CD player FORD EXPLORER SPORT TRAC 2005 1.G Quick Reference Guide
[x] Cancel search | Manufacturer: FORD, Model Year: 2005, Model line: EXPLORER SPORT TRAC, Model: FORD EXPLORER SPORT TRAC 2005 1.GPages: 12, PDF Size: 1.15 MB
Page 3 of 12

A
B
E
D
C
G
H
J
K
I
(if equipped)(if equipped)
Scan Function– In radio mode, press
to hear a sampling of all listenable
stations. In CD mode, press to hear abrief sampling of all selections on the
current CD.
CD/AUX – Press to select CD/AUX modes.
No CD will display if a CD is not in the
audio system. If a disc is loaded, there
will be a number (1 6) inside the circle
on the display. When in radio mode,
press CD/AUX to play a loaded CD.
Loading CD– Press LOAD and then a
preset number to select a slot. Press andhold LOAD to activate autoload.
Volume/Power Control – Press the
control to turn the audio system on or
off. Turn the control to raise or lowervolume.
AM/FM Select – Press to select AM/FM
frequency band. Autostore allows you to
set the strongest local radio stationswithout losing your original manually
preset stations for AM, FM1, or FM2.
Press and momentarily hold AM/FM.
AUTOSTORE will flash on the display.
When the six strongest stations are filled,
the station stored in preset 1 will begin
playing. If there are less than six strong
stations, the system will store the last
one in the remaining presets. Press againto disengage.
Satellite – Your Audiophile radio comes
equipped with satellite ready capability.
The kit to enable satellite reception is
available through your Ford dealer.
Detailed satellite instructions are
included with the dealer installed kit.
Dealer installed satellite kits are only available in the continental United States.
Disc/Tune CAT– In radio mode, press to
move to the next frequency up or down
the band. In CD mode, press to select a
disc in the CD player. CAT is only availablewhen equipped with satellite radio. The
kit to enable satellite reception is available
through your Ford dealer. Detailed
satellite instructions are included with the
dealer installed kit.
Digital Signal Processing– Press DSP
and then SEL to choose the desired signal mode.
Seek Function– In radio mode, press to
move to the next listenable station up or
down the band. In CD mode, press to
select the next/previous track on the
current disc.
Setting the Clock– Press MENU until
SELECT HOUR or SELECT MINUTE is
displayed. Press SEL to set the time. PressMENU again to disengage the clock mode.
Setting Memory Preset Stations– Select
AM, FM1, or FM2 band, then select a
station. Next, press and hold a numbered
control until the sound returns.
A
B
D
E
C
F
G
J
K
I
H
CAUTION: DO NOT USE CD WITH ADHESIVE LABEL*
* CDs with adhesive labels and irregularly shaped CDs may get stuck in the CD player. Homemade
CDs should be identified with permanent felt tip marker rather than adhesive labels.
F
Page 7 of 12

From the rugged exterior styling to the bountiful amenities,
every Ford SUV vehicle is fully equipped to help you enter the
next territory. In order to help you fully appreciate the numerous
features of your new vehicle, we invite you to explore this
easy to use Quick Reference Guide. Used in conjunction with the Interactive Owner Experience CD Rom, you can briefly hear
how to operate the features listed to the right once you place
the CD into any audio CD player. Find the numbered call out from
the photograph of the instrument panel located in the center of
the Quick Reference Guide, and then select the corresponding
numbered audio track on the CD. For more comprehensive
information, place the CD into any computer.*
*Refer to the minimum configuration
requirements located on the back
panel of the CD jacket.
1
This vehicle handles differently from an
ordinary passenger car in driving conditions
which may occur on streets and highways
and off road. DRIVE WITH CARE AND
WEAR A SAFETY BELT AT ALL TIMES. Ford urges you to read the
Owner’s Guide and Driving Your SUV or Truck Supplement for
further information on safe driving precautions and instructions.