Bluetooth FIAT GRANDE PUNTO 2007 199 / 1.G Blue And Me User Guide

2626
}
Or, using voice interaction:
if you pronounce “Yes”, Blue&Me™
Navwill read the message, taking in-
to account any abbreviation con-
tained in the text, otherwise say
“No”, the system will store the
message so you can read it later (for
further information refer to para-
graph How to read the last SMS
text received). HOW TO READ THE LAST SMS
TEXT RECEIVED
After receiving a message, Blue&Me™
Navwill store it (both read or not read
message) in the inbox (refer to paragraph
Inbox).
?
To read the last message received,
open Blue&Me™ NavMain
menuand select option MESSAGE
READER, then press SRC/OKor
ß/MAIN.
Select the option READ LASTand
press SRC/OKor
ß/MAIN,
Blue&Me™ Navwill read the last
message received.
}
Or, using voice interaction:
Press
‘and pronounce “Read
last one”, Blue&Me™ Navwill
read the text of the last message re-
ceived.
MESSAGE READER
FUNCTIONS
If your mobile phone with Bluetooth®
wireless technology supports the message
reader function, at the arrival of a new
SMS text, Blue&Me™ Navplays a tone
and it will ask if you would like to read it
(according to set signal types.
For information on signal types refer to
paragraph Signal types.
?
Press SRC/OKor ß/MAINand
Blue&Me™ Navwill read the SMS
text received. The message will be
read taking into account any abbre-
viation or emoticon contained in the
text.
Otherwise press
&/ESC,
Blue&Me™ Navwill not read the
message but it will store it so you can
read the message later (for further in-
formation refer to paragraph How
to read the last SMS text re-
ceived).
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 26

2727
INBOX
Blue&Me™ Navwill store up to 20 re-
ceived messages (in the event of linked
messages, the number of stored messages
could be lower) when your mobile phone
is paired with Bluetooth
®. When the in-
box is full, the new incoming message will
delete the oldest message received (also
if not read yet). It is also possible to delete
just one message or to delete the entire
inbox (refer to paragraph Managing
messages).
?
To read a particular message stored
in the inbox, open the Blue&Me™
Nav Main menu and select the op-
tion MESSAGE READER, then
press SRC/OKor
ß/MAIN.
Select option INBOX, then press
SRC/OKor
ß/MAIN. Scroll
stored messages and select the
required one, the system will
display the SMS text sender’s data,
if available. Select READand
press SRC/OKor
ß/MAIN,
Blue&Me™ Navwill read the se-
lected message.
}
Or, using voice interaction:
Press
‘and pronounce “Message
reader”, after the acoustic signal
pronounce “Inbox”; Blue&Me™
Navwill display the first message
contained in the inbox (and also the
phone number of the SMS text
sender, if stored in the phonebook).
To scroll the Inboxpronounce
“Previous” or “Next”; when the
required message is displayed, say
“Read”, Blue&Me™ Navwill read
the selected message.
Pronounce “Delete” to delete the
selected message.MANAGING MESSAGES
For every message received, Blue&Me™
Navenables to:
❒ read it
❒ call directly the sender
❒ delete it
?
To do this when reading the message
open the Blue&Me™ NavMain
menu and then press buttons
SRC/OKor
ß/MAINto select the
required option.
}
Or, using voice interaction:
Press
‘and pronounce “Read” or
“Call” or “Delete”, the system will
select the required option.
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 27

