wiring FIAT SEICENTO 2008 1.G Clarion PU2312 Manual

20
7. IN CASE OF DIFFICULTY
English
Power does not turn on.
(No sound is produced).
Ccompact disc cannot be loaded.
Sound skips or is noisy.
Sound is bad directly after
powwer is turned on.
Nothing happens when
buttons are pressed
Display is not accurate.Replace with a fuse of the same amperage.
If the fuse blows again, consult your store
of purchase.
Consult your store of purchase.
Eject the compact disc before loading the new one.
Clean the compact disc with a soft cloth.
Replace with a compact disc with no scratches.
Let dry for about 1 hour with the power on.
Turn off the power, then press the Release button 1
and remove the DCP.
Press the reset button for about 2 seconds with a thin
rod.
Wipe the dirt off with a soft cloth moistened
with cleaning alcohol. Problems Cause Solution
Fuse is blown.
Incorrect wiring.
Another compact disc is already
loaded.
Compact disc is dirty.
Compact disc is heaviiy
scratched or warped.
Water droplets may form on the
internal lens when the car is
parked in a humid place.
The microprocessor has mal-
functioned due to noise, etc.
DCP or main unit connectors
are dirty.
Reset button
PU2312 007-021 GB 14-01-2008 14:58 Pagina 20