technical specifications FIAT PANDA 2015 319 / 3.G User Guide
[x] Cancel search | Manufacturer: FIAT, Model Year: 2015, Model line: PANDA, Model: FIAT PANDA 2015 319 / 3.GPages: 196, PDF Size: 19.49 MB
Page 146 of 196
Versions
0.9 TwinAir Turbo 90 HP(*)1.3 16V MultiJet 75 HP
1.3 16V MultiJet 80 HP(*)
Type code 312A7000 199A9000 312A8000
Cycle Otto Diesel Diesel
Number and position of cylinders 2 in line 4 in line 4 in line
Piston bore and stroke (mm) 80.5 x 86.0 69.6 x 82 69.6 x 82
Total displacement (cm³) 875 1248 1248
Compression ratio 10 16.8 16.8
Maximum power (EEC) (kW)
66.2 / 57
(**)55 59
Maximum power (EEC) (HP)
90 / 77.5
(**)75 80
corresponding engine speed (rpm) 5500 4000 4000
Maximum torque (EEC) (Nm)
145 / 100
(**)190 190
Maximum torque (EEC) (kgm)
14.8 / 10.2
(**)19.4 19.4
corresponding engine speed (rpm)
1900 / 2000
(**)1500 1500
Spark plugs NGK ILKR9G8 - -
FuelUnleaded petrol 95 RON (EN
228 specification)Diesel for motor vehicles (EN
590 Specification)Diesel for motor vehicles (EN
590 Specification)
(*) For versions/markets, where provided
(**) With ECO button pressed
144
TECHNICAL SPECIFICATIONS
Page 148 of 196
Versions Rims Tyres provided Snow tyres
Space-saver wheel(*)
0.9 TwinAir Turbo
HP5.5J x 14H2 - ET35
175/65 R14 82T
(**)175/65 R14 84Q (M+S) 135/80 R14 84M
5.5J x 14H2 - ET35175/65 R14 82T
Goodyear Duragrip
(**)
(***)175/65 R14 84Q (M+S) 135/80 R14 84M
6J x 15H2 - ET35
(****)185/55 R15 82T(°)185/55 R15 82Q (M+S) 135/80 R14 84M
6J x 15H2 - ET35
(****)175/65 R15 84T (M+S)(°°) (°°°)- 125/80 R15 95M
0.9 TwinAir Turbo
Natural Power6Jx15H2-ET35
(#)175/65 R15 84T(°°°)175/65 R15 84T (M+S)(°°°)-
(*) For versions/markets, where provided.
(**) The tyre can be fitted with reduced size snow chains: 9 mm.
(***) For versions/markets, where provided. Tyres offering equivalent performance can be used as an alternative.
(****) Alloy wheel rim.
(°) Not suitable for chains.
(°°) For Trekking versions.
(°°°) The tyre can be fitted with reduced size snow chains: 7 mm.
(#) Trekking versions: alloy rims as standard outfit. Upon demand for the other versions.
146
TECHNICAL SPECIFICATIONS
85
Page 150 of 196
Panda 4x4 versions
Versions Rims Tyres provided Snow tyres
Space-saver wheel(*)
0.9 TwinAir Turbo
HP6J x 15H2 - ET35
175/65 R15 84T M+S(**)- 125/80 R15 95M
6J x 15H2 - ET35
175/65 R15 84T
(**) (***)- 125/80 R15 95M
1.3 16V MultiJet6J x 15H2 - ET35
175/65 R15 84T M+S
(**)- 125/80 R15 95M
6J x 15H2 - ET35
175/65 R15 84T
(**)- 125/80 R15 95M
(*) For versions/markets, where provided.
(**) The tyres can be fitted with reduced size snow chains: 7 mm.
(***) Tyres available on request.
Panda Cross versions
Versions Rims Tyres provided Snow tyres
Space-saver wheel(*)
0.9 TwinAir Turbo
HP6 J x 15H2 ET35
175/65 R15 84T M+S
(**)- 125/80 R15 95M
6 J x 15H2 ET35
175/65 R15 84T
(**)- 125/80 R15 95M
6 J x 15H2 ET30185/65 R15 88H M+S
(***)- 125/80 R15 95M
6 J x 15H2 ET30
185/65 R15 88H
(***)- 125/80 R15 95M
1.3 16V MultiJet 80 HP6 J x 15H2 ET35
175/65 R15 84T M+S
(**)- 125/80 R15 95M
6 J x 15H2 ET35
175/65 R15 84T
(**)- 125/80 R15 95M
6 J x 15H2 ET30185/65 R15 88H M+S
(***)- 125/80 R15 95M
6 J x 15H2 ET30
185/65 R15 88H
(***)- 125/80 R15 95M
(*) For versions/markets, where provided.