42
Blue&Me™ Navwill display a list of
available points of interest categories.
Choose the required category from those
stored in the map software on your USB
device using the “
N“ or “O“ device and
press SRC/OKor
ß/MAINto confirm.
Now Blue&Me™ Navwill prompt you
to choose between LOCAL POINTS
of interest or ELSEWHERE.
❒If you select LOCAL POINTSof in-
terest by pressing SRC/OKor
ß/MAIN, Blue&Me™ Navwill dis-
play a list of points of interest belong-
ing to the category selected previously
(e.g. restaurants), sorted according to
distance from your current location, in-
cluding distanceand name. Scroll
through the list using the “
N” or “O”
keys and press SRC/OKor
ß/MAIN
to select the point of interest.
❒If you select points of interestELSE-
WHERE Blue&Me™ Navwill ask
you to specify the point of interest
country and town/city, in the same way
as when entering an address.
Blue&Me™ Navwill display a list of
points of interest in the chosen cate-
gory in alphabetical order.
Scroll through the list using the “
N”
or “O” keys and press SRC/OKor
ß/MAINto select the point of inter-
est required.Note
If the point of interest selected using the
previous options has a telephone number
and your Bluetooth
®mobile phone is
connected to Blue&Me™ Nav, the sys-
tem will allow you to decide whether to
start navigating toward the chosen point
of interest or make a phone call. Select the
required option by pressing SRC/OKor
ß/MAIN.
}Or use voice interaction by press-
ing
‘and saying “Navigation”.
Once the system message has fin-
ished, say “New destination” and
then “Points of interest”.
Then say “List” e Blue&Me™ Nav
will provide you with a list of the available
categories. If you already know which of
the categories stored on your USB device
you require you may say it directly.
Refer to the “NAVIGATION VOICE
COMMANDS” section for a list of avail-
able categories.The system will ask you for confirmation,
say “Yes“ or press SRC/OKor
ß/MAIN. Otherwise say “No“.
Now Blue&Me™ Navwill prompt you
to choose between “local” points of in-
terest or “elsewhere” by means of voice
synthesis.
❒If you select “local”, Blue&Me™
Navwill display a list of points of in-
terest belonging to the category se-
lected previously (e.g. restaurants),
sorted according to distance from your
current location, including distance
and name.
Scroll through the list using the “
N” or
“O” keys and press SRC/OKor
ß/MAINto select the required point
of interest.
❒If you say “elsewhere” Blue&Me™
Navwill ask you to specify the point of
interest country and town/city, in the
same way as when entering an address.
Blue&Me™ Navwill display a list of
points of interest in the chosen cate-
gory in alphabetical order.
Scroll through the list using the “
N” or
“O” keys and press SRC/OKor
ß/MAINto select the point of inter-
est required.
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 42

43
Note
If the point of interest selected using the
previous options has a telephone number
and your Bluetooth
®mobile phone is
connected to Blue&Me™ Nav, the sys-
tem will ask you if you wish to start navi-
gating toward the chosen point of interest
or make a phone call. Say “Start” to start
navigating or “Call” to make the phone
call.
After making the selection, Blue&Me™
Navwill display the name, distance and
address of the point of interest and ask for
confirmation in order to begin navigating.
Resume navigation
Blue&Me™ Navallows you to resume
navigation toward a set destination if nav-
igation has been suspended using the
STOP NAVIGATIONcommand.
?
To resume navigation, using manu-
al interaction:
Activate the main Menu, select the
NAVIGATIONoption and then
press SRC/OKor
ß/MAIN.Select the RESUME NAVIGA-
TIONoption by pressing SRC/OK
or
ß/MAIN.
Blue&Me™ Navwill ask you to
confirm the operation, press
SRC/OKor
ß/MAINto confirm
or
&/ESC” to cancel the above op-
eration.
}With voice interaction:
press
‘and say “Navigation” and
then, once you have heard the sys-
tem message, say “Resume navi-
gation”. The system will ask you to
say “Yes” to resume navigation or
“No” to cancel the above opera-
tion.
Note
If you turn your car’s ignition key to
STOPduring a navigation session,
Blue&Me™ Navwill automatically sus-
pend navigation.
When you turn your car’s ignition key to
MAR, the system will ask you if you wish
to resume navigation and show the preset
destination address on the reconfigurable
multifunction display.
?
With manual interaction press
SRC/OKor
ß/MAINto resume
navigation or
&/ESCin order not to
activate.
}With voice interaction, say “Yes”
to resume navigation or “No” in or-
der not to activate
Arrival information
Blue&Me™ Navis able to provide you
with an estimated time of arrival at your
destination and distance to the destination.
?
With manual interaction:
Activate the main Menu, select the
NAVIGATIONoption and then
press SRC/OKor
ß/MAIN.
Select the ARRIVAL INFORMA-
TIONoption by pressing SRC/OK
or
ß/MAIN.
Blue&Me™ Navwill display an es-
timated time of arrival and estimat-
ed distance remaining to the desti-
nation.
Note
When the car is moving, the arrival infor-
mation may be displayed immediate-
lyby pressing the NAVkey on the key-
pad near the courtesy light (see fig. 1).
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 43

