever the hood is raised. It can start anytime the
ignition switch is ON. You can be injured by
moving fan blades.
• Remove any metal jewelry such as rings, watch
bands and bracelets that could make an inadvertent
electrical contact. You could be seriously injured.
• Batteries contain sulfuric acid that can burn your
skin or eyes and generate hydrogen gas which is
flammable and explosive. Keep open flames or
sparks away from the battery.
1. Set the parking brake, place the transmission into PARK and turn the ignition to LOCK.
2. Turn off the heater, radio, and all unnecessary electri- cal accessories.
Battery Posts
1 — Positive (+) Post (Covered With Protective Cap)
2 — Negative (-) Post
6
WHAT TO DO IN EMERGENCIES 285

To minimize the possibility of scratching the lenses and
reducing light output, avoid wiping with a dry cloth. To
remove road dirt, wash with a mild soap solution fol-
lowed by rinsing.
Do not use abrasive cleaning components, solvents, steel
wool or other aggressive material to clean the lenses.
Glass Surfaces
All glass surfaces should be cleaned on a regular basis
with MOPAR® Glass Cleaner, or any commercial
household-type glass cleaner. Never use an abrasive type
cleaner. Use caution when cleaning the inside rear win-
dow equipped with electric defrosters or the right rear
quarter window equipped with the radio antenna. Do
not use scrapers or other sharp instrument that may
scratch the elements.When cleaning the rear view mirror, spray cleaner on the
towel or rag that you are using. Do not spray cleaner
directly on the mirror.
Instrument Panel Cover
The instrument panel cover has a low glare surface which
minimizes reflections on the windshield. Do not use
protectants or other products which may cause undesir-
able reflections. Use soap and warm water to restore the
low glare surface.
Instrument Panel Bezels
CAUTION!
When installing hanging air fresheners in your ve-
hicle, read the installation instructions carefully.
Some air fresheners will damage the finish of
painted or decorated parts if allowed to directly
contact any surface.
7
MAINTAINING YOUR VEHICLE 317

CavityVehicle
Fuse
Number Mini
Fuse Description
5 F36 10 Amp RedDiagnostic Socket,
Car Radio, Climate
Control System,
Tire Pressure Moni-
tor, TCU and CTM
6 F43 20 Amp YellowBi-Directional
Washer
7 F48 20 Amp YellowPassenger Power
Window
8 F13 7.5 Amp
Brown Left Low Beam
9 F50 7.5 Amp
Brown AirbagCavity
Vehicle
Fuse
Number Mini
Fuse Description
10 F51 5 Amp Ta nCar Radio Switch,
Climate Control
System, Stop Light,
Exterior Mirrors,
Sunroof Switch,
GPS (option) and
CTM
11 F37 5 Amp Ta nStop Light Switch,
Instrument Panel
Node
12 F49 5 Amp Ta nExterior Mirror,
GPS, Electric Mir-
ror, Parking Sensor,
Sunroof Switch
7
MAINTAINING YOUR VEHICLE 321

Automatic Dimming.....................105
Electric Powered ....................... .106
Heated .............................. .107
Modifications/Alterations, Vehicle ...............8
Multi-Function Control Lever .................125
Occupant Restraints ........................46
Occupant Restraints (Sedan) ..................67
Operator Manual (Owner’s Manual) .............5
Owner’s Manual (Operator Manual) .............5
Paint Care ............................. .312
Parking Brake ........................... .224
Passing Light ........................... .126
Pets ....................................95
Placard, Tire and Loading Information ..........241
Power Door Locks ............................42
Mirrors ............................. .106Outlet (Auxiliary Electrical Outlet)
...........147
Steering ............................. .223
Sunroof ............................. .144
Windows ..............................44
Pregnant Women and Seat Belts ................54
Pretensioners Seat Belts ..............................55
Radial Ply Tires ......................... .248
Radio Operation ......................... .171
Radio Reception ......................... .171
Radio (Sound Systems) .....................171
Rear Liftgate (Sedan) .......................45
Rear Window Features .....................152
Recorder, Event Data .......................75
Recreational Towing ...................... .266
Release, Hood ........................... .123
Reminder, Seat Belt .........................48
10
INDEX 355

Remote Keyless Entry (RKE)FCC General Information ..................40
Remote Sound System (Radio) Controls .........198
Replacement Bulbs ....................... .327
Replacement Keys .........................35
Replacement Parts ........................ .296
Replacement Tires ........................ .255
Reporting Safety Defects ....................344
Restraints, Child ...........................76
Restraints, Occupant ........................46
Rotation, Tires .......................... .258
Safety Checks Inside Vehicle ..................96
Safety Checks Outside Vehicle .................99
Safety Defects, Reporting ....................344
Safety Information, Tire .....................234
Safety Tips ...............................96
Schedule, Maintenance .....................334 Seat Belt
BeltAlert® .............................47
Disengage The Automatic Locking Mode .......57
Energy Management Feature ................55
Engage The Automatic Locking Mode .........57
Lap/Shoulder Belts .......................49
Lap/Shoulder Belt Untwisting ...............53
Pregnant Women ........................54
Seat Belt Extender .......................54
Seat Belt Pretensioner .....................55
Seat Belt Reminder .......................48
Seat Belt System .........................46
Seat Belt Maintenance ..................... .318
Seat Belt Reminder .........................48
Seat Belts ................................47
And Pregnant Women .....................54
Child Restraint ..........................76
Extender ..............................54
Front Seat .............................47
356 INDEX

INSTALLATION OF RADIO TRANSMITTING
EQUIPMENT
Special design considerations are incorporated into this vehicle’s
electronic system to provide immunity to radio frequency signals.
Mobile two-way radios and telephone equipment must be
installed properly by trained personnel. The following must be
observed during installation.
The positive power connection should be made directly to the
battery and fused as close to the battery as possible. The negative
power connection should be made to body sheet metal adjacent
to the negative battery connection. This connection should not
be fused.
Antennas for two-way radios should be mounted on the roof or
the rear area of the vehicle. Care should be used in mounting
antennas with magnet bases. Magnets may affect the accuracy or
operation of the compass on vehicles so equipped.The antenna cable should be as short as practical and routed
away from the vehicle wiring when possible. Use only fully
shielded coaxial cable.
Carefully match the antenna and cable to the radio to ensure a
low Standing Wave Ratio (SWR).
Mobile radio equipment with output power greater than normal
may require special precautions.
All installations should be checked for possible interference
between the communications equipment and the vehicle’s elec-
tronic systems.