USB port FORD ESCAPE HYBRID 2010 2.G Quick Reference Guide

You can use the following remote
controls to help make SYNCmenu
selections:
•Use the cursor controls
(
///) to make menu
selections.
Note:For some menus,
/
cursor controls are active and for
others,
/cursor controls
are active
•Press ENTER to confirm a
selection.
•Press
/to
reverse/advance to the next track.
Note:Once SYNC USB is chosen, SYNCwill begin indexing your media
information. Depending on how much supported media content there is,
this process may take a few minutes. You can, however, choose to
activate the Autoplay feature which will begin playing the first song as
soon as possible so that you will not have to wait until all of the music is
indexed prior to playing.
Media menu
Once you have chosen a SYNCmedia source from which to play, a
media screen similar to the one shown below will be displayed. From this
screen, you can then make selections through the Media Menu.
DVD interaction
70SeeEnd User License Agreementat the end of this book
2010 SYNC/MGM(mgm)
Supplement, 2nd Printing
USA(fus)

Playlists:The Playlist screen allows you to view and select from any
previously saved playlists on your playing device. Press the cursor
controls (
///) to highlight the desired choice and press
ENTER.
Tracks:The Track screen lists all tracks in your playing device
alphabetically. Use the scroll bar to advance/reverse in the list. Select to
begin play.
Explore USB :The Explore USB screen allows you to scroll through all
supported media content stored on your device. Press the cursor
controls (
///) to highlight the desired choice and press
ENTER.
Similar MusicThe Similar Music screen allows you to play music similar
to what is currently playing from the USB port. The system will use the
metadata information of each song to compile a playlist for you.
Select source menu
The SYNCselect source menu screen allows you to choose which
SYNCmedia source to access.
•From the main screen, select
‘Menu’.
•Choose ‘Select Source’.
DVD interaction
73SeeEnd User License Agreementat the end of this book
2010 SYNC/MGM(mgm)
Supplement, 2nd Printing
USA(fus)

Choose from:
•USB:Select to access any
supported device plugged into the
USB port.
•Bluetooth Stereo:Select to
stream audio from yourBluetooth
stereo enabled device over the
vehicle’s speakers.
•Line In:Select to access any
playing device plugged into the Auxiliary input jack (Line in).
Media settings
The Media Settings screen allows you to turn Shuffle, Repeat and
Autoplay on/off. To access:
•From the main screen, select
‘Menu’.
•Select ‘Media Settings’.
DVD interaction
74SeeEnd User License Agreementat the end of this book
2010 SYNC/MGM(mgm)
Supplement, 2nd Printing
USA(fus)

GLOSSARY OF TERMS
Autoplay:With Autoplay turned ON, SYNCallows you to listen to
music which has already been randomly indexed during the indexing
process. With Autoplay turned off, the chosen music will not begin to
play until all of the music has been indexed by SYNC. Depending on the
size of the material, this may take a few minutes.
Bluetooth enabled cellular phone:Any cellular phone which has the
Bluetoothwireless technology which will enable the phone to connect
with SYNCand exchange information wirelessly.
Digital media player / USB Device:This is a generic term used to
signify any of the following media devices: iPod, Zune™, “Plays from
device” players, and most USB drives (thumb drives, flash drives, PEN
drives, etc.)
Discoverable mode:A mode which allows otherBluetoothenabled
devices to find yourBluetoothenabled device.
Discovery mode:A mode which allows yourBluetoothenabled device
to search for other ‘discoverable’Bluetoothenabled devices.
In-band ringing:This is a phone dependent feature. If yourBluetooth
enabled cellular phone supports this feature, SYNCcan play your ring
tone during incoming calls.
Indexing:A process in which SYNCbuilds a voice recognition grammar
for the media content of your digital media player. While indexing,
SYNCwill play already indexed media if Autoplay is on. However, voice
recognition is not available for the media until the indexing process is
complete.
Metadata:Descriptive tags embedded in your digital media which provide
SYNCwith information such as ARTIST, ALBUM, GENRE and TRACK.
Pairing:To use yourBluetoothenabled cellular phone with SYNC, you
must go through a pairing (bonding) process. “Pairing” is a special
process used when two devices connect for the first time. The pairing
process is used to generate a link key that is used for authentication
purposes during subsequentBluetoothconnections between the two
devices.
PIN (Personal Identification number):This six digit number
(sometimes referred to as a passkey) will be shown in the radio display
during the pairing process with yourBluetoothenabled device. You do
not need to write down this number as it will only be used for that
specific pairing procedure.
Glossary
76SeeEnd User License Agreementat the end of this book
2010 SYNC/MGM(mgm)
Supplement, 2nd Printing
USA(fus)

911 assist™ .................................31
A
Accessing and using your USB
port ..............................................48
Accessing call history/phone
book during active call ...............19
Accessing system settings .........52
Accessing vehicle applications ..52
Accessing your phone book .......21
Accessing your playlists .............63
Active call menu options ...........17
Adding a Bluetooth media
device which is in discoverable
mode ............................................54
Adding a Bluetooth media
device which is in discovery
mode ............................................53
Adding (pairing) a phone ..........37
Answering an incoming call .......15
Applications .................................36
Automatically download your
phone book ..................................28
C
Call history ..................................20
Changing the SYNClanguage
setting ....................................41, 57
Connecting a Bluetooth media
device ...........................................55
Connecting a digital media
player to SYNC.........................47
Connecting a phone ....................39
D
Delete a device ...........................56Deleting a phone .........................40
Deleting all phones .....................40
Deleting all text messages .........24
Downloading unread text
messages ......................................24
E
End user license agreement ......77
Ending a call ...............................15
Exiting phone mode ...................15
Exploring the USB device ..........65
H
How SYNCinteracts with
your Bluetooth device ................19
I
Incoming new text message ......16
Installing new vehicle
applications ...........................43, 59
J
Joining two calls
(multiparty/conference call) ......18
M
Making a call ...............................14
Message notification ...................26
Modifying your phone book .......27
P
Pairing media devices to
SYNC....................................53–54
Index
84
2010 SYNC/MGM(mgm)
Supplement, 2nd Printing
USA(fus)