2.3 jtd FIAT DUCATO 244 2005 3.G User Guide

207TECHNICAL SPECIFICATIONS
Version MAXI
Chassis cab long wheelbase Camping Car without EGR
Truck long wheelbase without EGR
Chassis cab with load bed long wheelbase without EGR
Chassis cab with load bed long wheelbase Camping Car without EGR
Chassis cowl long wheelbase without EGR
Chassis cowl long wheelbase Camping Car without EGR
Chassis cab 4050 wheelbase without EGR
Chassis cab 4050 wheelbase Camping Car without EGR
Truck 4050 wheelbase without EGR
Chassis cowl 4050 wheelbase without EGR
Chassis cowl 4050 wheelbase Camping Car without EGR
Chassis cab medium wheelbase crew cab without EGR
Chassis cab medium wheelbase crew cab Camping Car without EGR
Chassis cab 4050 wheelbase crew cab without EGR
Chassis cab 4050 wheelbase crew cab without EGR
Truck 4050 wheelbase without EGR
Truck 4050 wheelbase crew cab without EGR
Truck medium wheelbase crew cab without EGR
Chassis cab long wheelbase crew cab without EGR
Chassis cab long wheelbase crew cab Camping Car without EGR
Truck long wheelbase crew cab without EGR
Minibus long wheelbase without EGR
School bus (primary school) long wheelbase without EGR
School bus (secondary school) long wheelbase without EGR
Van short wheelbase without EGR
Van short wheelbase without EGR
Van medium wheelbase without EGR
Van high sided medium wheelbase without EGR
Van high sided medium wheelbase without EGR
Van high sided long wheelbase without EGR
Van high sided long wheelbase without EGREngine
2.3 JTD
2.3 JTD
2.3 JTD
2.3 JTD
2.3 JTD
2.3 JTD
2.3 JTD
2.3 JTD
2.3 JTD
2.3 JTD
2.3 JTD
2.3 JTD
2.3 JTD
2.3 JTD
2.3 JTD
2.3 JTD
2.3 JTD
2.3 JTD
2.3 JTD
2.3 JTD
2.3 JTD
2.3 JTD
2.3 JTD
2.3 JTD
2.8 JTD
2.8 JTD
2.8 JTD
2.8 JTD
2.8 JTD
2.8 JTD
2.8 JTDEngine
code
F1AE0481C
F1AE0481C
F1AE0481C
F1AE0481C
F1AE0481C
F1AE0481C
F1AE0481C
F1AE0481C
F1AE0481C
F1AE0481C
F1AE0481C
F1AE0481C
F1AE0481C
F1AE0481C
F1AE0481C
F1AE0481C
F1AE0481C
F1AE0481C
F1AE0481C
F1AE0481C
F1AE0481C
F1AE0481C
F1AE0481C
F1AE0481C
8140.43S
8140.43S
8140.43S
8140.43S
8140.43S
8140.43S
8140.43SBodywork
version
244CSMAC AYC
244CSMDC AY
244CSMCC AY
244CSMCC AYC
244CSMBC AY
244CSMBC AYC
244CSMAG AY
244CSMAG AYC
244CSMDG AY
244CSMBG AY
244CSMBG AYC
244CSMHB AY
244CSMHB AYC
244CSMHG AY
244CSMHG AYC
244CSMDG AY
244CSMGG AY
244CSMGB AY
244CSMHC AY
244CSMHC AYC
244CSMGC AY
244CSMMC AY
244CSMEC AY
244CSMLC AY
244CPMFA AY
244CPMFA BY
244CPMFB AY
244CPMNB AY
244CPMNB BY
244CPMNC AY
244CPMNC BY

214TECHNICAL SPECIFICATIONS
ENGINE
GENERAL FEATURES
Engine code
Cycle
Number and layout of cylinders
Diameter x stroke mm
Total capacity cm3
Compression ratio
kW
Maximum power output EEC HP
corresponding ratio rpm
Nm
Maximum torque EEC kgm
corresponding ratio rpm
Spark plugs
Fuel
2.0
RFL
Otto
4 in line
86x86
1998
9.5 : 1
81
110
5700
168
17.1
3700
RC9YCC
RFC52LS
Unleaded
petrol
95 RON2.0 JTD
RHV
Diesel
4 in line
85x88
1997
17.6 : 1
62
84
4000
192
19.6
1900
–
Diesel for
motor vehicles
(EN590
specifications)2.3 JTD
F1AE0481C
Diesel
4 in line
88x94
2286
19 : 1
81
110
3600
270
27.6
1800
–
Diesel for
motor vehicles
(EN590
specifications)2.8 JTD
8140.43 S
Diesel
4 in line
94.4x100
2800
18 : 1
93.5
127
3600
300
30.6
1800
–
Diesel for
motor vehicles
(EN590
specifications)2.8 JTD
POWER
8140.43 N
Diesel
4 in line
94.4x100
2800
18 : 1
107
146
3600
310
31.6
1500
–
Diesel for
motor vehicles
(EN590
specifications)

