clock setting FIAT PUNTO EVO 2010 1.G Owners Manual

Selecting “Set Clock”
– briefly press the MENU ESC button to select the first
value to change (hours);
– press the +and –buttons (with single presses) to se-
lect the new setting;
– briefly press the MENU ESC button to store the new
setting and go to the next setup menu option (minutes);
– after setting the values with the same procedure, go back
to the previous menu item.
Hold down the MENU ESC button:
– to quit the setup menu if you are in the menu;
– to quit to the menu if you are setting an option;
– to save only the settings already stored (and confirmed
by pressing the MENU ESC button).
The setup menu environment is timed; when quitting the
menu due to timing expiry, only the settings stored by the
user are saved (having been confirmed by briefly pressing
button MENU ESC).
CONTENTS TECHNICAL
SPECIFICATIONS SERVICING
AND CARE IN AN
EMERGENCY WARNING LIGHTS
AND MESSAGES STARTING
AND DRIVING SAFETY
KNOWING
YOUR
VEHICLE
19
Briefly press button MENU ESC to start browsing from
the standard screen. Press +or –to browse within the
menu.
NBFor safety reasons, only the short menu may be ac-
cessed while the car is moving (“SPEEd” setting). Stop the
car to access the full menu.
The menu includes the following items:
– SPEEd
– CornEr (for versions/markets where provided)
– Hour
–bUZZ
– Unit
– BAG P
– drl (for versions/markets where provided)
001-036 PUNTO FL EN 4ed 18-01-2010 12:21 Pagina 19

Hour
(Setting the clock)
With this function, it is possible to set the time.
To do so, proceed as follows:
– briefly press MENU ESC: the “hours” will flash on the
display;
– press +or –to set the value;
– briefly press MENU ESC: the “minutes” will flash on the
display;
– press +or –to set the value;
– briefly press the MENU ESC button to go back to the
menu screen or hold the button down to go back to the
standard screen without saving.
bUZZ
(Adjusting the buzzer volume)
This function is used to adjust the volume of the audible
signal (buzzer) that sounds in the event of failure/warning
indications and when the MENU ESC, +and –buttons are
pressed.
To set the desired volume, proceed as follows:
– briefly press MENU ESC: the display will show the word-
ing (bUZZ);
– press +or –to select the required volume (adjustable
over 8 levels).
– briefly press the MENU ESC button to go back to the
menu screen or hold the button down to go back to the
standard screen without saving.Unit
(Setting the distance unit)
With this function, it is possible to set the distance unit.
To do so, proceed as follows:
– briefly press MENU ESC: the display will show the word-
ing (Unit) and the previously set unit (km or mi);
– press +or –to select the required distance unit.
– briefly press the MENU ESC button to go back to the
menu screen or hold the button down to go back to the
standard screen without saving.
CONTENTS TECHNICAL
SPECIFICATIONS SERVICING
AND CARE IN AN
EMERGENCY WARNING LIGHTS
AND MESSAGES STARTING
AND DRIVING SAFETY
KNOWING
YOUR
VEHICLE
21
001-036 PUNTO FL EN 4ed 18-01-2010 12:21 Pagina 21

CONTENTS TECHNICAL
SPECIFICATIONSSERVICING
AND CAREIN AN
EMERGENCY WARNING LIGHTS
AND MESSAGESSTARTING
AND DRIVINGSAFETY
KNOWING
YOUR
VEHICLE
26
SETUP MENU
(multifunction display/
reconfigurable multifunction display)
The menu comprises a series of functions arranged in a
circle which can be selected through the +and –buttons
to access the different operations and settings described
in the following paragraphs. A submenu is provided for
some items (clock and unit setting).
The setup menu can be activated by pressing the MENU
ESC button briefly.
Press buttons +and – to scroll the setup menu options.
Management modes differ from each other according to
the option selected.
Selecting an option from the main menu without a submenu
– Briefly press MENU ESC to select the main menu option
you wish to set;
– Press +or –(with single presses) to select the new set-
ting;
– briefly press the MENU ESC button to store the new
setting and to go back to the main menu option selected
previously.Selecting an option from the main menu with a submenu:
– Briefly press the MENU ESC button to display the first
submenu option;
– Press +or –(with single presses) to scroll all the sub-
menu options;
– Briefly press the MENU ESC button to select the dis-
played submenu option and to open the relevant setup
menu;
– Press +or –(with single presses) to select the new set-
ting for this submenu option;
– Briefly press the MENU ESC button to store the new
setting and go back to the previous menu option.
Selecting “Date” and “Set time”:
– Briefly press MENU ESC to select the first value to
change (e.g. hours/minutes or year/month/day);
– Press +or –(with single presses) to select the new set-
ting;
– Briefly press MENU ESC to store the new setting and
go to the next setup menu option; if this is the last one
you will go back to the previous menu option.
001-036 PUNTO FL EN 4ed 18-01-2010 12:21 Pagina 26

