buttons FIAT IDEA 2005 1.G Radio CD Manual

8
RADIO WITH COMPACT DISC
AND MP3 CD PLAYER
RADIO WITH
COMPACT DISC PLAYER
1
2
3
4
5
6
7
8
9
10
SOURCE-SCAN
Display
N
˚
˜
O
÷
6
AUDIO-LOUDNESS
5-MIXSelect audio source/Scan function
Automatic station tuning
Eject CD
Manual station tuning
Automatic station tuning
Manual station tuning
Preset station 6
Audio settings/Loudness
Preset station 5/MIX functionSelect CD,CD Changer
(if installed) or Radio
Manual station tuning
TP: seek +
PTY: seek +
AF: seek +
Eject CD
Manual station tuning
TP: seek +
PTY: seek +
AF: seek +
Automatic station tuning
TP: seek -
PTY: seek -
AF: seek -
Manual station tuning
TP: seek -
PTY: seek -
AF: seek -
FM/AM:call preset
station 6
Bass (B)
Treble (T)
Fader (F)
Balance (B)
FM/AM: call preset
station 5FM/AM station scan
Fast manual station tuning
TP: seek +
PTY: seek +
AF: seek +
Fast manual station tuning
TP: seek +
PTY: seek +
AF: seek +
Fast automatic station tuning
TP: seek -
PTY: seek -
AF: seek -
Fast manual station tuning
TP: seek -
PTY: seek -
AF: seek -
FM/AM:call preset
station 6
Loudness on/off
FM/AM: call preset
station 5
ButtonButtons and front panel
Letters or symbol FunctionRADIO mode
Short-push function (less than 2 sec.) Long-push function (over 2 sec.)

10
RADIO WITH COMPACT DISC
AND MP3 CD PLAYER
RADIO WITH
COMPACT DISC PLAYER
11
12
13
14
15
16
17
18
19
20
4-RPT
MENU-PRESET SCAN
BAND-AUTOSTORE
3-II
AF-TA
2-CLR
1-TPM
PTY
ON/OFF VOLUME
CD slotPreset station 4/
REPEAT function
Menu function/Scan function
Frequency band selection
Preset station 3/
Playing pause
Alternative frequency (AF)
Traffic information (TA)
Preset station 2/CLR function
(CD track storage clearing)
Preset station 1/TPM function
(CD track sequence storing)
Programme Types
Radio on/off/
Volume adjustmentFM/AM:call preset
station 4
Menu on/off
FM1, FM2, FMT, MW, LW
FM/AM:call preset
station 3
TA ON/OFF
FM/AM: call preset
station 2
FM/AM: call preset
station 1
PTY ON/OFF
With radio on:
Audio Mute on/off
With radio off:radio on
Volume adjustment:
turn leftwards:to decrease
turn rightwards:turn rightwardsFM/AM:store preset
station 4
Scan preset stations
Store automatically in
FMT station range
FM/AM: store preset
station 3
AF ON/OFF
FM/AM: store preset
station 2
FM/AM: store preset
station 1
PTY: displays selected programme type
With radio on: radio off
With radio off: radio on
ButtonButtons and front panel
Letters or symbol FunctionRADIO mode
Short-push function (less than 2 sec.) Long-push function (over 2 sec.)

19
RADIO WITH COMPACT DISC
AND MP3 CD PLAYER
RADIO WITH
COMPACT DISC PLAYER
Multifunction buttons (5) and (6)
The multifunction buttons (5) and (6) call the preset
radio stations or select the next/previous track when
listening to a Compact Disc.
Press button (5) to choose stations from 1 to 6 or to
listen to the next track on the CD.
Press button (6) to choose stations from 6 to 1 or to
listen to the previous track on the CD. Volume adjustment/Mute function
buttons
The buttons for volume adjustment (2) and (3) and for
turning Mute on/off (1) work in the same way as the
corresponding buttons on the radio.
Radio frequency and
sound source select button
To cyclically select the radio frequencies and sound
sources, briefly and repeatedly press button (4).
The frequencies/sources available are: FM1, FM2, FMT,
MW, LW, CD (*), CDC (**).
(*) Only if the CD is inserted.
(**) Only if the CD Changer is connected.

