instrument panel FORD EXPLORER SPORT TRAC 2005 1.G Quick Reference Guide

Temperature Control– Rotate the
knob to adjust the temperature of
the airflow inside the vehicle.
Fan Speed Control– Rotate the knob
to adjust the volume of air circulatedin the vehicle.
A/C– Uses outside air to cool the
vehicle. Airflow will be from the
instrument panel vents only. The air conditioning will only function
if the outside temperature is about
43°F (6°C) or higher.
Max A/C– Uses recirculated air to
quickly cool the vehicle. Airflow will
be from the instrument panel vents
only. MAX A/C is noisier than A/C,
but more economical and efficient. This mode can also be used to help
prevent undesirable odors from entering the vehicle. The air conditioning will only function if
the outside temperature is about
43°F (6°C) or higher.
Panel– Distributes outside air
through the instrument panel vents.
Panel and Floor– Distributes outside
air through the instrument panelvents and the floor vents.
Floor– Distributes outside air through
the floor vents.
Floor and Defrost– Distributes
outside air through the windshield
defroster vents and the floor vents.
Defrost– Distributes outside air
through the windshield defrostervents. It can be used to clear ice or
fog from the windshield.
Operating Tips:Under normal weather conditions, do not
leave the airflow selector in the MAX A/C or OFF position when the vehicle is parked.
This allows the vehicle to "breathe" usingthe outside air inlet vents.
Do not put objects under the front seats
that will interfere with the airflow to theback seats.
A
B
C
E
D
F
G
I
H
A
B
E
C
D
F
G
I
H

From the rugged exterior styling to the bountiful amenities,
every Ford SUV vehicle is fully equipped to help you enter the
next territory. In order to help you fully appreciate the numerous
features of your new vehicle, we invite you to explore this
easytouse Quick Reference Guide. Used in conjunction with the Interactive Owner Experience CDRom, you can briefly hear
how to operate the features listed to the right once you place
the CD into any audio CD player. Find the numbered callout from
the photograph of the instrument panel located in the center of
the Quick Reference Guide, and then select the corresponding
numbered audio track on the CD. For more comprehensive
information, place the CD into any computer.*
*Refer to the minimum configuration
requirements located on the back
panel of the CD jacket.
1
This vehicle handles differently from an
ordinary passenger car in driving conditions
which may occur on streets and highways
and offroad. DRIVE WITH CARE AND
WEAR A SAFETY BELT AT ALL TIMES. Ford urges you to read the
Owner’s Guide and Driving Your SUV or Truck Supplement for
further information on safe driving precautions and instructions.

Headlamp/Panel Dimmer Control
Rotate clockwise
to the first
position to turnon the parking
lamps, instrumentpanel lamps,license platelamps and tail
lamps. Rotate to the second position to
also turn on the headlamps.
Use the instrument panel dimmer control, to
the right of the headlamp control, to adjustthe intensity of the panel lighting duringheadlamp and parking lamp operation.Rotate up to brighten and down to dim.Rotate to the full up position (past detent)
to also turn on the interior lamps. To turn
off the interior lamps, rotate to the fulldown position (past detent).
You may also set the headlamps to
automatically turn on at night and off during the day by using the autolamp delaysystem (if equipped) on the headlamp
control. In addition, the delay system can be set to keep the headlamps on for up to
three minutes after the key is turned to OFF.
For more information, please consult your
Owner’s Guide.
Check Engine Lamp
The Check Engine indicator light
illuminates when the ignition is
first turned to the ON position to
check the bulb. Solid illumination
after the engine is started indicates
the On Board Diagnostics System (OBDII)
has detected a malfunction. For more
information, please consult the
On Board
Diagnostics (OBDII)section in theMaintenance and Specificationschapter
ofyour Owner’s Guide.
2
3
Your vehicle is also equipped with a check
fuel cap lamp that illuminates when the fuel
cap is not correctly installed. Continually driving with this light on may cause the
check engine warning light to come on. To
help prevent activation, always secure your
fuel cap by turning it clockwise 1/8 of a turnuntil it stops.
ABS Warning Lamp
Illuminates momentarily when the
ignition is turned to the ON position.
In an emergency, apply continuous
force on the brake to prevent wheel lock
when braking on slippery surfaces — do
notpump your brakes. Any pulsation or
noise you may feel or hear is normal.
Hazard Flasher Control
The hazard flasher control is on the
steering column, just behind the steering
wheel. Press to activate all hazard flashers
simultaneously in an emergency, or to warn
traffic of vehicle breakdown, or approaching
danger. Press the control again to turn the
flashers off. The hazard flashers can be
operated when the ignition is off.
Gearshift/Overdrive Control
Overdrive is the normal drive position for the
best fuel economy. Only deactivate overdrive(O/D OFF) when driving with a heavy load,towing a trailer up or down steep hills, or
when additional engine braking is desired. To
deactivate, press the transmission control
switch on the end of the gearshift lever.
FourWheel Drive (4X4) Control (if equipped)
Twowheel drive (2WD)
powers the rear wheels
only and is used for streetand highway driving. 4X4
HIGH is used for extra
traction such as in snow, on
icy roads, or in offroadsituations. It should not be
operated on dry pavement.
7
5
6
4

4X4 LOW uses extra gearing to provide
maximum power to all four wheels.
To shift between 2WD and 4X4 HIGH: Turn
the control between the 2WD and the 4X4
HIGH position at any forward speed, as long
as the rear wheels are NOT slipping.
To shift to or from 4X4 LOW: Bring the
vehicle to a complete stop. Press the brake.Place the gearshift in N (Neutral), and then
turn the control to the desired position.
Premium Dual Media Radio (if equipped)
Please see reverse side for more details.
In Dash SixCD Radio (if equipped)
Please see reverse side for more details.
Power Down Back Window Control
Turn counterclockwise and release to lower
the window to the fullopen position. Turn
the control clockwise and release to raise the
window to the fullclosed position. Press onceto move the window (up or down) to the
vent position. If the window is already in the
vent position and the control is pressed, no
movement will occur.
To operate the power down back window,
the ignition switch must be in the ON or ACC
position. All rearseat occupants and/or cargo
must be properly restrained and clear of the
back window opening before operating the
power down back window.
Climate Control System
Please see reverse side for more details.
Speed Control (if equipped)
To operate, the speed
control must be ON and the
vehicle’s speed must be at or
above 30 mph (48 km/h). To
set a speed, press SET ACC.
To set a higher speed, press
SET ACC again. To set a lower
speed, press COAST. Pressing
RSM will return to a previously
set speed. To turn the speed
control off, press the OFF button or
turn off the vehicle’s ignition. Press
the brake pedal to disengage.
Hood Release
Inside the vehicle, pull the hood release
handle under the bottom of the instrument
panel near the steering column. Next, release
the auxiliary latch located in the centerbetween the hood and the grille. Lift the
hood and secure it with the prop rod.
Turn Turn Signal and Wiper/Washer Control
Rotate the end
of the control
to increase or
decrease the speed of the wipers.
When the wiper control is on, the speed of the wipers will automatically adjust with the
vehicle’s speed. Push the control on the end of the lever briefly for a single wipe (no wash).
Push and hold for three wipes with a wash. A long push and hold will activate a longerwash cycle (up to ten seconds).
The Explorer Sport Trac is also equipped
with a rear window wiper and washer control,
located to the right of your audio system. Turn
the control clockwise to the desired interval
speed. Press to activate the washer fluid.
For extended wiper blade quality, occasional
cleaning of the wiper blades is required.
8
9
10
11
12
13
14