start stop button FORD EXPLORER 1996 2.G Owners Manual

118
[IP05800( X)03/95]
When in AUTOMATIC and weather conditions require heat, air
will be sent to the floor. However, a feature is included in your
EATC to prevent blowing cold air to the floor if the engine
coolant is not warm enough to allow heating. In 3 1/2 minutes
or less, the fan speed will start to increase and the air flow will
be to the floor area.
[IP05900( X)07/94]
If unusual conditions exist (i.e. window fogging, etc.), the six
manual override buttons allow you to select special air
discharge locations. A thumbwheel allows you to adjust the fan
speed to suit your needs.
*
[IP06000( X)03/95]
Temperature selection
[IP06100( X)03/95]
The RED and BLUE buttons at the upper left of the Control are
for temperature selection. The RED button will increase the set
temperature and the BLUE button will lower the set
temperature. Pressing a button and releasing it will change the
set temperature one degree. Holding either button in will
rapidly change the temperature setting in one degree increments
to either65ÊF (18ÊC)(BLUE) or85ÊF (29ÊC)(RED). Then, the set
temperature will jump 5Ê and stop at either60ÊF (16ÊC)which is
maximum cooling or90ÊF (32ÊC)which is maximum heating.
When you select60ÊF (16ÊC) or 90ÊF (32ÊC), the fanwill go to
HI speed for maximum airflow.
File:06unipx.ex
Update:Thu Feb 29 09:05:45 1996

Electronic Sound Systems
215
*
[AS05700( X)08/95]


Using the“SEEK”function with your cassette tape player
*
[AS05800( X)05/95]
While in the tape mode, push the right (
a) side of the
“SEEK”button to seek forward to the next selection on the
tape. Push the left (
b) side to restart a currently playing
tape selection.
*
[AS05900( X)01/95]


Using the“Blank Skip”function with your cassette tape
player
*
[AS06000( X)01/95]
Press the“Blank Skip”button to activate the blank skip
mode. After approximately 20 seconds of blank program, the
tape will seek forward to the next program.
*
[AS06100( X)08/95]


Using the“SCAN”function with your cassette tape player
*
[AS06200( X)01/95]
Pushing the“SCAN”button will begin the forward scan
mode on the tape currently playing, stopping on each tape
selection for approximately eight seconds.
*
[AS06300( X)01/95]
To stop the scan mode on the presently sampled tape
selection, press the“SCAN”button or the“TAPE”button.
*
[AS06400( X)08/95]


How to change the side of the tape being played
*
[AS06500( X)01/95]
The alternate side of the tape can be selected by pressing the
“SIDE 1-2”button.
*
[AS06600( X)08/95]
How to eject the tape
*
[AS06700( X)03/95]
To stop the tape and eject the cassette, press the“EJECT”
button. The tape will eject only when in the tape mode. The
cassette cannotbe ejected when the radio is playing an“AM”
or“FM”station. The system will revert to radio mode when
the cassette is ejected.
File:09unasx.ex
Update:Thu Feb 29 09:08:53 1996