display FIAT BRAVO 2015 2.G User Guide

Activation/Trip B data (Activating Trip B)
This function can be used to activate (On) or
deactivate (Off ) the Trip B display (partial trip). For
further information see “Trip computer” in this
section.
Proceed as follows to switch the function on/off:
❒briefly press the MODE button: On or Off flashes
on the display (according to the previous setting);
❒ press
or
to make your choice;
❒ briefly press the MODE button to return to the
menu screen or hold the button down to return
to the standard screen without storing.
Time adjustment (Clock adjustment)
This function enables to set the clock through two
submenus: “Time” and “Format”.
To carry out the adjustment, proceed as follows:
❒ briefly press the MODE button and two
submenus, "Time" and "Format", are displayed;
❒ press theor
button to switch between the
two submenus;
❒ once you have selected the submenu to be
changed, press the MODE button briefly;
❒ when you select “Time”, briefly pressing the
MODE button makes the hours flash on the
display;
❒ press the
or
button to make the adjustment; ❒
briefly press the MODE button: “minutes” starts
flashing on the display;
❒ press the button
or
for setting.
IMPORTANT The setting will increase or decrease
by one unit each time the button
or
is pressed.
Hold down the button to increase/decrease the
setting rapidly and automatically. Complete the
adjustment with single presses of the button when
you approach the desired value.
If you enter the "Format" submenu, pressing the
MODE button briefly makes the display format flash
on the display;
❒ Press button
or
to select “24h” or “12h”.
❒ when you have made the adjustment, briefly press
the MODE button to go back to the submenu
screen or hold the button down to go back to the
main menu screen without storing.
❒ hold down the MODE button again to return to
the standard screen or to the main menu
according to where you are in the menu.
When you have made the adjustment, briefly press
the MODE button to go back to the submenu screen
or hold the button down to go back to the main
menu screen without storing.
22GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND DRIVING
WARNING LIGHTS AND MESSAGES
IN AN EMERGENCY SERVICING ANDMAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

Set date (Setting the date)
Using this function it is possible to update the date
(day - month - year).
Proceed as follows to start the update:
❒briefly press the SET button: the “year” will flash
on the display;
❒ press the
or
button to make the adjustment;
❒ briefly press the SET button: the “month” will flash
on the display;
❒ press the
or
button to make the adjustment;
❒ briefly press the SET button: the “day” will flash on
the display;
❒ press the buttonor
for setting.
IMPORTANT The setting will increase or decrease
by one unit each time the button
or
is pressed.
Hold down the button to increase/decrease the
setting rapidly and automatically. Complete the
adjustment with single presses of the button when
you approach the desired value.
Briefly press the MODE button to return to the
menu screen or hold the button down to return to
the standard screen without storing. First page (display of information on the main
screen)
(for versions/markets, where provided)
This function allows you to choose the information
you would like to display on the main screen.
You can choose to display the date or the
turbocharger boost pressure.
To make your choice, proceed as follows:
❒
briefly press the MODE button: "First page" will
appear on the display;
❒ briefly press the MODE button again to display the
"Date" and "Engine info" options;
❒ press
or
to select the information you wish to
see on the main page of the display;
❒ press the MODE button briefly to return to the
menu screen or hold the button down to return
to the standard screen without storing.
When the key is turned to MAR-ON and the initial
check stage is over, the display will show the
information set previously via the “First page” menu
function.
23GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

