seat memory FORD F150 2001 10.G Rear Seat Entertainment System Manual

REAR SEAT ENTERTAINMENT MODULE (RSEM)
The Rear Seat Entertainment Module (RSEM) allows the rear seat
passengers to operate the Rear Seat Entertaiment System (RSES). They
can toggle between radio, cassette, CD or CD/DJ media sources when
enabled. To enable the RSES and RSEM, simultaneously press the
memory preset buttons 3 and 5 on the radio face. When the RSEM
controls are enabled,
will appear in the radio display. Press the 3
and 5 presets again to disable the RSES system.
1.AUX INPUTSvideo and audio input jacks
YELLOW: Video
WHITE: Left Audio
RED: Right Audio
2.HEADPHONEterminals
Standard 1/8º stereo headphone jacks.
3.SPEAKERbutton
The vehicle's speakers automatically default to SINGLE PLAY mode. In
SINGLE PLAY mode, the audio is played through all four speakers for all
passengers to hear.
Description
11

Press the speaker control to enter into DUAL PLAY. The rear speakers
will turn off and the rear seat passengers will enter into headphone
mode. They are able to listen to their selected media source via
headphones and control the volume level. While DUAL PLAY is engaged,
the front seat passengers can listen to the desired media source through
the radio speakers.
4.VOLUMEbuttons
Press (+) or (þ) button to decrease or increase audio volume. When
ignition is turned ON, volume defaults to LOW. In SINGLE PLAY mode,
the volume level can be changed in all media sources. However, the rear
seat passengers cannot exceed the volume level set by the front seat
passengers. In DUAL PLAY mode, only headphone volume level may be
changed.
5.MEDIAbutton
Press to toggle between the following media sources: AM, FM1, FM2,
TAPE, CD, CDDJ, VCP and AUX. When chosen, the media source will
illuminate in the radio display.
When the Rear Seat Entertainment System (RSES) is in dual play mode,
the selected media source will illuminate in the radio display. The letters
RSC will appear in front of the selected mode. ªRSCº indicates ªRear
Seat Controlº and identifies the mode as being used by the rear seat
passengers.
Note:While in dual play mode, both AM and FM media sources cannot
be selected simultaneously. A selected radio station will be shared by
front and rear seat passengers.
6.MEM
Press in radio mode to scroll through the memory presets in AM, FM1 or
FM2.
Press in CDDJ mode to select the next disc in the compact disc changer.
The memory function does not operate in TAPE, CD, VCP or AUX
modes.
7.SEEKbuttons
Press to find the next or previous listenable radio station, tape selection
or CD track (depending on the mode).
Description
12

GENERAL OPERATION
²When the engine is not running, use the system sparingly otherwise it
will run the battery down.
²
When the ignition is turned to OFF, the Rear Seat Entertainment System
(RSES) is also turned OFF. When the ignition is turned ON, the RSES
returns to SINGLE PLAY mode and the last media position. To play a
video tape, toggle the MEDIA control on the RSEM to VCP mode.
²Do not leave the videocassette in the videocassette player (VCP)
overnight or for long periods of time.
²To listen through the vehicle's speaker system, press the speaker
button (
/) on the Rear Seat Entertainment Module (RSEM).
When the ignition is turned ON, audio is through the headphones at
LOW volume. Press the (+) control to increase volume.
²
To enable or disable the RSES, simultaneously press the 3 and 5 memory
presets on the radio face. When the RSEM controls are enabled,
will
appear in the radio display. Press the presets again to disable the RSES.
Inserting/removing cassette
Inserting cassette
²Open the center console cover. Insert a videocassette into the cassette
compartment.
Inserting a videocassette into the VCP automatically turns the power ON
and the tape should begin playback if the tape is an autoplay videocasette
tape (recording protection tabs are removed).
The tape counter is automatically reset to 0:00:00.
If the vehicle is traveling over rough terrain, it may be difficult to insert
the cassette because the machine attempts to hold the cassette firmly to
prevent vibration. If this condition is encountered, either press firmly or
Operating Instructions
14

2. Choose a desired address (index) with the INDEX button on the
remote control.
3. Search a desired address (index) for automatic playback of a program.
4. Each time the right button is pressed, the index number increases.
Pressing the left button decreases the index number.
5. A maximum of nine programs can be chosen at a time.
6. To discontinue search playback, press the STOP button.
Use the INDEX controls to search in a forward or reverse direction.
Memory control
The MEM (Memory) control allows
you to access preset radio stations
or your CD selections.
In AM, FM1 or FM2 modes, press the MEM (Memory) control to access
the first preset station. Press the control successively to access the
remaining preset stations.
In CD DJ mode, press the MEM (Memory) control to access the next
disc in the CD changer.
Media select
The MEDIA control allows you to
select from many different listening
medias. The selected media source
will appear in the radio display.
When in dual play mode, the
selected media source will appear in
the radio display with the letters
RSC in front of the mode. ªRSCº
indicates ªRear Seat Controlº and
identifies the mode being used by
the rear seat passengers.
Operating Instructions
20