215TECHNICAL SPECIFICATIONS
FUEL SUPPLY/IGNITION
Petrol version
Electronic Multipoint sequential
phased integrated electronic injection
and ignition; a single injection system
controls both functions. It processes
both the time the injection lasts (for
fuel metering) and the ignition advance
angle.FUEL SUPPLY
JTD/JTD POWER versions
UNIJET (Common Rail) electronic
control direct injection, turbosuper-
charger with WASTEGATE valve and
intercooler (2.3 JTD, 2.8 JTD and 2.8
JTD POWER versions).SPARK PLUGS
The cleanness and soundness of the
spark plugs are very important for
keeping the engine efficient and pol-
luting emissions down.
The appearance of the spark plug, if
examined by an expert eyes, is a good
way of pinpointing a problem even if it
has nothing to do with the ignition sys-
tem. Therefore, if the engine has prob-
lems, it is important to have the spark
plugs checked at a Fiat Dealership.
The spark plugs must be
changed at the times
specified in the
SERVICE
SCHEDULE
. Only use the type of
plugs indicated: if the heat ratio
is less than required or the life
specified is not guaranteed, prob-
lems can arise.
Modifications or repairs to
the fuel feed system that
are not carried out properly or do
not take the system’s technical
specifications into account can
cause malfunctions leading to the
risk of fire.
WARNING

226TECHNICAL SPECIFICATIONS
PERFORMANCE
Top speedsallowable after running in kph
Versions/engines 11-2.0 11-2.0 JTD 11-2.3 JTD 11-2.8 JTD 15-2.0 15-2.0 JTD
144 (*) 136 (*) 149 (*) 152 (*) 144 (*) 136 (*)
135 (**) 128 (**) 145 (**) 148 (**) 135 (**) 128 (**)
* All Van versions-According to the specific version
** All Truck versions
Versions/engines 15 15 15MAXIMAXI MAXI MAXI
2.3 JTD 2.8 JTD 2.8 JTD 2.0 2.3 JTD 2.8 JTD 2.8 JTD
POWER POWER
149 (*) 152 (*) 159 136 (*) 147 (*) 152 (*) 159
145 (**) 148 (**) 152 (❐)128 (**) 143 (**) 148 (**) 152 (❐)
* All Van versions-According to the specific version
** All Truck versions
(❐) If Camping Car tyres are fitted

227TECHNICAL SPECIFICATIONS
VAN WEIGHTS
Weights (kg)
Version 11 (*)
Kerb weight
(including fuel,
spare wheel, tools
and accessories):
Payload including
driver (1):
Maximum admitted
loads (2)
– front axle:
– rear axle:
– total:
Towable weight:
– trailer with brakes
– trailer without brakes
Maximum load on ball coupling
(trailer with brakes)
Maximum load on roof
(1) If special equipment is fitted (tow hitch, etc.), the unladen vehicle weight increases, thus reducing the specified payload.
(2) Loads not to be exceeded. The driver is responsible for arranging the loads so that they comply with these limits.
* The figures given refer to panelled and glazed vans with medium and short wheelbase, both high and low sided.2.0
1695 ÷ 1780
1120 ÷ 1170
1600
1600
2865 ÷ 2900
2000
750
80
1002.0 JTD
1755 ÷ 1840
1060 ÷ 1145
1600
1600
2900
1600
750
80
1002.3 JTD
1825 ÷ 1910
990 ÷ 1075
1600
1600
2900
2000
750
80
1002.8 JTD
1850 ÷ 1935
965 ÷ 1050
1600
1600
2900
2000
750
80
100

228TECHNICAL SPECIFICATIONS
Weights (kg)
Version 15 (*)
Kerb weight
(including fuel,
spare wheel, tools
and accessories):
Payload including driver (1):
Maximum admitted
loads (2)
– front axle:
– rear axle:
– total:
Towable weight:
– trailer with brakes
– trailer without brakes
Maximum load on ball coupling
(trailer with brakes)
Maximum load on roof
(1) If special equipment is fitted (tow hitch, etc.), the unladen vehicle weight increases, thus reducing the specified payload.
(2) Loads not to be exceeded. The driver is responsible for arranging the loads so that they comply with these limits.
* The figures given refer to panelled and glazed vans with long, medium and short wheelbase, both high and low sided.2.0
1695 ÷ 1865
1435 ÷ 1510
1750
1850
3245 ÷ 3300
2000
750
80
1002.0 JTD
1755 ÷ 1840
1435 ÷ 1505
1750
1850
3300
1600
750
80
100
2.3 JTD
1725 ÷ 1995
1305 ÷ 1475
1750
1850
3300
2000
750
80
100
2.8 JTD
2.8 JTD POWER
1850 ÷ 2020
1280 ÷ 1450
1750
1850
3300
2000
750
80
100

