compression ratio FORD CONTOUR 1998 2.G SVT Supplement Manual

ENGINE
ConfigurationTransversely mounted, 60-degree V6, cast
aluminum block and heads, iron cylinder
liners, fully counterweighted forged crankshaft.
Bore x Stroke3.24 in (8.23 cm) x 3.11 in (7.90 cm)
Displacement2,544 cc / 155 cid
Compression ratio10.0:1
Horsepower145 kW @ 6,625 rpm
(195 HP @ 6,625 rpm)
Torque224 Nm @ 5,625 rpm
(165 ft-lb @5,625 rpm)
Redline6,750 rpm (fuel shut-off at 7,000 rpm)
Specific output77 HP per litre
ValvetrainDual overhead chain-driven cams, roller finger
followers with hydraulic lash adjustment,
ovate-wire valve springs, four valves per
cylinder.
Intake valves2 per cylinder, 32 mm head diameter
Exhaust valves2 per cylinder, 26 mm head diameter
Fuel systemSequential electronic fuel injection, 19 lb/hr.
injectors, 379 kPa (55 psi)
Intake manifoldUnique airflow-tuned upper intake, cast
aluminum plenum chamber, extrude-hone
internal surfaces
Throttle body6.0 cm (2.36 in) bore
Air-mass sensor7.0 cm (2.75 in) diameter
Exhaust manifoldsSteel tube (clamshell design)
Exhaust system5.72 cm (2.25 in), stainless steel,
6.35 cm (2.5 in) polished stainless steel tips
SVT Contour Specifications
12