TPMS FORD E SERIES 2008 4.G User Guide

FORD E SERIES 2008 4.G User Guide E SERIES 2008 4.G FORD FORD https://www.carmanualsonline.info/img/11/4812/w960_4812-0.png FORD E SERIES 2008 4.G User Guide

Page 139 of 280

FORD E SERIES 2008 4.G User Guide 3. Press and hold the brake pedal for two (2) seconds, then release.
4. Turn the ignition to OFF/LOCK (DO NOTremove the key.)
5. Cycle the ignition from OFF/LOCK to RUN three (3) times ending in
RUN.D

Page 140 of 280

FORD E SERIES 2008 4.G User Guide 1.Left front tire:Place the TPMS reset tool against the left front tire
where the tire meets the rim, opposite from the valve stem (1) as shown.
This is where the sensor is located inside the rim.
The

Page 141 of 280

FORD E SERIES 2008 4.G User Guide Rotation, pressure adjustment and TPMS reset example
The following example describes all the major steps involved in rotating
tires on a vehicle with different front and rear tire pressures. It
illust

Page 142 of 280

FORD E SERIES 2008 4.G User Guide Sensor position following tire
rotation
Sensor 1: 50 psi
Sensor 2: 50 psi
Sensor 3: 80 psi
Sensor 4: 80 psi
Pressure adjustment without the
required TPMS reset procedure
Sensor 1: 80 psi
Sensor 2: 80

Page 143 of 280

FORD E SERIES 2008 4.G User Guide Rotation, pressure adjustment
and successful completion of the
TPMS reset procedure
Sensor 1: 80 psi
Sensor 2: 80 psi
Sensor 3: 50 psi
Sensor 4: 50 psi
Tire rotation and air pressure
adjustment follow

Page 198 of 280

FORD E SERIES 2008 4.G User Guide CHANGING THE TIRES
If you get a flat tire while driving, do not apply the brake heavily.
Instead, gradually decrease your speed. Hold the steering wheel firmly
and slowly move to a safe place on the s

Page 278 of 280

FORD E SERIES 2008 4.G User Guide Belt-Minder.............................81
extension assembly ..................85
for adults .............................77–79
for children .........................95–96
safety belt maintenanc
Page:   < prev 1-10 11-20