(**) The tyre can be fitted with chains.
(***) Tyre not suitable for fitting snow chains.
148
TECHNICAL SPECIFICATIONS
85
90
Page 152 of 196
Panda Cross / Panda 4x4 versions
Ty r e sUnladen/medium load Full load
Space-saver
wheel(*)Front Rear Front Rear
175/65 R15 84T M+S(*)2.2 2.1 2.5 2.5 4.2
175/65 R15 84T
(*)2.2 2.1 2.5 2.5 4.2
175/65 R15 84T
(**)2.4 2.2 2.7 2.7 4.2
185/65 R15 88H
(**)2.4 2.2 2.7 2.7 4.2
(*) For versions/markets, where provided.
(*) For Panda 4x4 versions
(**) For Panda Cross versions
NoteFor Cross and 4x4 versions, do not drive deliberately for long distances with the tyres flat (not at the prescribed pressure)
and/or with greatly varying pressures between front axle and rear axle, in order to avoid any malfunction of the 4x4 drive.
SNOW CHAINS
183) 184) 185)66)
Important
The use of snow chains should be in compliance with local regulations of each country. In certain countries, tyres marked with
code M+S (Mud and Snow) are considered as winter equipment; therefore their use is equivalent to that of the snow chains.
The snow chains may be applied only to the front wheel tyres.
Check the tension of the snow chains after the first few metres have been driven.
Using snow chains with tyres with non-original dimensions may damage the vehicle.
Using different size or type (M+S, snow, etc.) tyres between front and rear axle may adversely affect vehicle driveability, with the
risk of losing control of the vehicle and resulting accidents.
Snow chains cannot be fitted to the space-saver wheel (for versions/markets, where provided). If a front tyre is punctured,
replace a rear wheel with the space-saver wheel and move the rear wheel to the front axle. In this way, with two normal drive
wheels at the front, snow chains can be fitted.
150
TECHNICAL SPECIFICATIONS
Page 154 of 196
DIMENSIONS
Dimensions are expressed in mm and refer to the vehicle equipped with its standard-supplied tyres. Height is measured with
vehicle unladen.
Panda versions
ABCDE FGH I
3653 747 2300 606
1551/1605(*)1407/1408(*)1643
1409/1414(*)1882
(*) Natural Power versions.
128F1D0103
152
TECHNICAL SPECIFICATIONS
Page 156 of 196
Panda Cross versions
ABCDE FGH I
3705 772.5 2300 632.5 1656.5 1406 1662 1403 1882
130F1D0121
154
TECHNICAL SPECIFICATIONS
Page 158 of 196
Weights (kg) 1.2 8V 69 HP 1.2 8V 69 HP LPG 1.3 16V MultiJet
Unladen weight (with all fluids, fuel tank 90% full and
without optional equipment):940 980 1035
Payload including the driver:
(*)480 (4-seater) /
470480 (4-seater) /
Maximum permitted loads
(**)
– front axle: 770 770 855
– rear axle: 760 760 760
– total:1420 (4-seater) /
14501515 (4-seater) /
Towable loads
– braked trailer: 800
(***)900
– non-braked trailer: 400
(***)400
Maximum load on roof: 55 55 55
Maximum load on ball joint (braked trailer): 60
(***)60
(*) If special equipment is fitted (sun roof, tow hitch, etc.) the unladen vehicle weight increases, thus reducing the specified payload in relation to the maximum
permitted loads.
(**) Loads not to be exceeded. The user is responsible for arranging goods in the luggage compartment and/or load platform within the maximum permitted loads.
(***)IMPORTANT A trailer cannot be towed so there are no provisions for fitting a tow hook.
156
TECHNICAL SPECIFICATIONS
500 (5-seater) 500 (5-seater)
1440 (5-seater) 1535 (5-seater)
Page 160 of 196
Panda VAN versions
Weights (kg) 0.9 TwinAir 65 HP0 . 9 TwinAir Turbo
HP0.9 TwinAir Turbo 0.9 TwinAir Turbo
Natural Power
Unladen weight (with all fluids, fuel tank
90% full and without optional
equipment):950 (2-seater) /
980 1035 1075
Payload including the driver:
(*)505 (2-seater) /
490 510 460
Maximum permitted loads
(**)
– front axle: 770 855 875 875
– rear axle:770 (2-seater) /
780 810 810
– total:1455 (2-seater) /
1470 1545 1535
Towable loads
– braked trailer: 800 800 800
(***)
– non-braked trailer: 400 400 400(***)
Maximum load on roof: 60 60 55 55
Maximum load on ball joint (braked
trailer):60 60 60
(***)
(*) If special equipment is fitted (sun roof, tow hitch, etc.) the unladen vehicle weight increases, thus reducing the specified payload in relation to the maximum
permitted loads.