22
RADIO WITH COMPACT DISC
AND MP3 CD PLAYER
RADIO WITH
COMPACT DISC PLAYER
SVC function
(volume changing with speed)
The SVC function makes it possible to automatically
adapt the volume level to the speed of the car,
increasing it as the speed increases to maintain the
ratio with the noise level in the passenger
compartment.
To activate the SVC function briefly press button 12
(MENU-PRESET SCAN), then use buttons 3 (
N) or 6
(
O) to scroll the menu stopping on the SVC function
and buttons 7 (
÷) or 5 (˜) to switch the function
on or off selecting respectively “SVC SETTING ON”
or “SVC SETTING OFF”.
This function can be turned on or off in all the
operating modes of the device (Radio/Compact
Disc/CD Changer).Mute function (turning off the volume
completely)
To switch on the Mute function,briefly press the
button/knob 19 (ON/OFF VOLUME). Volume will
gradually lower (Soft Mute function) and the display
will show the word “MUTE”.
To switch off the Mute function, briefly press the
button/knob 19 (ON/OFF VOLUME). Volume will
gradually become louder (Soft Mute function)
returning to the value set before switching on the
Mute function.
With the Mute function on:
❒all the other functions can be used;
❒turning the button/knob 19 (ON/OFF VOLUME)
the volume can be directly adjusted;
❒if an emergency alarm or a traffic bulletin arrives
with the TA function on, the message ignores the
Mute function;
❒with optional “Telephone provision”, an incoming
call ignores the Mute function. The Mute function
will be resumed at the end of the call;
❒if with TA function on,the radio does not broadcast
traffic info, a warning beep will sound.

23
RADIO WITH COMPACT DISC
AND MP3 CD PLAYER
RADIO WITH
COMPACT DISC PLAYER
Soft Mute function
The Soft Mute function is used to increase or decrease
volume gradually. The Soft Mute function is activated
by pressing one of the 6 preselection buttons, button
13 (BAND-AUTOSTORE) or button/knob 19
(ON/OFF VOLUME).
Tone adjustment (bass/treble)
Proceed as follows:
❒briefly and repeatedly press the 9 (AUDIO-
LOUDNESS) button until the display shows “BASS”
or “TREBLE”;
❒press 3 (
N) or 6 (O) to increase/decrease the
basses or trebles.
Pressing the buttons briefly the change is gradual by
steps. Pressing longer, changing is faster.
For approx. four seconds the display shows the levels
of the basses/trebles (from –6 to +6).Balance adjustment
Proceed as follows:
❒briefly and repeatedly press the 9 (AUDIO-
LOUDNESS) button until the display shows
“BALANCE” (select Balance function);
❒press button 3 (
N) to increase the sound from the
right speakers or button 6 (
O) to increase the
sound from the left speakers.
Pressing the buttons briefly the change is gradual by
steps. Pressing longer, changing is faster. For few
seconds the display shows the levels of balancing from
“RIGHT+9” to “LEFT+9”.
Select “CENTER” to set the same value for both right
and left speakers.
After about 4 seconds from last setting, the display will
return to the main radio screen.