229TECHNICAL SPECIFICATIONS
Weights (kg)
Version MAXI (*)
Kerb weight
(including fuel,
spare wheel, tools
and accessories):
Payload including driver (1):
Maximum admitted
loads (2)
– front axle:
– rear axle (3):
– total:
Towable weight:
– trailer with brakes
– trailer without brakes
Maximum load on ball coupling
(trailer with brakes)
Maximum load on roof
(1) If special equipment is fitted (tow hitch, etc.), the unladen vehicle weight increases, thus reducing the specified payload.
(2) Loads not to be exceeded. The driver is responsible for arranging the loads so that they comply with these limits.
(3) See “Cold tyre inflation pressure”.
* The figures given refer to panelled and glazed vans with long and medium wheelbase, both high and low sided.2.0
1765 ÷ 1915
1585 ÷ 1735
1850
2120
3500
2000
750
80
1002.3 JTD
1895 ÷ 2045
1455 ÷ 1605
1850
2120
3500
2000
750
80
100
2.8 JTD
2.8 JTD POWER
1935 ÷ 2070
1430 ÷ 1565
1850
2120
3500
2000
750
80
100

230TECHNICAL SPECIFICATIONS
PANORAMA WEIGHTS
Weights (kg)
Short wheelbase version
Kerb weight
(including fuel,
spare wheel, tools
and accessories):
Payload including driver (1):
Maximum admitted
loads (2)
– front axle:
– rear axle:
– total:
Towable weight:
– trailer with brakes
– trailer without brakes
Maximum load on ball coupling
(trailer with brakes)
Maximum load on roof
(1) If special equipment is fitted (tow hitch, etc.), the unladen vehicle weight increases, thus reducing the specified payload.
(2) Loads not to be exceeded. The driver is responsible for arranging the loads so that they comply with these limits.2.0
1925
8P + 431 kg
1600
1600
2900
2000
750
80
1002.0 JTD
1985
8P + 371 kg
1600
1600
2900
1600
750
80
1002.3 JTD
2055
8P + 301 kg
1600
1600
2900
2000
750
80
1002.8 JTD
2080
8P + 276 kg
1600
1600
2900
2000
750
80
100

231TECHNICAL SPECIFICATIONS
Weights (kg)
Medium wheelbase version
GRAND VOLUME
Kerb weight
(including fuel,
spare wheel, tools
and accessories):
Payload including driver (1):
Maximum admitted
loads (2)
– front axle:
– rear axle:
– total:
Towable weight:
– trailer with brakes
– trailer without brakes
Maximum load on ball coupling
(trailer with brakes)
Maximum load on roof
(1) If special equipment is fitted (tow hitch, etc.), the unladen vehicle weight increases, thus reducing the specified payload.
(2) Loads not to be exceeded. The driver is responsible for arranging the loads so that they comply with these limits.2.3 JTD
2195
8P + 561 kg
1750
1850
3300
2000
750
80
100 2.0
2065
8P + 691 kg
1750
1850
3300
2000
750
80
1002.8 JTD
2220
8P + 536 kg
1750
1850
3300
2000
750
80
100

232TECHNICAL SPECIFICATIONS
COMBI WEIGHTS
Weights (kg)
Short wheelbase version
Kerb weight
(including fuel,
spare wheel, tools
and accessories):
Payload including driver (1):
Maximum admitted
loads (2)
– front axle:
– rear axle:
– total:
Towable weight:
– trailer with brakes
– trailer without brakes
Maximum load on ball coupling
(trailer with brakes)
Maximum load on roof
(1) If special equipment is fitted (tow hitch, etc.), the unladen vehicle weight increases, thus reducing the specified payload.
(2) Loads not to be exceeded. The driver is responsible for arranging the loads so that they comply with these limits.2.8 JTD
1960 ÷ 2035
5P +600 ÷ 490 kg
1600
1600
2900
2000
750
80
100 2.0
1805
5P + 755 kg
1600
1600
2900
2000
750
80
1002.0 JTD
1865
5P + 695 Kg
1600
1600
2900
1600
750
80
1002.3 JTD
1935 ÷2010
5P +625 ÷ 515 kg
1600
1600
2900
2000
750
80
100