4848
SETTINGS FUNCTIONS
The SETTINGSmenu enables you to
perform the following functions:
❒Pairing a mobile phone
❒Managing user data
❒Managing Blue&Me™ Navupdate
❒Media player settings
❒Advanced Options.
To perform functions and adjustments in
the SETTINGSmenu, you may use but-
tons on the steering wheel or voice com-
mands at car standstill. When the car is
moving, you can use voice commands on-
ly. Instructions are provided for both
methods.
If you encounter difficulties with any of
the Blue&Me™ Navsettings, consult
section TROUBLESHOOTING.PAIRING A MOBILE PHONE
Before you can use your mobile phone
with the hands-free phone function on
your car, you must create a pairing rela-
tionship between the mobile phone and
the hands-free phone system.
During the pairing procedure, the hands-
free phone system attempts to detect a
phone equipped with Bluetooth
®wire-
less technology within range, and then es-
tablishes the connection using a Personal
Identification Number (PIN). After a pair-
ing relationship is established, you can use
the hands-free phone system to make and
receive phone calls, and do other opera-
tions via your wirelessly-connected mo-
bile phone.
IMPORTANT The mobile phone pairing
PIN number is a special PIN generated
randomly at each new pairing and used
just for this operation. It is not your SIM
PIN and therefore it is not required to
store or to keep it in mind; loosing it will
not impair the hands-free phone system
operation.
The pairing procedure will only need to
be performed once for your mobile
phone. After this procedure Blue&Me™
Navwill automatically connect to your
phone each time you get into the car and
turn the ignition key to MAR. For road safety reasons, it is only possi-
ble to alter the navigation settings with the
car at a standstill.
?
To simulate the active route, by
means ofmanual interaction:
Activate the main Menu, select the
NAVIGATIONoption and then press
SRC/OKor
ß/MAIN.
Select the ROUTE SIMULATION
option and press SRC/OKor
ß/MAIN
to start the simulation.
To stop the simulation, simply press
the NAVkey on the keypad near the
courtesy light.
}Or with voice interaction:
Press
‘and say “Navigation”.
Once you have heard the system
message, say “route simulation”.
Blue&Me™ Navwill start the sim-
ulation.
To stop the simulation, press
‘and say “Navigation”
For road safety reasons, it is
only possible to enter a new
destination with the car at a stand-
still.
WARNING
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 48