24
RADIO WITH COMPACT DISC
AND MP3 CD PLAYER
RADIO WITH
COMPACT DISC PLAYER
Fader adjustment
Proceed as follows:
❒briefly and repeatedly press the 9 (AUDIO-
LOUDNESS) button until the display shows
“FADER” (select Fader function);
❒press button 3 (
N) to increase the sound from the
rear speakers or button 6 (
O) to increase the
sound from the front speakers.
Pressing the buttons briefly the change is gradual by
steps. Pressing longer,changing is faster. For few
seconds the display shows the levels of fader from
“FRONT+9” to “REAR+9”.
Select “CENTER” to set the same value for both front
and rear speakers.
After about 4 seconds from last setting, the display will
return to the main radio screen.
NOTE Audio adjustments (Bass, Treble, Fader,
Balance) will deactivate in the following cases (after
having performed the required adjustments, values will
be stored):
❒after about 4 seconds from last adjustment;
❒pressing button 9 (AUDIO-LOUDNESS) again;
❒adjusting or deactivating a function requiring info
display;
❒activating a new function (e.g.: TA, Tel Mute or
inserting a CD).Loudness function
The Loudness function improves the sound volume
when listening at low level, increasing the basses and
trebles. It is cut off when the volume is set to
maximum.
To switch the function on/off,keep button 9 (AUDIO-
LOUDNESS) pressed until hearing the “beep”. The
function condition (on or off) is shown on the display
for few seconds by “LOUDNESS ON” or
“LOUDNESS OFF”.
TELEPHONE PROVISION (where provided)
If the handsfree kit is installed on the car, when a
phone call is received the radio audio is connected to
the phone input, muting the radio or the CD. The
telephone sound is heard with a fixed volume, but it
can be adjusted during the conversation by
button/knob 19 (ON/OFF VOLUME).
The fixed telephone volume can be adjusted through
the “PHONE” function of the menu (see paragraph
“MENU”).

25
RADIO WITH COMPACT DISC
AND MP3 CD PLAYER
RADIO WITH
COMPACT DISC PLAYER
The only buttons active during phone calls are:
❒19 (ON/OFF VOLUME): radio on/off and volume
adjustment;
❒15 (AF-TA): traffic information.
While the sound is off for a phone call, the display
shows the word “PHONE”.
During a call, every function, excluding AutoSTore and
Search (operating mode selection) is disabled.
The sound of the phone call will be interrupted in the
case of transmission of a traffic bulletin or a PTY31
announcement; if wishing to interrupt the bulletin
press button 15 (AF-TA).
With sound system on and engine off (ignition key to
STOP), the sound system will not turn off during a
phone call but it will turn off automatically at the end
of the conversation.RADIO (Tuner)
When the set is turned on the last function selected
before turning off is played (Radio, Compact Disc or
CD Changer).
To select the Radio source while listening to a
Compact Disc, press briefly and repeatedly button 1
(SOURCE-SCAN) until this function is selected.
When Tuner is on,the display will show the selected
station name (RDS stations only)or frequency, the
frequency band (e.g.: FM1) and the preselection button
number (e.g.: P1 = station stored on button 1).

26
RADIO WITH COMPACT DISC
AND MP3 CD PLAYER
RADIO WITH
COMPACT DISC PLAYER
Selecting the frequency band
If in the Radio mode,briefly and repeatedly press
button 13 (BAND-AUTOSTORE) to select the
required reception band.
Every time the button is pressed the following bands
are selected in sequence “FM1”, “FM2”, “FMT”, “MW”
and “LW” shown by the respective wording on the
display.
The last station selected in the respective frequency
band will be tuned specially if the station is not stored
on the presetting buttons.
If selected station is stored on one of the presetting
buttons, the display will show the presetting number
for few seconds; then the display will show again the
station frequency.
The FM band is divided into sections: FM1, FM2 and
FMT. The FMT reception band is reserved to the
stations stored automatically with the AutoSTore
function.
The radio is always ready to receive stations in the
RDS mode (Radio Data System).Presetting buttons
The buttons with symbols from 1 to 6 (“17”, “16”,
“14”, “11”, “10”, “8”) make it possible to set the
following presettings:
❒18 in the FM band (6 in FM1, 6 in FM2, 6 in FMT);
❒6 in the MW band;
❒6 in the LW band;
❒6 types of PTY programming (only in the FM mode
when PTY is selected).
To call a preset station, choose the required frequency
band and then press briefly the corresponding preset
button (from 1 to 6). For a few seconds the display
will show the number of the station preset and the
related frequency before showing the frequency band
and the name of the RDS station.
If the PI code (Program Index) can no longer receive at
the frequency allocated to a preset button, the radio
will start searching this PI on another frequency as
soon as the car leaves the area covered by the
previous frequency. The display will show “SEARCH”.