30
KNOWING
YOUR
VEHICLE
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING
AND CARE
TECHNICAL
SPECIFICATIONS
CONTENTS
TRIP B ACTIVATION/DATA
(Trip B enablement)
This function may be used to activate (On) or deactivate
(Off) the Trip B display (partial trip).
For more information see the “Trip computer” section.
For activation/deactivation, proceed as follows:
– briefly press MENU ESC: On or Off will flash on the dis-
play (depending on previous setting);
– press +or –to make your choice;
– briefly press the MENU ESC button to go back to the
menu screen or hold the button down to go back to the
standard screen without saving.SET TIME
(Setting the clock)
This function allows you to set the clock through two sub-
menus: “Time” and “Mode”.
To carry out the adjustment, proceed as follows:
– briefly press MENU ESC: the display will show the two
submenus “Time” and “Mode”;
– press +or –to switch between the two sub-menus;
– once you have selected a submenu, press MENU ESC
briefly;
– if selecting “Time”, briefly press MENU ESC – the “hours”
will flash on the display;
– press +or –to set the value;
– briefly press MENU ESC: the “minutes” will flash on the
display;
– press +or –to set the value;
– if selecting “Mode”,briefly press MENU ESC: the mode
will flash on the display;
– press +or –to select “24h” or “12h”.
001-036 PUNTO FL EN 4ed 18-01-2010 12:22 Pagina 30

263
KNOWING
YOUR
VEHICLE
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING
AND CARE
TECHNICAL
SPECIFICATIONS
CONTENTS
– blade replacement ....................... 230
– rear window washer fluid
specifications ................................. 252
Reconfigurable multifunctional
display ................................................. 24
– control buttons ............................ 25
– setup menu ................................... 26
– standard screen ............................ 24
Regular checks .................................... 216
Remote control .................................. 6
– additional remote controls ........ 8
– battery replacement .................... 7
– opening/closing doors
remotely ........................................ 6
– opening the tail gate .................... 6
Replacing battery of key with
remote control ................................. 7
Rev counter ......................................... 15
Reverse light
– bulb replacement ......................... 194
Right hand drive version ................... 265
Roof bar attachments ........................ 99
Roof rack/ski rack (capacity for) ..... 99
Rubber tubes ....................................... 229
Safety ................................................... 129
Satellite navigation socket ................. 124
SBR system .......................................... 130
Scheduled servicing plan ......... 212-214
Scrappage ............................................. 255
Seat belt pretensioners ..................... 131
– load limiters .................................. 131
Seat belts .............................................. 129
– carrying children safely ............... 134– general information ..................... 132
– load limiters .................................. 131
– maintenance .................................. 225
– pretensioners ................................ 131
– SBR ................................................. 130
– using the seat belts ...................... 129
Seat heating .......................................... 41
Servicing and care......................... 211
– checking fluid levels ..................... 217
– heavy-duty use of the car ........... 216
– regular checks .............................. 216
– scheduled servicing plan..... 212-214
Setting the clock ..........................21-30
Side bags
–
side bag / window bag ... 144-145-146
– general information ..................... 147
Side lights/taillights
– front bulb replacement ............... 189
– rear bulb replacement ................ 193
– switching on .................................. 61
Smart washing
(windscreen wipers) ........................ 64
Snow chains ......................................... 159
Sockets .................................................. 80
Spare wheel ......................................... 176
– technical specifications ............... 244
Spark plugs (type) .....................238-239
Speedometer ....................................... 15
– standard screen ............................ 23
Start&Stop system .............................. 115
Starting and driving...................... 149
Starting the engine ............................. 149
– emergency starting ...................... 175
– ignition switch .............................. 11
– procedure for diesel versions.... 150– procedure for petrol versions .... 149
– stopping the engine ..................... 151
– warming the engine ..................... 151
Steering lock ........................................ 12
Steering system
– technical specifications ............... 241
–
steering wheel adjustment lever.... 43
Steering wheel
– adjustment lever .......................... 43
– turning circle ................................. 241
Steering wheel stalks ................... 61-63
Stereo (wiring)..................................... 122
Storage compartments ...................... 74
Sun visors ............................................. 79
Suspensions .......................................... 241
Switching ceiling lights on/off ........... 68
Symbols ................................................. 4
Tail gate
– emergency unlocking from
the inside ....................................... 94
– unlocking with remote control .. 6
Technical specifications.............. 235
Third brake light ................................. 194
Topping up engine oil ........................ 220
– specifications ................................. .251
Tow hook
– installing ........................................ 207
Towing the car .................................... 208
Towing trailers .................................... 156
Trailer (towing) ................................... 156
– installing the tow hook ............... 157
Transmission
– technical specifications ............... 240
Trip computer ..................................... 37
259-268 PUNTO FL EN 4ed 18-01-2010 12:29 Pagina 263