wiper blades FORD EXPEDITION 2003 2.G Owners Manual

Speed dependent wipers
When the windshield wiper control is set on the intermittent settings,
speed-sensitive front wipers automatically adjust as the vehicle’s speed
changes.
Windshield wiper blades
Check the wiper blades for wear at least twice a year or when they seem
less effective. Substances such as tree sap and some hot wax treatments
used by commercial car washes reduce the effectiveness of wiper blades.
Checking the wiper blades
If the wiper blades do not wipe properly, clean both the windshield and
wiper blades using undiluted windshield wiper solution or a mild
detergent. Rinse thoroughly with clean water. To avoid damaging the
blades, do not use fuel, kerosene, paint thinner or other solvents.
Changing the wiper blades
It is recommended that wiper blades are renewed before winter.
To replace the wiper blades:
1. Fold back the wiper arm and
position the wiper blade at right
angles to the wiper arm.
2. To remove, press the retaining
clip (A) to disengage the wiper
blade, then pull the blade down
toward the windshield to remove it
from the arm.
3. Install the new wiper blade on the
arm and press it into place until a click is heard.
Driver Controls
93

WINDOWS AND WIPER BLADES
The windshield, rear window and wiper blades should be cleaned
regularly. If the wiper does not wipe properly, substances on the
windshield, rear window or the wiper blades may be the cause. These
may include hot wax treatments used by commercial car washes, tree
sap, or other organic contamination. To clean these items, please follow
these tips:
•The windshield or rear window may be cleaned with a non-abrasive
cleaner such as Motorcraft Ultra Clear Spray Glass Cleaner (ZC-23),
available from your dealer.
•Do not use abrasives, as they may cause scratches.
•Do not use fuel, kerosene, or paint thinner to clean any parts.
•Wiper blades can be cleaned with isopropyl (rubbing) alcohol or
windshield washer solution. Be sure to replace wiper blades when they
appear worn or do not function properly.
INSTRUMENT PANEL AND CLUSTER LENS
Clean the instrument panel with a damp cloth, then dry with a dry cloth.
•Avoid cleaners or polish that increase the gloss of the upper portion of
the instrument panel. The dull finish in this area helps protect the
driver from undesirable windshield reflection.
Do not use chemical solvents or strong detergents when cleaning
the steering wheel or instrument panel to avoid contamination of
the air bag system.
•Be certain to wash or wipe your hands clean if you have been in
contact with certain products such as insect repellent and suntan
lotion in order to avoid possible damage to the painted surfaces.
INTERIOR
For fabric, carpets, cloth seats and safety belts:
•Remove dust and loose dirt with a vacuum cleaner.
•Remove light stains and soil with Ford Extra Strength Upholstery
Cleaner (E8AZ-19523–AA).
•If grease or tar is present on the material, spot-clean the area first
with Motorcraft Spot and Stain Remover (ZC-14).
•Never saturate the seat covers with cleaning solution.
Cleaning
262

WINDSHIELD WASHER FLUID
Add fluid to fill the reservoir if the
level is low. In very cold weather, do
not fill the reservoir completely.
Only use a washer fluid that meets Ford specification ESR-M17P5–A.
Refer toLubricant specificationsin this chapter.
State or local regulations on volatile organic compounds may restrict the
use of methanol, a common windshield washer antifreeze additive.
Washer fluids containing non-methanol antifreeze agents should be used
only if they provide cold weather protection without damaging the
vehicle’s paint finish, wiper blades or washer system.
Note:Do not put washer fluid in the engine coolant reservoir. Washer
fluid placed in the cooling system may harm engine and cooling system
components.
Checking and adding washer fluid for the liftgate
Washer fluid for the liftgate is supplied by the same reservoir as the
windshield.
ENGINE OIL
Checking the engine oil
Refer to the scheduled maintenance guide for the appropriate intervals
for checking the engine oil.
1. Make sure the vehicle is on level ground.
2. Turn the engine off and wait a few minutes for the oil to drain into the
oil pan.
3. Set the parking brake and ensure the gearshift is securely latched in P
(Park).
4. Open the hood. Protect yourself from engine heat.
Maintenance and Specifications
269

Changing a tire .........................236
Child safety restraints ..............177
child safety belts ....................177
Child safety seats ......................180
in front seat ............................181
in rear seat ......................181, 184
Cleaning your vehicle
engine compartment ..............260
instrument panel ....................262
interior .............................262–263
plastic parts ............................261
washing ....................................259
waxing .....................................259
wheels ......................................260
wiper blades ............................262
Climate control (see Air
conditioning or Heating) ......69, 72
Clock ................................23, 34, 43
Compass, electronic ..........100, 112
calibration ...............................113
set zone adjustment .......113, 115
Console ......................................125
overhead ..............................95, 97
Controls
power seat ...............................143
steering column ......................106
Coolant
checking and adding ..............274
refill capacities ................278, 300
specifications ..................303, 305
Cruise control
(see Speed control) ..................103
Customer Assistance ................227
Ford accessories for your
vehicle .....................................264
Ford Extended Service Plan .251
Getting assistance outside
the U.S. and Canada ..............255Getting roadside assistance ...227
Getting the service
you need .................................249
Ordering additional
owner’s literature ...................256
The Dispute Settlement
Board .......................................252
Utilizing the Mediation/
Arbitration Program ...............255
D
Daytime running lamps
(see Lamps) ................................82
Defrost
rear window ..............................80
Dipstick
automatic transmission
fluid ..........................................291
engine oil .................................269
Doors
door ajar warning ...............13, 15
lubricant specifications ..........303
Driveline universal joint
and slip yoke .............................293
Driving under special
conditions ..........................212, 215
sand .........................................214
snow and ice ...........................216
through water .................215, 219
E
Electronic message center .......114
Emergencies, roadside
jump-starting ..........................241
Emission control system ..........288
Engine ........................................305
check engine/service engine
soon light ..................................10
Index
314

lubricant
specifications ..................303, 305
Trip odometer .............................18
Trunk .........................................130
Turn signal ............................13, 84
V
Vehicle dimensions ...................305
Vehicle Identification Number
(VIN) ..........................................308
Vehicle loading ..........................219
Ventilating your vehicle ...........194
W
Warning chimes .....................14–15Warning lights (see Lights)
.......10
Washer fluid
..............................269
Water, Driving through
.............219
Windows
power
.........................................99
rear wiper/washer
.....................93
Windshield washer fluid
and wipers
checking and adding fluid
.....269
checking and cleaning
..............93
liftgate reservoir
.....................269
operation
...................................92
replacing wiper blades
.......93–94
Wrecker towing
.........................247
Index
319