FORD E SERIES 1996 4.G Repair Manual
E SERIES 1996 4.G
FORD
FORD
https://www.carmanualsonline.info/img/11/4788/w960_4788-0.png
FORD E SERIES 1996 4.G Repair Manual
Page 127 of 388
126 [FV27901( E )12/91]
one third page art:0020224-CReclining bucket seat
%*
[FV31201( E )12/91]
Quick Release Rear Captain Chairs
[FV31301( E )12/91]
Second row
*
[FV31400( E )12/91]
To remove:
[FV31700( E )12/91]
1. Disengage the lap/shoulder safety belt from
the seat by inserting a key or similar device
into the slot in the detachable anchor and
lifting upward. Stow the tongue end of the
detachable anchor as shown.
[FV31901( E )02/92]
2. Pull the seat latch handle, located on the
right hand side of the seat base, and pull
seat toward the right hand side of vehicle to
disengage four pins from the floor mount.
[FV32001( E )12/91]
one third page art:0020915-A
Removing the quick release rear captains chair
File:08ltfve.ex
Update:Wed Apr 17 08:47:13 1996
Page 128 of 388
![FORD E SERIES 1996 4.G Repair Manual 127 [FV32101( E )12/91]
3. Remove the seat from the vehicle.
*
[FV32200( E )12/91]
To install the rear bucket seat:
[FV32400( E )12/91]
1. Lift the seat assembly into the vehicle and
position the seat FORD E SERIES 1996 4.G Repair Manual 127 [FV32101( E )12/91]
3. Remove the seat from the vehicle.
*
[FV32200( E )12/91]
To install the rear bucket seat:
[FV32400( E )12/91]
1. Lift the seat assembly into the vehicle and
position the seat](/img/11/4788/w960_4788-127.png)
127 [FV32101( E )12/91]
3. Remove the seat from the vehicle.
*
[FV32200( E )12/91]
To install the rear bucket seat:
[FV32400( E )12/91]
1. Lift the seat assembly into the vehicle and
position the seat to the floor mount.
[FV32600( E )02/92]
2. Engage the four seat pins into their
respective floor mount holes and push the
seat toward the left hand side of the vehicle
to fully engage.
[FV32700( E )02/92]
one third page art:0020916-B
Installing the quick release rear captains chair
[FV33001( E )12/91]
3. Push the seat latch handle downward to a
full stop. This locks the seat in position.
[FV33101( E )12/91]
4. Before you engage the safety belt, be sure it
is not twisted. Remove any twist, then insert
the tongue end of the detachable anchor into
the detachable anchor until you hear a
ªsnapº and feel the latch engage.
*
[FV33201( E )05/95]
RWARNING
Check to see that the seat is latched
securely in position. Keep floor area free
of objects that would prevent proper seat
engagement. Never attempt to adjust the
seat latch while the vehicle is in motion.
File:08ltfve.ex
Update:Wed Apr 17 08:47:13 1996
Page 129 of 388
128 [FV33400( E )12/91]
three fourths page art:0020783-B
File:08ltfve.ex
Update:Wed Apr 17 08:47:13 1996
Page 130 of 388
129 [FV33501( E )05/95]
two third page art:0020856-C
Rear seat shoulder safety belt Ð stowage (with seat
removed)
% [FV36101( E )02/92]
Quick Release Rear Passenger Seat
Assembly
% [FV36201( E )02/95]
Three Passenger and Four Passenger Bench
and Bed Seats
[FV36300( E )01/89]
To remove the seat assembly:
*
[FV36400( E )06/92]
1. Disengage the lap/shoulder safety belt from
the seat by inserting a key or screwdriver
into the slot in the detachable anchor and
lifting upward. Stow the tongue end of the
detachable anchor as shown in the
illustration.
File:08ltfve.ex
Update:Wed Apr 17 08:47:13 1996
Page 131 of 388
130 [FV36500( E )05/91]
three fourths page art:0020783-BLocation of the detachable anchor warning label on safety
belt
File:08ltfve.ex
Update:Wed Apr 17 08:47:13 1996
Page 132 of 388
131 [FV36600( E )05/95]
two third page art:0020856-C
Rear seat shoulder safety belt Ð stowage (with seat
removed)
File:08ltfve.ex
Update:Wed Apr 17 08:47:13 1996
Page 133 of 388
132 [FV36700( E )05/95]
three fourths page art:0020784-CLocation of the stowage hook caution label on safety belt
File:08ltfve.ex
Update:Wed Apr 17 08:47:13 1996
Page 134 of 388
133 [FV36801( E )05/95]
two third page art:0020857-B
Rear seat shoulder safety belt Ð stowage (with seat
removed)
[FV36900( E )03/91]
2. Lift and rotate the LH/RH seat latch handles
rearward.
[FV37000( E )06/92]
3. Lift the LH/RH latch rod hook ends out of
the locking holes in the front strikers.
[FV37101( E )06/92]
4. Move (slide) the seat rearward and lift the
seat's rear stanchion hooks away from the
rear latch strikers in the floor prior to lifting
the front stanchion hooks out from the front
latch strikers in the floor. Refer to the
illustration.
[FV37201( E )03/91]
5. Remove the seat assembly from vehicle.
File:08ltfve.ex
Update:Wed Apr 17 08:47:13 1996
Page 136 of 388
135 [FV37901( E )02/92]
two third page art:0020231-C
Quick seat release Ð bench seat
File:08ltfve.ex
Update:Wed Apr 17 08:47:13 1996
Page 137 of 388
136 [FV38001( E )02/92]
two third page art:0020917-BQuick seat release Ð bed seat
[FV38101( E )01/89]
RWARNING
Keep striker area free of foreign objects
that would prevent front and rear
retainers from engaging the strikers
properly.
*
[FV38201( E )05/93]
RWARNING
Before using the seat, make sure that the
latch hooks are securely locked around the
floor pins.
File:08ltfve.ex
Update:Wed Apr 17 08:47:13 1996