See radio (Audio information display)
With this function the display shows information
about the sound system.
❒Radio: selected radio station frequency or RDS
message, automatic tuning activation or
AutoSTore;
❒ Audio CD, MP3 CDs: track number;
❒ CD Changer: CD number and track number;
To show the radio information on the display (On)
or clear it (Off ), proceed as follows:
❒ briefly press the MODE button, the display will
show "On" or "Off" flashing depending on the
previous setting;
❒ press
or
to make your choice;
❒ briefly press the MODE button to return to the
menu screen or hold the button down to return
to the standard screen without storing.
Autoclose (Automatic central locking with
the car in motion)
When activated (On), this function locks the doors
automatically when the vehicle speed exceeds 20
km/h.
Proceed as follows to activate or deactivate this
function:
❒ briefly press the MODE button to display a
submenu; ❒
briefly press the MODE button: "On" or "Off"
flashes on the display according to the previous
setting;
❒ press
or
to make your choice;
❒ press the MODE button briefly to return to the
submenu screen or hold the button down to
return to the main menu screen without storing;
❒ hold down the MODE button again to return to
the standard screen or to the main menu
according to where you are in the menu.
Unit of measurement (Setting the unit of
measurement)
With this function it is possible to set the units
through three submenus: "Distances",
"Consumption" and "Temperature". To set the
desired unit, proceed as follows:
❒ briefly press the MODE button to display the
three submenus;
❒ press buttonor
to navigate through the three
submenus;
❒ once you have selected the submenu to be
changed, press the MODE button briefly;
❒ when you select the “Distances” submenu, briefly
pressing the MODE button makes the display
show “km” or “mi” depending on the previous
setting;
24GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND DRIVING
WARNING LIGHTS AND MESSAGES
IN AN EMERGENCY SERVICING ANDMAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

❒press
or
to make your choice;
❒ when you select the “Consumption” submenu,
pressing the MODE button makes "km/l", "l/100
km" or "mpg" appear on the display depending on
the previous setting;
If the set distance unit is "km", the fuel consumption
unit will be displayed in km/l or l/100 km.
If the set distance unit is “mi” the fuel consumption
unit will be displayed in “mpg”.
❒ press
or
to make your choice;
❒ when you enter the “Temperature” submenu,
briefly pressing the MODE button makes "°C" or
"°F" appear on the display depending on the
previous setting;
❒ press
or
to make your choice;
When you have made the adjustment, briefly press
the MODE button to go back to the submenu screen
or hold the button down to go back to the main
menu screen without storing.
Hold down the MODE button again to return to the
standard screen or to the main menu according to
where you are in the menu. Language (Language selection)
Display messages can be shown in different
languages: Italian, German, English, Spanish, French,
Portuguese and Dutch.
To set the desired language, proceed as follows:
❒
briefly press the MODE button: the previously set
language starts flashing on the display;
❒ press
or
to make your choice;
❒ briefly press the MODE button to return to the
menu screen or hold the button down to return
to the standard screen without storing.
Warnings volume (Adjusting the failure/
warning acoustic signal volume)
With this function the volume of the buzzer which
accompanies the display of any failure/warning can be
adjusted to 8 levels.
To set the desired volume, proceed as follows:
❒ press the MODE button briefly, making the display
flash the previously set volume "level";
❒ press theor
button to make the adjustment;
❒ briefly press the MODE button to return to the
menu screen or hold the button down to return
to the standard screen without storing.
25GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

Button volume (adjusting the button volume) This function allows the volume of the acoustic signal that accompanies MODE,
and
button
presses to 8 levels To set the desired volume, proceed as follows:❒
press the MODE button briefly, making the display flash the previously set volume "level";
❒
press the
or
button to make the adjustment;
❒
press the MODE button briefly to return to themenu screen or hold the button down to returnto the standard screen without storing.
Seat belt buzzer (Buzzer activation for SBRindication) This function can be displayed only after a Fiat Dealership has deactivated the SBR system (see the“Safety” section in the “SBR system” paragraph). To reactivate this function, proceed as follows:❒
briefly press the MODE button, the display shows "Off" flashing. Press the
or
button and "On"
will appear;
❒
briefly press the MODE button to return to thesubmenu screen or hold the button down toreturn to the main menu screen without storing.
Service (Scheduled servicing)
26GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTSAND MESSAGESIN AN EMERGENCYSERVICING ANDMAINTENANCETECHNICAL
SPECIFICATIONS
INDEX
This function allows you to display the information about km/mileage intervals or, for versions/markets,where provided, time intervals for car servicing. To consult this information, proceed as follows:
❒
briefly press the MODE button: the display shows when servicing is due in km/mi or days (whereprovided) or mi or days (where provided)according to the previous setting (see paragraph"Units of measurement");
❒
briefly press the MODE button to go back to the menu screen or hold the button down to go backto the standard screen.
Note
The “Scheduled Servicing Plan” includes car
maintenance at fixed intervals (refer to the"Maintenance and care" chapter). This is displayedautomatically, with ignition key at MAR-ON, 2000km (or equivalent value in miles) before servicing or,where provided, 30 days before servicing. It is alsodisplayed each time the key is turned to MAR-ON or,for versions/markets, where provided, every 200 km(or equivalent value in miles). Below this thresholdservicing indications are more frequent. The displaywill be in km or miles according to the unit ofmeasurement set. When the following scheduledservicing is approaching, the word “Service” willappear on the display, followed by the number ofkilometres/miles or days (where provided) left, whenthe key is turned to MAR-ON. Go to a FiatDealership, where the "Scheduled Servicing Plan"operations will be performed and the message willbe reset. When the service interval is reached and for about 1000 km/600 mi or 30 days, a service due message isdisplayed.

