steering FORD ESCORT 1996 7.G User Guide

163
%*
[SC05600(ALL)01/95]
Horn
*
[SC05800(ALL)03/94]
To sound the horn, push the pad in the center of
the steering wheel. Check the horn regularly to
be sure it operates properly.
[SC05850(ALL)04/94]
one third page art:0070184-C
The horn located on the steering wheel
*
[SC06275(ALL)10/91]
Tilt Steering Column
(If equipped)
*
[SC06325(ALL)02/95]
RWARNING
Never adjust the steering wheel when the
vehicle is moving. You could lose control
of the vehicle and injure someone.
File:07ctsce.ex
Update:Tue Sep 19 14:47:40 1995

164 [SC06350(ALL)06/94]
half page art:0070034-EThe lever to tilt the steering column
*
[SC06400(ALL)09/95]
To change the position of the steering wheel,
push the release lever under the steering column
away from you. Tip the steering wheel to the
desired position. Pull the lever back into place to
lock the steering wheel.
%
*
[SC07400(ALL)03/91]
Speed Control (If equipped)
*
[SC07500(ALL)06/95]
If your vehicle has speed control, you can
automatically maintain a constant speed at or
above 30 mph (50 km/h).
*
[SC07510(ALL)06/95]
Use of radio transmitting equipment that is not
Federal Communications Commission (FCC) or
in Canada the Canadian Radio and
Telecommunications Commission (CRTC)
approved may cause the speed control to
malfunction. Therefore, use only properly
installed FCC (CRTC in Canada) approved radio
transmitting equipment in your vehicle.
File:07ctsce.ex
Update:Tue Sep 19 14:47:40 1995

165 [SC07525(ALL)08/95]
one third page art:0070176-B
The speed control switches on the steering wheel
[SC08300(ALL)08/95]
To set the speed control
[SC08400(ALL)08/95]
half page art:0070277-AFile:07ctsce.ex
Update:Tue Sep 19 14:47:40 1995

224 %
*
[DR03800(ALL)01/95]
Putting Your Vehicle in Gear
*
[DR04001(ALL)05/95]
RWARNING
Hold the brake pedal down while you
move the gearshift lever from position to
position. If you do not hold the brake
pedal down, your vehicle may move
unexpectedly and injure someone.
*
[DR04025(ALL)07/93]
Using a Console-Mounted Gearshift
[DR04050(ALL)08/95]
Since your vehicle has a console-mounted
gearshift, you must depress the brake pedal,
then push in the thumb button to move the
gearshift to the position you choose.
*
[DR04900(ALL)11/94]
Once the gearshift is secure in the desired
position, release the brake pedal and use the
accelerator as necessary.
[DR04950(ALL)06/94]
one third page art:0070193-C
The automatic console-mounted gearshift lever
[DR05010(ALL)08/95]
To move the gearshift out of P (Park), the
ignition must be turned to the ON position and
the brake pedal must be depressed. When the
gearshift is in any other position except P (Park),
the ignition key cannot be turned to LOCK or be
removed from the steering column. To remove
the key, the gearshiftmustbe in P (Park).
File:10ctdre.ex
Update:Tue Sep 19 14:53:34 1995

232 [DR10200(ALL)02/92]Do not attempt to shift into 1 (First) gear with
the clutch pedal depressed at speeds higher than
10 mph (16 km/h). If you do, it could cause a
complete clutch failure, making your vehicle
inoperative.
%
*
[DR15600(ALL)01/95]
Steering Your Vehicle
[DR15700(ALL)07/93]
Your vehicle may be equipped with power
steering. Power steering uses energy from the
engine to help steer your vehicle.
%*
[DR15800(ALL)04/95]
If the amount of effort needed to steer your
vehicle changes at a constant vehicle speed, have
the power steering system checked. If the power
steering system breaks down (or if the engine is
turned off), you can steer the vehicle manually
but it takes more effort.
*
[DR16000(ALL)01/95]
Never hold the steering wheel to the extreme
right or left for more than five seconds if the
engine is running. This can damage the power
steering pump.
%
*
[DR16200(ALL)03/95]
Brakes
%*
[DR16300(ALL)01/95]
Applying the Brakes
[DR16350(ALL)07/93]
Your vehicle has power-assisted brakes that
adjust automatically as the brake pads or linings
wear down.
[DR16400(ALL)08/95]
Your vehicle may have four-wheel anti-lock disc
brakes which adjust automatically through
everyday use. Refer to section on anti-lock
brakes later in this chapter.
*
[DR16700(ALL)05/95]
Apply the brake pedal gradually. Use the
ºsqueezeª technique Ð push on the brake pedal
with a steadily increasing force. This allows the
wheels to continue to roll while you are slowing
down, which lets you steer properly.
File:10ctdre.ex
Update:Tue Sep 19 14:53:34 1995

