air condition FORD E SERIES 1996 4.G User Guide

291 %
*
[SV09435( ALL)05/95]
Fuel quality
*
[SV09450( ALL)06/95]
If you are experiencing starting, rough idle or
hesitation problems when the engine is cold, it
may be caused by fuel with low volatility. Try a
different brand of fuel. If the condition persists,
see your dealer or a qualified service technician.
*
[SV09452( ALL)06/95]
Using a high-quality fuel makes your vehicle
more responsive and maintains its good fuel
economy and emissions by:
*
[SV09455( ALL)06/95]
q
protecting your fuel system from rusting.
*
[SV09460( ALL)06/95]
q
preventing the fuel lines from freezing.
*
[SV09465( ALL)06/95]
q
improving vehicle starting and warm-up.
*
[SV09470( ALL)06/95]
q
protecting the fuel system from vapor lock in
very hot weather, which causes the engine to
hesitate or stall and makes restarts difficult.
*
[SV09475( ALL)06/95]
q
minimizing deposits in fuel injectors,
combustion chambers, and on intake valves.
*
[SV09480( ALL)06/95]
q
preventing your fuel system from ªgumming
upº when your vehicle is not used for long
periods of time.
*
[SV09485( ALL)06/95]
q
preventing your engine from knocking and
pinging.
*
[SV09500( ALL)06/95]
It should not be necessary to add any
aftermarket products to your fuel tank if you
continue to use a high-quality fuel.
%*
[SV09875( ALL)04/95]
Gasolines for clean air
*
[SV09900( ALL)06/95]
Fuels in certain areas of the country are required
to contain oxygenates to improve air quality.
Common oxygenates are ethanol or grain alcohol
(blended at no more than 10%), methanol or
wood alcohol (blended at no more than 5% with
cosolvents and additives), and MTBE or methyl
tertiary butyl ether (blended at no more than
15%).
File:14ltsve.ex
Update:Wed Apr 17 08:40:13 1996

351 %
*
[SV51456( ALL)06/95]
Readiness for Inspection/Maintenance
Testing
*
[SV51457( ALL)06/95]
In some localities it may become a legal
requirement to pass an
Inspection/Maintenance (I/M) test of the
On-Board Diagnostic (OBD) II system. If the
vehicle's powertrain system or its battery has
just been serviced, the OBD II system is reset to
a not ready for I/M testing condition. To
prepare for I/M testing, the law specifies a
ªneed for additional mixed city and highway
driving to complete the checkº of the OBD II
system. As soon as all of the OBD II system
checks are successfully completed, the OBD II
system is set to the ready condition. The amount
of driving required to reach the ready condition
varies with individual driving patterns. To
complete this requirement in the minimum
amount of time, refer to the OBD II Drive Cycle
defined below. If the vehicle owner cannot or
does not want to do the additional driving
required by law, a service center can perform
this drive cycle as it would any other type of
repair work.
[SV51458( ALL)05/95]
OBD II Drive Cycle
*
[SV51459( ALL)05/95]
The engine must be warmed up and at
operating temperature before proceeding with
the drive modes of the following OBD II Drive
Cycle.
*
[SV51461( ALL)05/95]
1. Start the engine. Drive or idle (in neutral)
the vehicle for 4 minutes.
[SV51463( ALL)04/95]
2. Idle the vehicle in drive (neutral for manual
transmission) for 40 seconds.
*
[SV51465( ALL)06/95]
3. Accelerate the vehicle to 45 mph (70 km/h)
at 1/4 to 1/2 throttle for 10 seconds.
File:14ltsve.ex
Update:Wed Apr 17 08:40:13 1996

Index 381
Cleaning your vehicle (continued)
rustproofing.............. 10
safety belts............... 28
tail lamps............... 93
upholstery and interior trim...... 141
washing................ 9
wheels................ 319
Climate control system
air conditioning............ 87
heating................ 87
heating onlsystem............ 83
heating only system........... 83
Clock.............156, 173, 189
Cold engine starting............ 59
Combination lap and shoulder belts . . 11, 14
Compact disc player
(see Electronic sound system) . . . 150, 156
Compact disc radio
(see Electronic sound system)..... 150
Console, description........... 147
Controls
instrument panel............ 81
mirrors.............143, 146
power seat.............. 140
steering column............ 99
Coolant (see Engine coolant)....... 301
checking and adding......... 301
drain and flush............ 306
preparing for storage......... 362
proper solution............ 303
refill capacities............ 353
specifications............. 305
temperature gauge........... 78
Cooling fan............... 280
Crankcase emission filter......... 356
Cruise control (see Speed control).... 106
Customer Assistance Center, Ford (U.S.). . 261
Customer Assistance Centre,
Ford of Canada..........261, 268
File:ltixe.ex
Update:Wed Apr 17 08:36:26 1996

386 Index
Gauges, Mechanical
battery voltage gauge.......... 75
charging system gauge......... 75
engine coolant temperature gauge.... 78
engine oil pressure gauge........ 76
fuel gauge............... 77
speedometer.............. 79
GAWR (Gross Axle Weight Rating)
calculating.............. 225
definition.............218, 223
driving with a heavy load....... 218
Gearshift
automatic operation........195, 200
column-mounted.........195, 200
locking the gearshift........... 55
positions.............195, 200
shifting the gears.........195, 200
shift-lock........... 60,196, 202
Gearshift:shifting the gears......195, 200
GVWR (Gross Vehicle Weight Rating)
calculating.............. 225
definition.............218, 223
driving with a heavy load....... 218
H
Hazard flashers............. 103
Headlamps
aiming................ 340
checking alignment.......... 340
cleaning................ 93
daytime running lights......... 93
flashing............... 101
high beam.............. 100
replacing bulbs..........340±341
turning on and off........... 92
warning chime............. 77
Heating
heating and air conditioning system . . . 87
File:ltixe.ex
Update:Wed Apr 17 08:36:26 1996