4949
You can create a pairing relationship us-
ing the USER PAIRINGoption in the
SETTINGSmenu.
?
To create a pairing relationship us-
ing manual interaction, proceed as
follows:
Press
ß/MAINto open the Main
Menu, then select SETTINGSby
pressing SRC/OKor
ß/MAIN.
Select USER PAIRINGand then
press SRC/OKor
ß/MAIN. The
system will start the pairing proce-
dure.
The system shows the mobile
phone pairing PIN on the instru-
ment panel display and repeats it.
Please note that this is a PIN used
just for this operation, it is not your
SIM PIN.
For the next two steps, consult your
mobile phone owner’s manual about
Bluetooth
®pairing.On your mobile phone, query for
devices equipped with Bluetooth
®
wireless technology that are within
range (this option on your mobile
phone might be called Discover,
New Device, etc.). View the list of
Bluetooth
®wireless technology
enabled devices and select
“Blue&Me” (item that identifies
Blue&Me™ Navon your car).
When prompted by the mobile
phone, enter the PIN number
shown on the instrument panel dis-
play. If pairing is successful, the sys-
tem will say “Connecting” and
then the display will show the paired
mobile phone ID.
It is of vital importance to wait un-
til this confirmation message is dis-
played since pressing
ß/MAINor
&/ESCat this time may cancel the
pairing process. If pairing fails, an er-
ror message will be displayed and
the pairing procedure shall be re-
peated.
At first pairing, the system will say
“Welcome” immediately after
connecting. This message will no
longer be heard at next pairing pro-
cedures.The system asks if you would like to
copy your paired phone phone-
book. It is recommended to copy it.
To start copying the phonebook,
press SRC/OKor
ß/MAIN; oth-
erwise press
&/ESC. You can
download your phonebook at a lat-
er time using the menu option SET-
TINGS, USER DATA, PHONE-
BOOK.
For certain mobile phones the
phonebook is not copied automat-
ically, in this case you must send the
contacts in your mobile phone
phonebook to the hands-free phone
system using your mobile phone
keypad. If the hands-free phone sys-
tem asks you to do this, then per-
form this procedure following the
instructions specific to your mobile
phone and press
ß/MAINwhen
you have finished.
}
Or, using voice interaction:
Press
‘and pronounce “Set-
tings”, wait shortly for feedback
and then pronounce “Pairing”.
The system shows the mobile
phone pairing PIN on the instru-
ment panel display and repeats it.
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 49

5050
For the next two steps, consult your
mobile phone owner’s manual about
Bluetooth
®pairing.
On your mobile phone, query for
devices equipped with Bluetooth
®
wireless technology that are within
range (this option on your mobile
phone might be called Discover,
New Device, etc.). View the list of
Bluetooth
®wireless technology
enabled devices and select
“Blue&Me” (item that identifies
the hands-free kit in your car).
When prompted by the mobile
phone, enter the PIN number
shown on the instrument panel dis-
play using your mobile phone key-
pad. If pairing is successful, the sys-
tem will say “Connecting” and
then the display will show the paired
mobile phone ID.
It is of vital importance to wait un-
til this confirmation message is dis-
played since pressing
ß/MAINor
&/ESCat this time may cancel the
pairing process. If pairing fails, an er-
ror message will be displayed and
the pairing procedure shall be re-
peated.
At first pairing, the system will say
“Welcome” immediately afterconnecting. This message will no
longer be heard at next pairing pro-
cedures.
The system asks if you would like to
copy your paired phone phone-
book. It is recommended to copy it.
To start copying the phonebook,
pronounce “Yes”; otherwise say
“No”.
For certain mobile phones the
phonebook is not copied automat-
ically, in this case you must send the
contacts in your mobile phone
phonebook to the hands-free phone
system using your mobile phone
keypad. If the hands-free phone sys-
tem asks you to do this, then per-
form this procedure following the
instructions specific to your mobile
phone and press
ß/MAINwhen
you have finished.Practical hints
To improve both the voice recognition of
your phonebook entries and Blue&Me™
Navpronunciation accuracy when re-
peating the entries, please try to enter
contact entries and memorize them us-
ing the following criteria:
❒Avoid abbreviations.
❒Write foreign names according to the
way in which they are pronounced ac-
cording to the rules of the
Blue&Me™ Navlanguage set on your
car. For example, enter “Tanja” as
“Tanya”, to improve recognition accu-
racy and also to obtain the correct pro-
nunciation by the system.
❒When adding or editing contact entries,
insert the appropriate accent marks
when the name requires these marks
to be properly pronounced and recog-
nized by the system. For example en-
ter “Nicolo Rebora” as “Nicolò Rébo-
ra” to obtain the correct pronunciation.
❒When adding or editing contact entries,
bear in mind that certain isolated block
letter may be read as Roman numer-
als (e.g.: V may be read as fifth).
❒When calling contacts by voice, do not
include the middle names or middle ini-
tials of your contacts.
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 50