233
*
[DR16800(ALL)05/95]
If your vehicle does not have anti-lock brakes,
extreme braking can make the wheels lock and
slide, causing you to lose control of the steering.
If the wheels lock, release the brake pedal and
repeat the ºsqueezeª technique.
*
[DR16900(ALL)05/95]
Do not drive with your foot resting on the brake
pedal; you will wear out the linings and increase
your vehicle's stopping distance. Brake rotor
damage may also eventually occur.
*
[DR17000(ALL)05/95]
RWARNING
If you are driving down a long or steep
hill, shift to a lower gear. Do not apply
your brakes continuously, as they may
overheat and become less effective.
*
[DR17100(ALL)02/95]
Occasional brake squeal during light to moderate
stops does not affect the function of the brake
system and is normal. However, if the squeal
becomes annoyingly loud or increases
significantly in frequency of occurrence, return
the vehicle to your dealer for inspection.
[DR17200(ALL)09/89]
The high-mount brakelamp will light when you
apply the brakes.
[DR17300(ALL)05/95]Anti-lock Brake System
(If equipped)
*
[DR17325(ALL)11/94]
Your vehicle may come with the optional
anti-lock brake system. Whenever your wheels
start to lock (which could result in a skid) the
anti-lock brake system prevents the lock-up by
automatically releasing and re-applying the
brakes. The brake pedal will pulsate as a result
of the automatic releasing and re-applying of the
brakes. In spite of this improvement in braking
performance, you should continue to be cautious
in all hazardous driving situations, especially
when driving on hazardous road surfaces. Even
File:10ctdre.ex
Update:Tue Sep 19 14:53:34 1995

237
%*
[DR19100(ALL)01/95]
Driving Under Special Conditions
%*
[DR19200(ALL)01/95]
Tips for Safe Driving
*
[DR19300(ALL)07/95]
As with any new vehicle, yours may drive and
handle differently from your previous vehicle.
Use care until you become accustomed to its
various features and driving characteristics.
*
[DR19400(ALL)03/95]
Operate your vehicle within reasonable limits.
Sudden acceleration, deceleration, turning, or
combinations of these maneuvers can cause a
vehicle to behave differently than anticipated.
[DR19500(ALL)02/95]
q
Extreme acceleration can cause the front
wheels to spin, perhaps resulting in reduced
steering control.
[DR19550(ALL)01/95]
q
If you do not have anti-lock brakes, extreme
braking can cause wheels to lock and slide,
making it difficult to control the direction of
the vehicle. Use the ºsqueezeª technique by
pushing on the brake pedal with steadily
increasing force. This allows the wheels to
brake yet continue to roll so that you may
steer in the direction you want to travel. If
you lock the wheels, release the brake pedal
and repeat the squeeze technique.
*
[DR19700(ALL)02/95]
q
If you abruptly release the accelerator or
brake hard while going too fast around a
severe curve, your vehicle may change
direction. Avoid application of the brakes, if
possible. If braking is necessary, it should be
done by using the ºsqueezeª technique
described above.
File:10ctdre.ex
Update:Tue Sep 19 14:53:34 1995