27
RADIO WITH COMPACT DISC
AND MP3 CD PLAYER
RADIO WITH
COMPACT DISC PLAYER
Should it be not possible to receive the PI stored on a
frequency after searching along the whole band, the
radio will tune to the stored frequency.
Pressing the respective preset button for longer than 2
seconds will store the tuned station (the sound system
will always store the frequency and the PI code).
Storing is confirmed by a beep.
Storing the last station heard
The radio automatically keeps in storage the last
station heard for each reception band, which is then
tuned when the radio is turned on or the reception
band is changed.
Automatic tuning
Briefly press button 3 (
N) or 6 (O) to start
automatically searching the tuning for the next station
that it is possible to receive in the direction chosen.
If button 3 (
N) or 6 (O) is pressed for longer, quick
searching takes place: upon having tuned in to the first
well receivable station, the tuner stops for about 1
second (in Mute) before quick searching continues.
When the button is released, the tuner stops on the
next receivable station.
If the TA function is on (traffic information), the tuner
only searches stations which broadcast traffic bulletins.If the PTY function is on, the tuner only searches PTY
stations. When searching, the display alternatively
shows the type of programme and the word
“SEARCH”.
If the station on which the tuner stops is one of the
stations stored with the preset buttons, the display will
show the presetting number for a few seconds.
Manual tuning
This allows manual station searching in the chosen
band.
Proceed as follows:
❒select the band with button 13 (BAND-
AUTOSTORE): FM1, FM2, FMT, MW or LW;
❒press briefly and repeatedly button 7 (
÷) or 5
(
˜) to start searching in the chosen band.
Pressing one of the buttons 7 (
÷) or 5 (˜)
longer obtains fast forward searching, which is
stopped when the button is released.
To turn on manual tuning search it is necessary to turn
off the PTY and AF (alternative frequencies), if on.
If the station tuned is a station stored with the preset
buttons, the display will show the presetting number
for a few seconds.

30
RADIO WITH COMPACT DISC
AND MP3 CD PLAYER
RADIO WITH
COMPACT DISC PLAYER
Manual station storage
The station being heard can be stored in the range
selected with buttons (“17”, “16”, “14”, “11”, “10”,
“8”) numbered from 1 to 6.
Keep one of these buttons (from 1 to 6) pressed until
receiving the confirmation “beep”. After storage,the
display shows the number of the button with which
the station has been stored.
AutoSTore function (automatic station
storage)
To switch on the Autostore function, keep button 13
(BAND-AUTOSTORE) pressed until receiving the
confirmation “beep”. With this function the radio
automatically stores the six stations with the strongest
signal in decreasing order of intensity of the FMT
frequency band.
IMPORTANT Activating the AutoSTore function
cancels the stations stored previously in the FMT band.If the TA function is on (traffic information), only the
stations that send traffic information will be stored.
This function may also be turned on when listening to
a Compact Disc, CD Changer (if installed) or in
Telephone mode.
During automatic storage the display shows “FM AST”.
To interrupt AutoSTore press button 13 (BAND-
AUTOSTORE) again: the radio will automatically tune
to the station heard before activation of the
AutoSTore function.
At the end of the AutoSTore function the radio
automatically tunes on the first preset station in the
FMT band stored on preset button 1-TPM (17).
On buttons (“17”, “16”, “14”, “11”, “10”, “8”)
numbered from 1 to 6, the stations are automatically
stored that give a strong signal in that moment in the
present band.