(**) Loads not to be exceeded. The user is responsible for arranging goods in the luggage compartment and/or load platform within the maximum permitted loads.
(***)IMPORTANT A trailer cannot be towed so there are no provisions for fitting a tow hook.
158
TECHNICAL SPECIFICATIONS
8 5 HP 4x4
85
960 (4-seater)
490 (4-seater)
780 (4-seater)
1450 (4-seater)
Page 162 of 196
SUPPLIES
0.9 TwinAir 0.9 TwinAir
Turbo1.2 8V 69 HP Prescribed fuels and original lubricants
Fuel tank (litres): 37
37/35(*)37
Unleaded petrol not less than 95 RON (EN 228
specification)
including a reserve of (litres): 5 ÷ 7 5 ÷ 7 5 ÷ 7
Engine cooling system (litres): 4.8 5.2 4.6Mixture of 50% distilled water and 50%
PARAFLU
UP(**)
Engine sump (litres): 2.8 2.8 2.5SELENIA DIGITEK P.E (0.9 TwinAir and 0.9
TwinAir Turbo versions) / SELENIA K P.E. (1.2 8V
69 HP versions) / SELENIA MULTIPOWER GAS
5W-40 (LPG versions) Engine sump and filter (litres): 3.2 3.2 2.8
Gearbox casing/differential: 1.65 (litres)1.65 (litres) /
(***)1.65 (litres)TUTELA TRANSMISSION TECHNYX (0.9
TwinAir, 0.9 TwinAir Turbo and 1.2 8V 69 HP
versions) / TUTELA TRANSMISSION
GEARFORCE (LPG and Natural Power versions)
Rear differential (kg)
(***):- 0.62 - TUTELA TRANSMISSION CROSS
Dualogic gearbox hydraulic
activation system (litres):- 0.7 - TUTELA CS SPEED
Hydraulic brake circuit (litres): 0.55 0.55 0.55 TUTELA TOP 4
Windscreen and rear window
washer fluid reservoir (litres):2.7 2.7 2.7Mixture of water and TUTELA PROFESSIONAL
SC35
(*) Trekking versions.
(**) When the vehicle is used in particularly harsh weather conditions, we recommend using a mixture of 60%PARAFLUUPand 40% demineralised water.
(***)Panda Cross and Panda 4x4 versions
160
TECHNICAL SPECIFICATIONS
60 HP/65 HP
1.7 (kg)
Page 164 of 196
FLUIDS AND LUBRICANTS
Your vehicle is equipped with an engine oil that has been thoroughly developed and tested in order to meet the requirements of
the Scheduled Servicing Plan. Constant use of the prescribed lubricants guarantees the fuel consumption and emission
specifications. Lubricant quality is crucial for engine operation and duration.
UseFluid and lubricant specifications for correct
vehicle operationOriginal fluids and
lubricantsReplacement interval
Lubricants for
petrol engines and
1.2 8V 69 HP
67)
SAE 5W-40 ACEA C3 grade totally synthetic
lubricant. FIAT Classification 9.55535-S2.SELENIA K P.E.
Contractual Technical
Reference No. F603.C07According to the Scheduled
Servicing Plan
Lubricants for
petrol engines 0.9
TwinAir and 0.9
TwinAir Turbo
67)
SAE 0W-30 ACEA C2 grade totally synthetic
lubricant. FIAT 9.55535-GS1 classification.SELENIA DIGITEK P.E.
Contractual Technical
Reference no. F020.B12According to the Scheduled
Servicing Plan
Lubricant for
petrol/LPG
engines
67)
SAE 5W-40 ACEA C3 grade totally synthetic
lubricant. FIAT 9.55535-T2 classification.SELENIA MULTIPOWER
GAS 5W-40
Contractual Technical
Reference No. F922.E09According to the Scheduled
Servicing Plan
Diesel engine
lubricants
67)
SAE 5W-30 ACEA C2 grade totally synthetic
lubricant. FIAT Classification 9.55535-S1.SELENIA WR P.E.
Contractual Technical
Reference No. F510.D07According to the Scheduled
Servicing Plan
In the case of emergency, if lubricants with the prescribed specifications are not available, products with the minimum indicated
ACEA performance can be used for topping up; in this case optimal performance of the engine is not guaranteed. For 0.9
TwinAir and 0.9 TwinAir Turbo engines, only use lubricants with indicated SAE grade and specifications.
WARNING
67)The use of products with specifications other than those indicated above could cause damage to the engine not covered by the warranty.
162
TECHNICAL SPECIFICATIONS