238 %
*
[DR19750(ALL)01/95]
Driving in Bad Weather
%*
[DR19800(ALL)01/95]
Slippery roads
*
[DR19900(ALL)03/95]
On some slippery road surfaces, front-wheel
drive may provide better acceleration than
rear-wheel drive. However, this does not mean
that your vehicle can stop any faster or any
better than a vehicle with rear-wheel drive.
Exercise the same caution while driving on
slippery roads with your front-wheel drive
vehicle as you would with a rear-wheel drive
vehicle.
*
[DR20000(ALL)03/95]
Drive cautiously on wet or snowy roads:
*
[DR20100(ALL)03/95]
q
Do not quickly move the steering wheel
unless necessary.
*
[DR20200(ALL)01/95]
q
Drive slower than you normally would.
*
[DR20400(ALL)01/95]
q
Give your vehicle more distance to stop.
*
[DR20500(ALL)03/92]
q
Pump the brake pedal steadily and evenly to
avoid locking your wheels. (Does not apply
to vehicles with anti-lock brakes.)
*
[DR20600(ALL)02/93]
q
Consider using one of the lower gears.
*
[DR20700(ALL)05/95]
RWARNING
To avoid losing control on slippery roads,
do not downshift into 1 (First) with the
automatic transaxle when moving faster
than 20 mph (32 km/h). Do not downshift
into 1 (First) with the manual transaxle
when moving faster than 10 mph
(16 km/h).
File:10ctdre.ex
Update:Tue Sep 19 14:53:34 1995

249
%*
[RE04500(ALL)03/95]
Changing a Tire
*
[RE04600(ALL)01/95]
If you get a flat tire while you are driving, do
not apply the brake heavily. Instead, gradually
decrease the speed. Hold the steering wheel
firmly and slowly move to a safe place on the
side of the road. Park on a level spot, turn off
the ignition, set the parking brake, and turn on
the hazard flashers.
%*
[RE04700(ALL)03/95]
The Temporary Spare Tire
*
[RE04800(ALL)03/95]
You may have a high pressure temporary spare
tire. This spare tire is smaller than a regular tire
and is designed for emergency use only. Use it
only when you get a flat tire and replace it as
soon as you can. This spare tire is marked with
the words ªTEMPORARY USE ONLYº so that
you can easily identify it.
*
[RE04900(ALL)01/93]
RWARNING
If you use the temporary spare tire
continuously or do not follow these
precautions, the tire could fail, causing
you to lose control of the vehicle, possibly
injuring yourself or others.
*
[RE05000(ALL)01/95]
When you drive with the temporary spare tire,
DO NOT:
*
[RE05100(ALL)01/95]
q
exceed 50 mph (80 km/h) under any
circumstances.
*
[RE05200(ALL)01/95]
q
load your vehicle so that it is heavier than
the maximum vehicle load rating listed on
the tire decal.
*
[RE05400(ALL)01/95]
q
use tire chains on this tire.
File:12ctree.ex
Update:Tue Sep 19 14:55:16 1995

319
*
[SV31100(ALL)01/95]
RWARNING
Do not let the reservoir for the master
cylinder run dry. This may cause the
brakes to fail.
%*
[SV31200(ALL)02/95]
Power Steering Fluid
*
[SV31300(ALL)01/95]
Check the level of the power steering fluid at
least twice a year (i.e., every Spring and Fall).
%*
[SV31400(ALL)03/95]
Checking and Adding Power Steering
Fluid
*
[SV31500(ALL)02/95]
1. Start the engine and let it run until the
power steering fluid reaches normal
operating temperature. The power steering
fluid will be at the right temperature when
the engine coolant temperature gauge in the
instrument cluster is near the center of the
NORMAL operating temperature range.
*
[SV31600(ALL)01/95]
2. While the engine idles, turn the steering
wheel back and forth several times. Make
sure that the cap assembly is installed at this
time.
*
[SV31700(ALL)05/95]
3. Turn the engine off.
[SV31850(ALL)02/94]
4. Check the fluid level in the reservoir. The
fluid level should be in between the F (Full)
and L (Low) markings on the reservoir.
[SV32100(ALL)02/94]
5. If the power steering fluid is low, add fluid
in small amounts, continuously checking the
level until you reach the F (Full) range. Do
not overfill. To find out how much fluid
your vehicle's reservoir for the power
steering fluid will hold, seeRefill capacitiesin
the Index.
[SV32150(ALL)03/95]
6. When you are finished, put the reservoir cap
back on and make sure that it fits snugly.
File:15ctsve.ex
Update:Tue Sep 19 14:37:50 1995