Airbag/Passenger bag This function is used to activate/deactivate the passenger side airbag. Proceed as follows:❒
press the MODE button and, after the message "Bag pass: Off" (to deactivate) or "Bag pass: On"(to activate) is displayed by pressing the
and
buttons, press the MODE button again;
❒
a confirmation request message will appear on thedisplay;
❒
by pressing the
or
buttons, select ("Yes") (to
confirm activation/deactivation) or ("No") (tocancel);
❒
press the MODE button briefly and a messageconfirming the selection will be displayed, then youwill return to the menu screen, or hold thebutton down to return to the standard screenwithout storing.
Exit menu The last function closing the cycle of settings listed in the menu screen. Press the MODE button briefly to return to the standard screen without storing. Press the
button to go back to the first menu
option ("Speed Beep").
27GETTING TO KNOW YOUR CAR SAFETYSTARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCYSERVICING AND MAINTENANCE TECHNICAL SPECIFICATIONS INDEX

TRIP COMPUTERGeneral information
The Trip computer is used to display information on
car operation when the key is turned to MAR-ON.
Two separate trips, called “Trip A” and “Trip B”,
are provided to monitor the entire mission (journey)
in a reciprocally independent manner.
Both functions can be reset (reset - start of a new
journey).
“Trip A” is used to display the figures relating to:
❒Range
❒ Distance covered
❒ Average consumption
❒ Instantaneous consumption
❒ Average speed
❒ Trip time (driving time).
“Trip B” is used to display the figures relating to:
❒ Distance travelled B
❒ Average consumption B
❒ Average speed B
❒ Trip time B (driving time).
Note The “Trip B” function may be disabled (see
“Activating Trip B”). The “Range” and “Instant
consumption" parameters cannot be reset. Values displayed
Range
This indicates the approximate distance which can be
travelled with the amount of fuel present in the
tank. “- - - -” will appear on the display in the
following cases:
❒
range value lower than 50 km (or 30 mi)
❒ car parked with engine running for an extended
period.
IMPORTANT The range value variation can be
affected by several factors: driving style, type of route
(motorway, urban, mountain roads, etc.), conditions
of use (load, tyre pressures, etc.). Trip planning
must therefore take the above into account.
Distance covered
Shows the distance covered since the start of the
new journey.
Average consumption
Shows the approximate average fuel consumption
since the start of the new journey.
Instantaneous consumption
This indicates the fuel consumption. The value is
constantly updated. The display will show “----”if
the car is parked with the engine running.
28GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND DRIVING
WARNING LIGHTS AND MESSAGES
IN AN EMERGENCY SERVICING ANDMAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

Average speed
This shows the average car speed as a function of the
overall time elapsed since the start of the new
journey.
Trip time
The time elapsed since the start of a new journey.
TRIP BUTTON
The TRIP button is located on the right hand
stalkfig. 16. With the ignition key turned to
MAR-ON, this button allows you to view the
previously described parameters and also zero them
to begin a new mission:
❒short press: display various values;
❒ long press: reset values and start a new journey. New mission
This begins after a reset:
❒
“manual” resetting by the user, by pressing the
relevant button;
❒ automatically when the distance travelled reaches
99,999.9 km or when the journey time reaches
99.59 (99 hours and 59 minutes);
❒ after disconnection/reconnection of the battery.
IMPORTANT The reset operation when “Trip A” or
“Trip B” details are being displayed only resets the
values associated with the function displayed.
Start of journey procedure
With ignition key at MAR, press and hold down the
TRIP button for more than 2 seconds to reset.
Exiting the Trip Function
You can automatically exit the TRIP function once all
the values have been displayed or by holding the
MODE button down for more than 1 second.
fig. 16
F0Q0647
29GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

