clock setting FORD EXPLORER 1997 2.G Audio Guide

Shuffle feature (if equipped)
The shuffle feature works while in
CD play mode and allows you to
listen to randomly selected tracks
on one or all CDs loaded in the
changer.
Press the Shuffle control to listen
to the tracks on the current CD(s)
in random order.
Random order play continues until
the control is pressed again.
Clock
Press the CLK control to display
the time on the audio system
display.
Time is displayed:
²until an audio function control is
pressed.
²approximately ten seconds after
each audio system change.
²when the audio system is off
and the ignition is ON.
To remove the clock display, press
the CLK control again.
COMP
5SHUFFLE
6
COMP
5SHUFFLE
6
AUTO
SET CLK
CLK
uno_clock
uno_setting_clock
Controls and features
18

Setting the clock
To set the hour, hold the CLK
control and press:
to increase hour and
to decrease hours.
To set the minute, hold the CLK
control and press:
to increase minutes and
to decrease minutes.
Blank skip function
Press this control to toggle the
BLANK SKIP function on and off.
When the function is activated, the
audio system will automatically
skip over any blank (silent)
passages in the playing cassette
tape. When the function is
deactivated, the audio system will
play the blank portion of the
cassette tape.
DSP function (if equipped)
Press the DSP control to activate
the DSP effect. To scroll through
the available DSP effects, press
. Select these available DSP
AUTO
SET CLK
SEEK
TUNE
DISCS
SCANSEEKAUTOSET
AUTO
SET CLK
SEEK
TUNE
DISCS
TAPE CDTUNE
DISCS
DSPBLANK
SKIP
DSPBLANK
SKIP
uno_blank_skip
uno_dsp_function
Controls and features
19