wiper blades FORD EXPLORER 1996 2.G Owners Manual

Steering Column Controls
137
[SC05200(ALL)06/95]
To clean the windshield, push in the end of the wiper knob for
a single wipe. For a constant spray, keep the knob pushed in.
After you release the knob, the wipers operate for two to three
cycles before turning off (if wipers were off) or returning to the
interval setting selected.
*
[SC05300(ALL)08/95]
Do not try to clean the windshield when the washer fluid
container is empty or activate the washers at any time for more
than 15 seconds continuously. This could damage the washer
pump system.
[SC05350(ALL)05/95]
NOTE: The addition of shields to the front of the vehicle, as
used to deflect bugs, may also adversely affect the
washer system from delivering fluid to the
windshield. Devices such as bug shields are not
recommended to be added to your vehicle.
*
[SC05400(ALL)08/95]
RWARNING
In freezing weather, the washer solution may freeze on
the windshield and obscure your vision. Always warm
up the windshield with the defroster before you use the
washer fluid. If you cannot see through the windshield
clearly, it can increase the risk of being involved in a
collision.
*
[SC05500(ALL)08/95]
For information about refilling the washer fluid or replacing
your windshield wiper blades, seeWindshield washer fluid and
Wipersin the Index.
File:07unscx.ex
Update:Thu Feb 29 09:06:35 1996

Servicing Your Explorer
359 protection without damaging the vehicle's paint finish, wiper
blades, and windshield washer system.
*
[SV23900(ALL)10/89]
If you choose to use a windshield washing solution that must
be mixed, follow the manufacturer's mixing instructions.
Improperly mixed solutions may freeze unexpectedly.
[SV24000(ALL)05/95]
RWARNING
Windshield washer fluid contains methanol and it is
poisonous. Follow all instructions on the bottle of washer
fluid.
*
[SV24300( X)03/90]
Checking/adding the washer fluid for the liftgate
[SV24425( X)03/93]
Check the liftgate washer reservoir regularly. This is not the
same reservoir that your front windshield wipers use. The
opening for this reservoir is on the left side of the body above
the tail lamp. A fill cup is located on top of the left hand tail
lamp and is accessible when the liftgate is open. Close the fill
cup cover after filling and before closing the liftgate. Refill this
reservoir with the same solution you use for your windshield.
To find out how much washer fluid the liftgate reservoir holds,
seeRefill capacitiesin the Index.
[SV24460( X)04/94]
10-1/2 pica
art:0020557-C
Liftgate window washer reservoir
File:15unsvx.ex
Update:Thu Feb 29 09:20:34 1996

360
%*
[SV24500(ALL)03/95]
Wiper Blades
*
[SV24600(ALL)03/95]
Check the windshield wiper blades at least twice a year. Also
check them whenever they seem less effective than usual. Such
substances as tree sap and some hot wax treatments used by
commercial car washes reduce the effectiveness of wiper blades.
*
[SV24700(ALL)09/95]
If the blades do not wipe properly, clean both the windshield
and the wiper blades. Use undiluted windshield washer solution
or a mild detergent. Rinse thoroughly with clear water. Do not
use fuel, kerosene, paint thinner, or other solvents to clean your
wiper blades. These will damage your blades.
*
[SV24800(ALL)03/95]
To make reaching the wiper blades easy, simply turn the
ignition to the ACC position and turn your wipers on. Wait for
them to reach a vertical position and turn the ignition to the
OFF position. Do not move the wipers manually. Manually
moving the wipers across the windshield may damage them.
*
[SV24900(ALL)03/01]
Wiper blade replacement
[SV25000(ALL)01/95]
If the wipers still do not work properly after you clean them,
you may need to replace the wiper blade assembly or the blade.
When replacing the wiper blade assembly, blade refill, or wiper
arm always use a Motorcraft part or equivalent.
*
[SV25025(ALL)10/93]
To replace the wiper blades:
[SV25030(ALL)10/94]1.
Cycle windshield wiper arm and wiper blade to where
removal of blade can be performed without difficulty. Turn
ignition off at desired position.
[SV25075(ALL)10/94]2.
To remove wiper blade assembly from wiper mounting arm,
depress lock tab and push wiper mounting arm away from
wiper blade assembly.
[SV25100(ALL)10/94]3.
To install wiper blade assembly, pull wiper mounting arm
down on wiper blade until lock tab is engaged.
File:15unsvx.ex
Update:Thu Feb 29 09:20:34 1996

Servicing Your Explorer
361
[SV25125(ALL)10/94]
24 pica art:0021371-A
Replacing the wiper blades
File:15unsvx.ex
Update:Thu Feb 29 09:20:34 1996

443
Index
Windshield
defrosting..................... 113
washing...................... 136
Windshield washer fluid and wipers
checking and adding fluid.............. 358
checking and replacing wiper blades......... 360
liftgate reservoir................... 358
low washer fluid light................ 104
operation...................... 136
reservoir...................... 358
specifications..................358, 406
variable interval wipers............... 136
Windshield wipers and washer............. 136
Wrecker towing.................... 311
File:unixx.ex
Update:Thu Feb 29 09:21:09 1996