trunk FORD CROWN VICTORIA 2000 2.G User Guide

FORD CROWN VICTORIA 2000 2.G User Guide CROWN VICTORIA 2000 2.G FORD FORD https://www.carmanualsonline.info/img/11/4776/w960_4776-0.png FORD CROWN VICTORIA 2000 2.G User Guide

Page 89 of 224

FORD CROWN VICTORIA 2000 2.G User Guide Erasing personal code
To erase all of the personal entry codes programmed to a vehicle:
1. Enter the factory-set code.
2. Press 1/2 within 5 seconds of
step 1.
3. Press and hold 1/2 for two
seconds. A

Page 90 of 224

FORD CROWN VICTORIA 2000 2.G User Guide Locking doors with the keyless entry system
It is not necessary to enter the factory-set code prior to locking all doors.
To lock the doors:
Press 7/8 and 9/0 at the same time.
INTERIOR LUGGAGE COMPAR

Page 91 of 224

FORD CROWN VICTORIA 2000 2.G User Guide Keep vehicle doors and
luggage compartment
locked and keep keys out of a
child’s reach. Unsupervised
children could lock themselves in
an open trunk and risk injury.
Children should be taught not to

Page 119 of 224

FORD CROWN VICTORIA 2000 2.G User Guide 2. Make sure the headlamps and vehicle accessories are off.
3. Make sure the parking brake is
set.
4. Make sure the gearshift is in P
(Park).
5. Turn the key to 4 (ON) without
turning the key to 5 (ST

Page 127 of 224

FORD CROWN VICTORIA 2000 2.G User Guide AIR SUSPENSION SYSTEM (IF EQUIPPED)
The air suspension system is designed to improve ride, handling and
general vehicle performance during:
•certain road conditions
•steering maneuvers
•braking

Page 139 of 224

FORD CROWN VICTORIA 2000 2.G User Guide The fuel pump shut-off switch is
located on the left side of the trunk
behind the trunk liner.
Use the following procedure to reset the fuel pump shut-off switch.
1. Turn the ignition to the OFF posit

Page 143 of 224

FORD CROWN VICTORIA 2000 2.G User Guide The high-current fuses are coded as follows.
Fuse/Relay
LocationFuse Amp
RatingPower Distribution Box Description
1 20A* Electric Fuel Pump Relay
2 30A* Generator, Starter Relay, Fuses 15 and 18
3 25A

Page 192 of 224

FORD CROWN VICTORIA 2000 2.G User Guide 1. Open the trunk and carefully pull
the carpet away to expose the
plastic retainer.
2. Remove plastic retainer to expose
the lamp assembly hardware.
3. Remove three nut and washer
assemblies and the

Page 193 of 224

FORD CROWN VICTORIA 2000 2.G User Guide Replacing license plate lamp bulbs
1. Remove two screws, grommets
and the license plate lamp assembly
from the trunk lid.
2. Carefully pull the bulb from the
socket and push in the new bulb.
3. Instal

Page 222 of 224

FORD CROWN VICTORIA 2000 2.G User Guide anti-lock brakes (ABS) .....11,123
brake ..........................................11
charging system ........................12
check engine ...............................9
high beam ...............
Page:   < prev 1-10 11-20 21-30 next >