fuse FIAT 500E 2015 2.G User Guide

CavityMaxi
FuseMini Fuse Description
F07 40 Amp
Orange
–Regen Brake Mod-
ule
F08 40 Amp
Orange
–HVAC
F09 – 5 Amp
Ta n
Air Electric Heater
Charge Indicator
F10 – 10 Amp
Red
Horn
F11 – 10 Amp
Red
Electronic Vehicle
Control Unit
(EVCU)
F14 – 5 Amp
Ta n
High Beam
(Shutter)
F15 – 15 Amp
Blue
Cigar Lighter
CavityMaxi
FuseMini Fuse Description
F16 – 10 Amp
Red
Humidity Sensor
VPAM
AC Compressor
F18 – 5 Amp
Ta n
Electronic Vehicle
Control Unit
(EVCU)
F19 – 10 Amp
Red
HVAC
F20 – 15 Amp
Blue
Heated Seats – If
Equipped
F23 – 25 Amp
Clear
Anti-Lock Brake
Valves
F24 – 7.5 Amp
Brown
EPS
YAW Sensor
326 MAINTAINING YOUR VEHICLE

CavityMaxi
FuseMini Fuse Description
F30 – 15 Amp
Blue
Fog Lamps
F81 30 Amp
Green
– Electronic Shifter
(ESM)
F82 30 Amp
Green
– Sunroof
F84 – 25 Amp
Clear
Regen Brake Mod-
ule
F85 30 Amp
Green
– Rear Window
Heater
F87 – 5 Amp
Ta n
Electronic Shifter
(ESM)
Power Distribution Center (PDC) #2
The Power Distribution Center #2 is located next to the
battery in the underhood compartment. To access the
fuses, pull the release tabs and remove the cover.
PDC #2
7
MAINTAINING YOUR VEHICLE 327

Cav-
ity
Maxi
Fuse
Mini
Fuse
Description
FPT9 – 15 Amp
Blue
Battery Pack Control
Module (BPCM)
Power Inverter
Module (PIM)
FPT13 – 10 Amp
Red
EAC
(AC Compressor)
On Board Charging
Module (OBCM)
FPT16 – 5 Amp
Ta n
Intelligent Battery
Sensor (IBS)
FPT17 – 10 Amp
Red
EAC
(AC Compressor)
Radiator Fan
Cav-
ity
Maxi
Fuse
Mini
Fuse
Description
FPT20 – 10 Amp
Red
Electronic Vehicle
Control Unit (EVCU)
CavityCartridge Fuse Description
FPT325 Amp White Battery Coolant
Pump
FPT520 Amp Lt. Blue Inverter Coolant
Pump
328 MAINTAINING YOUR VEHICLE

Fluids, Lubricants and Genuine Parts...........334
Fog Lights..............................127
Freeing A Stuck Vehicle.....................291
Fuses..................................321
Gear Ranges.............................218
General Information........................36
General Maintenance.......................299
Glass Cleaning...........................319
Hazard
Driving Through Flowing, Rising, or Shallow
Standing Water.........................223
Headlights..............................122
Cleaning.............................318
High Beam............................158
Passing..............................123
Switch...............................123
Heated Mirrors...........................105
Heated Seats.............................117
Holder, Cup.............................148
Hood Release............................120
Ignition.................................32
Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Ignition Key Removal.......................32
Immobilizer (Sentry Key)....................34
Information Center, Vehicle..................166
Instrument Cluster........................158
Instrument Panel and Controls................155
Instrument Panel Cover.....................319
Instrument Panel Lens Cleaning...............320
Interior Appearance Care....................318
Interior Lighting..........................125
Key-In Reminder..........................34
Key, Replacement..........................35
Keys...................................32
10
INDEX 357

INSTALLATION OF RADIO TRANSMITTINGEQUIPMENTSpecial design considerations are incorporated into thisvehicle’s electronic system to provide immunity to radiofrequency signals. Mobile two-way radios and telephoneequipment must be installed properly by trained person-nel. The following must be observed during installation.The positive power connection should be made directlyto the battery and fused as close to the battery as possible.The negative power connection should be made to bodysheet metal adjacent to the negative battery connection.This connection should not be fused.Antennas for two-way radios should be mounted on theroof or the rear area of the vehicle. Care should be usedin mounting antennas with magnet bases. Magnets mayaffect the accuracy or operation of the compass onvehicles so equipped.
The antenna cable should be as short as practical androuted away from the vehicle wiring when possible. Useonly fully shielded coaxial cable.Carefully match the antenna and cable to the radio toensure a low Standing Wave Ratio (SWR).Mobile radio equipment with output power greater thannormal may require special precautions.All installations should be checked for possible interfer-ence between the communications equipment and thevehicle’s electronic systems.