four wheel drive FORD CONTOUR 2000 2.G SVT Supplement Manual

Item Description
ConfigurationTransversely mounted, 60-degree
V6, cast aluminum block and
heads, iron cylinder liners, fully
counterweighted forged
crankshaft, crankshaft windage
tray, lightened flywheel, structural
aluminum-alloy oil pan
Bore x Stroke82.4 x 79.0 mm (3.24 x 3.11 in)
Displacement2 544 cc/155 cid
Compression ratio10.0:1
Horsepower (SAE net)149 kW (200 hp) @ 6 600 rpm
Torque226 Nm (167 lb/ft @ 5 500 rpm)
Redline6 750 rpm (fuel shut-off at
7 000 rpm)
Specific output78.6 hp per liter
ValvetrainDual overhead chain-driven cams,
roller finger followers with
hydraulic lash adjustment,
ovate-wire valve springs, four
valves per cylinder. The Extrude
Honeyprocess is used on the
primary and secondary ports
Fuel systemSequential electronic fuel injection,
19 lb/hr injectors, 379 kPa (55 psi)
Mass air sensor70 mm (2.76 in) diameter
Throttle body60 mm (2.36 in) diameter bore
Port throttlesElectronically actuated 32 mm
(1.26 in) diameter bore-open at
3 250 rpm
Exhaust manifoldsSteel tube clamshell design
Exhaust system57 mm (2.25 in) diameter with
63.5 mm (2.50 in) polished
stainless steel tips
Engine/Transmission
8