Oil FIAT PANDA 2015 319 / 3.G Owner's Manual

FLUIDS AND LUBRICANTS
Your vehicle is equipped with an engine oil that has been thoroughly developed and tested in order to meet the requirements of
the Scheduled Servicing Plan. Constant use of the prescribed lubricants guarantees the fuel consumption and emission
specifications. Lubricant quality is crucial for engine operation and duration.
UseFluid and lubricant specifications for correct
vehicle operationOriginal fluids and
lubricantsReplacement interval
Lubricants for
petrol engines and
1.2 8V 69 HP
67)
SAE 5W-40 ACEA C3 grade totally synthetic
lubricant. FIAT Classification 9.55535-S2.SELENIA K P.E.
Contractual Technical
Reference No. F603.C07According to the Scheduled
Servicing Plan
Lubricants for
petrol engines 0.9
TwinAir and 0.9
TwinAir Turbo
67)
SAE 0W-30 ACEA C2 grade totally synthetic
lubricant. FIAT 9.55535-GS1 classification.SELENIA DIGITEK P.E.
Contractual Technical
Reference no. F020.B12According to the Scheduled
Servicing Plan
Lubricant for
petrol/LPG
engines
67)
SAE 5W-40 ACEA C3 grade totally synthetic
lubricant. FIAT 9.55535-T2 classification.SELENIA MULTIPOWER
GAS 5W-40
Contractual Technical
Reference No. F922.E09According to the Scheduled
Servicing Plan
Diesel engine
lubricants
67)
SAE 5W-30 ACEA C2 grade totally synthetic
lubricant. FIAT Classification 9.55535-S1.SELENIA WR P.E.
Contractual Technical
Reference No. F510.D07According to the Scheduled
Servicing Plan
In the case of emergency, if lubricants with the prescribed specifications are not available, products with the minimum indicated
ACEA performance can be used for topping up; in this case optimal performance of the engine is not guaranteed. For 0.9
TwinAir and 0.9 TwinAir Turbo engines, only use lubricants with indicated SAE grade and specifications.
WARNING
67)The use of products with specifications other than those indicated above could cause damage to the engine not covered by the warranty.
162
TECHNICAL SPECIFICATIONS

UseFluid and lubricant specifications for correct
vehicle operationOriginal fluids and lubricants Applications
Lubricants and
greases for drive
transmissionSAE 75W-85 grade synthetic-base lubricant. FIAT
Classification 9.55550-MX3.TUTELA TRANSMISSION
TECHNYX
Contractual Technical Reference
No. F010.B05Manual gearbox and
differential (0.9 TwinAir, 0.9
TwinAir Turbo and 1.2 8V
HP versions)
SAE 75W grade synthetic lubricant. FIAT 9.55550-
MZ6 classification.TUTELA TRANSMISSION
GEARFORCE
Contractual Technical Reference
no. F002.F10Manual gearbox and
differential (1.3 16V MultiJet,
LPG and Natural Power
versions)
Fully synthetic oil with dedicated additive. FIAT
9.55550-SA1 classification.TUTELA CS SPEED
Contractual Technical Reference
No. F005.F98Dualogic gearbox hydraulic
activation system
SAE 75W-85 grade synthetic lubricant. FIAT
Classification 9.55550 - DA4.TUTELA TRANSMISSION
CROSS
Contractual Technical Reference
No. F001.D12Rear differential
(°)
SAE 75W-85 grade synthetic lubricant, which
exceeds API GL5 specifications. FIAT 9.55550
classification - DA3.TUTELA TRANSMISSION
MULTIAXLE
Contractual Technical Reference
No. F426.E06Drive transmission idler unit
(PTU)
(°)
Molybdenum disulphide grease, for use at high
temperatures. NL.G.I. 1-2 consistency FIAT 9.55580
classificationTUTELA ALL STAR
Contractual Technical Reference
No. F702.G07Wheel side constant velocity
joints
Grease for constant velocity joints with low friction
coefficient. NL.G.I. 0-1 consistency FIAT 9.55580
classificationTUTELA STAR 700
Contractual Technical Reference
No. F701.C07Differential-side constant
velocity joints
Brake fluidSynthetic fluid for brake and clutch systems. Exceeds
specifications: FMVSS no. 116 DOT 4, ISO 4925 SAE
J1704 FIAT 9.55597 classificationTUTELA TOP 4
Contractual Technical Reference
No. F001.A93Hydraulic brakes and
hydraulic clutch controls
(°) Panda Cross and Panda 4x4 versions.
163
69