5151
Notes
❒You are only required to pair your mo-
bile phone a single time.
❒You can pair up to five mobile phones,
to be used one at a time.
❒On your paired mobile phone, the
Bluetooth®setting must be turned on
in order to connect your mobile phone
with Blue&Me™ Nav.
❒Before transferring your mobile phone
contacts to the hands-free system,
make sure that each contact first and
last name is unique and distinctly rec-
ognizable so that the voice recognition
system will function properly.
❒The system will download only valid
contact entries. A valid contact entry
must include both a name and at least
one phone number.
❒If you would like to re-pair your mobile
phone, delete the old pairing relation-
ship first. During this operation all user
data will be deleted. To delete the old
pairing relationship, use the menu option
USER DATA, DELETE USERS.
On your mobile phone, delete
“Blue&Me” from the list of Blue-
tooth
®devices following the specific in-
structions for your mobile phone (re-
fer to your mobile phone owner’s man-
ual).
❒If you download a phonebook with a
contacts list including more than 1000
contacts, the system may operate slow-
er than expected and voice recognition
of the names in your phonebook may
degrade.
❒If the pairing relationship is accidental-
ly deleted, the pairing procedure shall
be repeated. MANAGING USER DATA
You can make adjustments to the user da-
ta used by the hands-free phone system.
Specifically, you can reset all user data for
paired phones, delete the phonebook or
reset both user data and phonebook
downloaded. In this way the system is
brought back to initial conditions. You can
also download either the phonebook or
single contacts from your mobile phone
to the system, if you chose not to down-
load the phonebook during the phone
pairing procedure. You can make adjust-
ments to the user data used by the system
using the option USER DATA.
?
To open the USER DATAmenu
using manual interaction, proceed as
follows:
Press
ß/MAINto open the Main
Menu, then select SETTINGSby
pressing SRC/OKor
ß/MAIN.
Select USER DATAand then press
SRC/OKor
ß/MAIN.
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 51

6060
}
Or, using voice interaction:
Press
‘and pronounce “Loop
on” or “Loop off”.
Note
With Loop option on, previous and next
track playback will pass to the previous or
next audio track, that will start to be re-
peated.EXIT THE SETTINGS MENU
At the end of any of the operations de-
scribed above, you can exit the settings
menu as described below.
?
To exit the SETTINGSmenu us-
ing manual interaction:
Select EXITand then press
SRC/OKor
ß/MAIN.
}
Or, using voice interaction:
Press
‘and pronounce “Exit”.
Blue&Me™ Nav
SUPPORTED
MOBILE PHONES
Blue&Me™ Navsupports your person-
al devices via the Bluetooth®wireless
technology and USB.
MOBILE PHONES WITH
Bluetooth
®WIRELESS
TECHNOLOGY
Blue&Me™ Navsupports most of the
mobile phones supporting Bluetooth
®1.1
and HandsFree 1.0 profile (refer to Blue-
tooth
®wireless connection specifications
given on your mobile phone owner’s man-
ual).
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 60

6161
Due to the different marketed software
versions for mobile phones, certain auxil-
iary functions (e.g.: answering a second in-
coming phone call, transferring phone call
from hands-free phone system to mobile
phone and vice versa, etc.) could not ex-
actly correspond to what described in this
manual. In any case, phone conversation us-
ing the hands-free phone kit is not impaired.
“Pull” phones (phonebook
automatically downloaded)
“Pull” phone means that your mobile
phone supports phonebook automatic
download with Bluetooth
®wireless tech-
nology, your whole phonebook will be au-
tomatically downloaded to Blue&Me™
Navduring phone pairing procedure. “Push” phones (phonebook not
automatically downloaded)
“Push” phone means that your mobile
phone supports the single contact down-
load with Bluetooth
®wireless technolo-
gy. During the pairing procedure you will
be required to send phonebook contacts
from your mobile phone (your phone-
book is not automatically downloaded
during the phone pairing procedure).Mobile phones with message
reader
If your mobile phone can send messages
through the Bluetooth
®wireless tech-
nology, it is possible to read incoming
messages through the Blue&Me™ Nav
hands-free kit, to store them in the dedi-
cated inbox or to delete them.
603_83_390 Punto C3 GB 19-06-2007 11:21 Pagina 61