brake FORD F350 2004 Workshop Manual

FORD F350 2004 Workshop Manual F350 2004 FORD FORD https://www.carmanualsonline.info/img/11/57806/w960_57806-0.png FORD F350 2004 Workshop Manual

Page 185 of 312

FORD F350 2004 Workshop Manual Preparing to tow
Use the proper equipment for towing a trailer and make sure it is
properly attached to your vehicle. See your dealer or a reliable trailer
dealer if you require assistance.
Hitches
Do

Page 186 of 312

FORD F350 2004 Workshop Manual Do not connect a trailer’s hydraulic brake system directly to your
vehicle’s brake system. Your vehicle may not have enough
braking power and your chances of having a collision greatly increase.
T

Page 195 of 312

FORD F350 2004 Workshop Manual Standard fuse amperage rating and color
COLOR
Fuse
ratingMini
fusesStandard
fusesMaxi
fusesCartridge
maxi
fusesFuse link
cartridge
2A Grey Grey———
3A Violet Violet———
4A Pink Pink———

Page 197 of 312

FORD F350 2004 Workshop Manual Fuse/Relay
LocationFuse Amp
RatingPassenger Compartment Fuse
Panel Description
10 10A* A/C clutch
11 20A* Radio (main)
12 20A* Cigar lighter / OBD II
13 5A* Power mirrors/switches
14 15A* Daytime runn

Page 198 of 312

FORD F350 2004 Workshop Manual Fuse/Relay
LocationFuse Amp
RatingPassenger Compartment Fuse
Panel Description
31 15A* Clutch interlock switch (manual
transmissions only), Transmission
range sensor (automatic
transmissions only) the

Page 200 of 312

FORD F350 2004 Workshop Manual CHANGING A FLAT TIRE
If you get a flat tire while driving:
•do not brake heavily.
•gradually decrease the vehicle’s speed.
•hold the steering wheel firmly.
•slowly move to a safe place on th

Page 203 of 312

FORD F350 2004 Workshop Manual 3. Fully insert the jack handle
through the bumper hole and into
the guide tube. The key and lock
will engage with a slight push and
counterclockwise turn. Some
resistance will be felt when turning
th

Page 204 of 312

FORD F350 2004 Workshop Manual 2. Turn engine off and block the diagonally opposite wheel (block not
provided).
3. Remove the jack, jack handle, lug wrench and spare tire from the
stowage locations.
4. Use the tip of the lug wrench

Page 212 of 312

FORD F350 2004 Workshop Manual When a wheel is installed, always remove any corrosion, dirt or
foreign materials present on the mounting surfaces of the wheel
or the surface of the front disc brake hub and rotor that contacts the
w

Page 230 of 312

FORD F350 2004 Workshop Manual PAINT CHIPS
Your dealer has touch-up paint and sprays to match your vehicle’s color.
Take your color code (printed on a sticker in the driver’s door jam) to
your dealer to ensure you get the corre