change language FORD F750 2012 12.G Owners Manual

Scheduled Maintenance Guide 264
Index 302
The information contained in this publication was correct at the time of going to
print. In the interest of continuous development, we reserve the right to change
specifications, design or equipment at any time without notice or obligation. No
part of this publication may be reproduced, transmitted, stored in a retrieval
system or translated into any language in any form by any means without our
written permission. Errors and omissions excepted.
© Ford Motor Company 2012
Table of Contents
3
2012 F-650/750(f67)
Supplement, 2nd Printing
USA(fus)

Info (information menu)
TIMERTimer displays the trip elapsed drive time.
To operate, do the following:
1. Press and release RESET to start the timer.
2. Press and release RESET to pause the
timer.
3. Press and hold RESET until the timer
resets.
*Available on vehicles with single fuel tank only.
Press SETUP repeatedly to cycle through the following features:
System check and vehicle feature customization
RESET FOR
SYSTEM CHECKWhen this message appears, press RESET and
the message center cycles through different
systems and provides a status if needed.
UNITSDisplays the current units in English or Metric.
Press RESET to switch between English and
Metric.
LANGUAGE =
ENGLISH /
SPANISH / FRENCHDisplays the message center readout in
English, Spanish or French.
Waiting four seconds or pressing RESET
cycles the message center through each of the
choices. Press and hold RESET for two
seconds to set the choice.
Note:When returning to the SETUP menu and a non-English language
has been selected, HOLD RESET FOR ENGLISH is displayed to change
back to English. Press and hold RESET to change back to English.
Instrument Cluster
32
2012 F-650/750(f67)
Supplement, 2nd Printing
USA(fus)