mirror FORD EXPLORER 2013 5.G Quick Reference Guide

14
Function
ReaRview caMeR a* This system provides a visual display of
the area behind the vehicle. The display
automatically appears in the touch screen
when the vehicle is in R (Reverse) and
uses green, yellow and red guides to
alert you of your proximity to objects. For
non-touch screen vehicles, the image will
appear in the 4.2 in display.
ReveRSe SenSing S ySteM*This system sounds a warning tone if
there is an obstacle near the vehicle’s rear
bumper when the vehicle is in R (Reverse)
and is traveling less than 3 mph (5 km/h).
The warning tone will increase in
frequency as the object gets closer.

note: Visibility aids do not replace the
need to watch where the vehicle is moving.
Refer to your Owner’s Manual for safety
information, more details and limitations.
bLind SP ot inFoRMation
Sy SteM (bLiS®) with cR oSS
tR aFFic aLeR t (cta )*
BLIS uses sensors to help you determine
if a vehicle may be in your blind spot
zone. The CTA feature alerts you if a car
is coming toward you when you are
backing out of a parking space. BLIS
and CTA will display a yellow indicator
light in your exterior mirrors and the
CTA will also sound tones and display
messages to warn you which direction
vehicles are approaching. Refer to the
Driving Aids chapter in your Owner’s
Manual for more information.
SeLectShiFt a utoMatic™
tR anSMiSSion*
Gives you the ability to manually change
gears if you’d like. To use, move the
gearshift lever from D (Drive) to S (Sport).
Then use the toggle on your gear shift
lever to make shifts manually. Press the
(+) button to upshift, press the (–) button
to downshift.
MyKey®
MyKey allows you to program certain
driving restrictions in order to promote
good driving habits. You can program
things like; speed restrictions, limited
volume levels and safety belt reminders. For complete information, refer to the
MyKey chapter in your Owner’s Manual.
SecuRicode™ KeyLe
SS
entR y SySteM*
Allows you to lock or unlock the doors
using the touchpad. You will need your
five digit factory code located on your
owner’s wallet card in the glove box.
Refer to the Locks chapter in your
Owner’s Manual for more information
on how to use SecuriCode.
PoweR LiFtgate*Your liftgate has an automatic open
and closing feature. To open remotely,
press
twice on your keyhead within
three seconds. Press twice again to
close or reverse the movement. You can
also operate the liftgate by pressing
the
control located on the
instrument panel.
* (if equipped)

coMF oRt
heated and cooLed
FR ont Seat S*
To access heated seats and cooled seats
on touch screen equipped vehicles, press
the Climate corner on your touch screen.
Press the heated
or cooled seat
iconrepeatedly to cycle through the
various heat or cool modes and off. For
non-touch screen vehicles, use the hard
button controls (indicated by the same
symbols). Press the controls repeatedly
to cycle through the various heat or cool
modes and off. Indicator lights on the control
will show what settings you have selected.
tiL ting head Re StR aint S*Your vehicle’s front row head restraints
can be adjusted. Pull up to raise the head
restraint. To lower, press the head restraint
down while pressing and holding the
guide sleeve adjust/release button. Tilt the
head restraint for additional comfort by
gently pulling the top of the head restraint
forward. Once it is in the forward-most
position, tilting it forward once more will
release it to the upright position.
note: Do not attempt to force the
headrest backward after it is tilted. Instead,
continue tilting it forward until the headrest
releases to the upright position.
PoweRFoLd® thiRd R ow Seat*
note: The power fold seats work only
when the vehicle is in P (Park) and the
liftgate is open.
The third row seat features a power one-
touch operation that allows you to adjust
the seats with the touch of a button. The
buttons are located behind the third row
seats on the left-side quarter trim panel.
To use, press the Rh/both/Lh button
to select the right-side seat, the left-side
seat or both seats you want to move.
Then, select the desired seat position:
• Press the Stow button to stow the
seat into the tub floor.
• Press the F oLd button (the top
portion of the button) to fold down
the seatback.
• Press the noRMaL button to return the
seat to the normal seating position.
MeMoR y Function* Allows one touch recall of memory
positions for the driver seat, power
mirrors, steering column and power
adjustable foot pedals. Use the memory
controls located on the driver’s door
to program and then recall memory
positions. To program position 1, press and
hold the 1 button until you hear a chime.
Use this same procedure to set positions
2 and 3 using the respective buttons. You
can now use these controls to recall the
set memory positions.
d uaL -PaneL MoonR ooF and
P oweR S unScReen*
Your moonroof is equipped with a
one-touch, express opening and closing
feature. To open, press and release the
SLide control, the sunscreen will open
automatically and the moonroof will
open to the first position. To fully open the
moonroof, press and release the SLide
control again. To close, pull and release
the SLide control. Press and release the
tiLt control to vent the moonroof. Pull
and release the tiL t control to close the
moonroof. To open the sunscreen press
and release
. Pull and release
to close the sunscreen.
15