clock setting FORD AEROSTAR 1996 1.G Owners Manual

152
*
[AS01100(ALL)08/95]
q
Using the ªSCAN/TUNEº button to scan
radio stations
[AS01150(ALL)08/95]
Pressing the ªSCAN/TUNEº button once
enters the scan mode (display will indicate
ªSCNº). Pushing the top (
a) half of the
ªSEEKº button will begin the scan mode up
the frequency band, stopping on each
listenable station for approximately five
seconds. Pushing the bottom (
b) half of the
ªSEEKº button will begin the scan mode
down the frequency band, again stopping on
each listenable station for approximately five
seconds.
*
[AS01200(ALL)08/95]
To stop the scan mode on the presently
sampled station press the ªSCAN/TUNEº
button again.
*
[AS01250(ALL)08/95]
q
Setting the Station Memory Preset buttons
%*
[AS01300(ALL)08/95]
Your radio is equipped with 5 station
memory buttons. These buttons can be used
to select up to 5 preset AM stations and 10
FM stations (5 in FM1 and 5 in FM2). Follow
the easy steps below to set these buttons to
the desired frequencies.
*
[AS01350(ALL)08/95]
1. Select a band, then select a frequency.
*
[AS01400(ALL)08/95]
2. Press one of the memory preset buttons and
hold the button until the sound returns. That
station is now held in memory on that
button.
*
[AS01450(ALL)08/95]
3. Follow the two steps above for each station
memory preset button you want to set.
*
[AS01500(ALL)08/95]
NOTE: If the vehicle's battery is disconnected,
the clock and station memory preset
buttons (if programmed in auto mode)
will need to be reset.
File:09cpasa.ex
Update:Tue Aug 29 17:42:51 1995