FORD CROWN VICTORIA 2000 2.G Workshop Manual

FORD CROWN VICTORIA 2000 2.G Workshop Manual CROWN VICTORIA 2000 2.G FORD FORD https://www.carmanualsonline.info/img/11/4776/w960_4776-0.png FORD CROWN VICTORIA 2000 2.G Workshop Manual
Trending: ignition, tow bar, high beam, oil pressure, clock, coolant, cruise control

Page 51 of 224

FORD CROWN VICTORIA 2000 2.G Workshop Manual Turn the control to raise or lower
volume.
If the volume is set above a certain level and the ignition is turned off,
the volume will come back on at a “nominal” listening level when the
ignition

Page 52 of 224

FORD CROWN VICTORIA 2000 2.G Workshop Manual Tune adjust for CD changer
•Press
to select the previous
disc in the CD changer. (Play will
begin on the first track of the
disc unless the CD changer is in shuffle mode.) Refer toShuffle
featurefor

Page 53 of 224

FORD CROWN VICTORIA 2000 2.G Workshop Manual Scan function
The scan function works in radio,
tape or CD mode (if equipped).
Scan function in radio mode
Press the SCAN control to hear a brief sampling of all listenable stations
on the frequency b

Page 54 of 224

FORD CROWN VICTORIA 2000 2.G Workshop Manual Autoset memory preset
Autoset allows you to set strong radio stations without losing your
original manually set preset stations. This feature is helpful on trips
when you travel between cities with di

Page 55 of 224

FORD CROWN VICTORIA 2000 2.G Workshop Manual Speaker balance adjust
Speaker sound distribution can be
adjusted between the right and left
speakers.
Press the BAL control. Use the SEL
control to adjust the sound between
the speakers.
Speaker fade

Page 56 of 224

FORD CROWN VICTORIA 2000 2.G Workshop Manual •In CD mode, pressing the REW control for less than three seconds
results in slow rewind. Pressing the control for more than three
seconds results in fast rewind.
Fast forward
The fast forward contr

Page 57 of 224

FORD CROWN VICTORIA 2000 2.G Workshop Manual Compression feature
Compression adjust brings soft and
loud CD passages together for a
more consistent listening level.
Press the COMP control to activate
and deactivate compression adjust.
The effect

Page 58 of 224

FORD CROWN VICTORIA 2000 2.G Workshop Manual Press and hold the control for five seconds to turn the feature on or off.
Press the control to scroll through the following selections:
Traffic
•Press the RDS control until
TRAFFIC is displayed.

Page 59 of 224

FORD CROWN VICTORIA 2000 2.G Workshop Manual Show
•With RDS activated, press the
RDS control until SHOW is
displayed.
•Use the SEL control to select
TYPE (the display shows the
program type), NAME (the
display shows the call letters of
the s

Page 60 of 224

FORD CROWN VICTORIA 2000 2.G Workshop Manual 2. Pressto eject the magazine.
3. Turn the magazine (A) over.
4. Using the disc holder release
knob (C), pull the disc holder (B)
out of the magazine.
If you pull too hard on the disc holder, the disc
Trending: trailer, battery location, tires, brake light, load capacity, jump start, check engine