DESCRIPTION The car is equipped with a dual zone climate control system which allows you to adjust the airtemperature on the driver's and the passenger's sideseparately. The system has an AQS function (Air Quality System)
recirculation when the outside air is polluted (e.g. intraffic queues and tunnels). CONTROLSA
AUTO function activation button (automatic operation) and driver side temperature adjustmentknob
Bair distribution selection buttonC
climate control system information display
D
fan speed increase/decrease
EMONO function activation button (settemperature alignment) and passenger sidetemperature adjustment knobFclimate control system on/off buttonG
heated rear window on/off button
H
MAX-DEF function activation button (rapiddefrosting/demisting of front windows)
Iinternal air temperature sensorLinternal air recirculation and AQS function on/offbuttonM
climate control system compressor on/off button
SWITCHING ON THE CLIMATE CONTROLSYSTEM The system can be activated by pressing any of the buttons; it is, however, advisable to set the desiredtemperatures on the display, then press the AUTO button.The climate control system allows you to customise the temperatures requested (driver side andpassenger side) with a maximum difference of 7°C. The climate control system compressor works only with the engine running and an outsidetemperature of above 4°C. AUTOMATIC OPERATION OF THE CLIMATE CONTROL SYSTEM (AUTOfunction) Press the AUTO button; the system will automatically adjust: ❒
the amount of air introduced into the passenger compartment;
❒
the distribution of the air in the passengercompartment;
cancelling all previous manual adjustments. During climate control system automatic operation, the words FULL AUTO appear on the display.
47GETTING TOKNOW YOUR CAR SAFETYSTARTING AND DRIVING WARNING LIGHTS AND MESSAGES IN AN EMERGENCYSERVICING AND MAINTENANCE TECHNICAL SPECIFICATIONS INDEX
(for versions/markets, where provided)which automatically activates internal air(for versions/markets, where provided)

During automatic operation it is still possible to
adjust the temperatures set and carry out the
following operations manually:
❒fan speed adjustment;
❒ air distribution selection;
❒ internal air recirculation and AQS function
activation/deactivation;
❒ climate control system compressor activation.
WARNING
It is advisable not to use the internal air
recirculation function when the outside
temperature is low, because the windows could
mist rapidly.
FAN SPEED ADJUSTMENT
Press button
to increase/decrease the fan speed.
The 12 possible speeds are indicated by bars lighting
up on the display:
❒ maximum fan speed = all bars lit
❒ minimum fan speed = one bar lit.
The fan can be disabled (no bars lit) only if the
climate control system compressor has been
switched off by pressing button
.
To restore automatic fan speed control after a
manual adjustment, press the AUTO button. RAPID FRONT WINDOW
DEMISTING/DEFROSTING
(MAX-DEF function)
Press button to automatically activate the timed
operation of all the functions required to rapidly
demist/defrost the windscreen and front side
windows.
The functions are:
❒
climate control system compressor activation
(with an outside temperature of above 4°C);
❒ switching off, if previously on, of the internal air
recirculation (LED on button
off );
❒ activation of heated rear window (LED on button
on) and door mirror heater coils;
❒ setting maximum air temperature;
❒ activation of air flow.
HEATED REAR WINDOW AND DOOR
MIRRORS DEMISTING/DEFROSTING
Press button
to activate: when this function is
activated, the button LED switches on.
This function is timed and will deactivate
automatically after 20 minutes. Press the button
again to switch the function off in advance.
IMPORTANT Do not apply stickers on the inside of
the rear window over the heating filaments to avoid
damage.
48GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND DRIVING
WARNING LIGHTS AND MESSAGES
IN AN EMERGENCY SERVICING ANDMAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX