TPMS FORD E SERIES 2012 4.G User Guide

FORD E SERIES 2012 4.G User Guide E SERIES 2012 4.G FORD FORD https://www.carmanualsonline.info/img/11/4819/w960_4819-0.png FORD E SERIES 2012 4.G User Guide

Page 163 of 335

FORD E SERIES 2012 4.G User Guide 3. Cycle the ignition to the on
position with the engine off.
4. Turn the hazard flashers on then
off three times. This must be
accomplished within 10 seconds.
If the reset mode has been entered succe

Page 164 of 335

FORD E SERIES 2012 4.G User Guide 8. Remove the valve cap from the valve stem on the right rear tire;
decrease the air pressure until the horn sounds.
9. Remove the valve cap from the valve stem on the left rear tire;
decrease the air

Page 225 of 335

FORD E SERIES 2012 4.G User Guide Fuse/Relay
LocationFuse Amp
RatingProtected Circuits
72 20A** Cigar lighter
73 — Not used
74 30A** Power seat
75 20A* Vehicle power (VPWR) 1, PCM
power
76 20A* VPWR 2, PCM – emission related
power

Page 226 of 335

FORD E SERIES 2012 4.G User Guide WARNING:The use of tire sealants may damage your tire
pressure monitoring system (TPMS) and should not be used.
However, if you must use a sealant, the TPMS sensor and valve stem
on the wheel must be

Page 334 of 335

FORD E SERIES 2012 4.G User Guide replacing the batteries .............82
Reverse sensing system ...........208
Roadside assistance ..................214
Roll stability control .................192
S
Safety belts (see Safety
restraint
Page:   < prev 1-10 11-20