battery FIAT 500L 2016 2.G Owner's Guide

Automatic Transmission...........270, 283, 409, 411
Adding Fluid ...................... .410, 411
Autostick ............................ .289
Fluid And Filter Changes ..................411
Fluid Change ..........................411
Fluid Level Check ...................... .410
Fluid Type ........................... .437
Gear Ranges .......................... .284
Special Additives ...................... .410
Autostick .............................. .289
Auto Up Power Windows ....................27
Battery ................................ .388
Jump Starting ......................... .365
Belts, Seat ...............................83
Body Mechanism Lubrication .................392
B-Pillar Location ......................... .313
Brake Assist System ...................... .298
Brake Fluid ............................ .437Brake, Parking
.......................... .294
Brakes ................................ .405
Brake System ........................ .296, 405
Anti-Lock (ABS) ....................... .297
Master Cylinder ....................... .405
Parking ............................. .294
Warning Light ........................ .166
Brake/Transmission Interlock .................272
Bulb Replacement ..................... .428, 430
Bulbs, Light .......................... .85, 428
Camera, Rear ........................... .131
Capacities, Antifreeze (Engine Coolant) ..........434
Capacities, Fluid ......................... .434
Caps, Filler Fuel ................................ .378
Oil (Engine) .......................... .386
Carbon Monoxide Warning ................82, 342
Car Washes ............................ .412
10
INDEX 459

LocksChild Protection .........................25
Door .................................22
Lubrication, Body ........................ .392
Lug Nuts .............................. .350
Maintenance Free Battery ....................388
Maintenance, General ..................... .384
Maintenance Procedures ....................384
Maintenance Schedule ..................... .440
Malfunction Indicator Light (Check Engine) .......178
Manual, Service ......................... .453
Manual Transmission ...................268, 407
Fluid Level Check ...................... .407
Frequency Of Fluid Change ................407
Lubricant Selection ...................407, 437
Master Cylinder (Brakes) ....................405
Methanol .............................. .339
Mirrors .................................90 Automatic Dimming
......................91
Electric Powered .........................92
Electric Remote .........................92
Heated ...............................93
Rearview ..............................90
Modifications/Alterations, Vehicle ...............8
Monitor, Tire Pressure System ................333
MTBE/ETBE ........................... .339
Multi-Function Control Lever .................111
New Vehicle Break-In Period ..................80
Occupant Restraints ........................31
Octane Rating, Gasoline (Fuel) ................338
Oil Change Indicator ...................... .190
Oil Change Indicator, Reset ..................190
Oil, Engine ...................... .385, 434, 435
Capacity ............................ .434
Change Interval ....................... .386
466 INDEX

INSTALLATION OF RADIO TRANSMITTING
EQUIPMENT
Special design considerations are incorporated into this
vehicle’s electronic system to provide immunity to radio
frequency signals. Mobile two-way radios and telephone
equipment must be installed properly by trained person-
nel. The following must be observed during installation.
The positive power connection should be made directly
to the battery and fused as close to the battery as possible.
The negative power connection should be made to body
sheet metal adjacent to the negative battery connection.
This connection should not be fused.
Antennas for two-way radios should be mounted on the
roof or the rear area of the vehicle. Care should be used
in mounting antennas with magnet bases. Magnets may
affect the accuracy or operation of the compass on
vehicles so equipped.The antenna cable should be as short as practical and
routed away from the vehicle wiring when possible. Use
only fully shielded coaxial cable.
Carefully match the antenna and cable to the radio to
ensure a low Standing Wave Ratio (SWR).
Mobile radio equipment with output power greater than
normal may require special precautions.
All installations should be checked for possible interfer-
ence between the communications equipment and the
vehicle’s electronic systems.