308=03=69 Manual Transmission/Transaxle 308=03=69
INSTALLATION
Transaxle - 2.OL Duratec-HE (M14)(16 11 4 0)
i
Special Tool(s)
I I Support Bar, Engine
Adapter for 303-290A
303-290-01 (21 -1 40-01
)
General Equipment , I
@ 21 14005
21 14006
I Retaining strap I
Adapter for 303-290A
303-290-05A (2 1
- 1 40-05A)
Adapter for 303-290A
303-290-06 (21 -1 40-06)
I Transmission jack I
Materials
Name Specification
Installation
1. CAUTIONS:
A~se suitable retaining straps to secure
the transaxle on the transmission jack.
A~ake sure that the two locating dowels
are installed.
Using a suitable transmission jack, install
the transaxle.
Manual transmission
1 fluid
2. Install the transaxle right-hand retaining
bolts.
WSD-M2C200-C
2006.0 Fiesta 1212006 G453417en
procarmanuals.com
308-03-71 Manual Transmission/Transaxle 308-03-71
INSTALLATION
Attach the exhaust flexible pipe to the 15.
Remove the support wrap or suitable splint
catalytic converter. from
the exhaust flexible pipe.
i
3m ACAUTION:~~ brake fluid is spilt on the 16. lnstall the right-hand halfshaft.
paintwork, the affected area must be For additional information,
refer to: Front
immediately washed down with cold water. Halfshaft
RH (205-04 Front Drive
N0TE:Make sure the spring clip is correctly seated. Halfshafts, Removal and Installation).
Connect the clutch slave cylinder supply
17. lnstall the left-hand halfshaft.
line. For additional information,
refer to: Front
lnstall the spring clip. Halfshaft LH (205-04 Front Drive
Halfshafts, Removal and Installation).
18. lnstall the engine support insulator.
14. Raise and support the vehicle. For
additional information, refer to: (I
00-02
Jacking and Lifting)
19. Install the accessory drive belt cover.
Jacking (Description and Operation),
Lifting (Description and Operation).
2006.0 Fiesta 1212006 G453417en
procarmanuals.com
308-03-74 Manual Transmission/Transaxle 308-03-74
INSTALLATION
34. Adjust the gearshift cables.
For additional information, refer to:
Gearshift Cable Adjustment
(308-00
Manual Transmission/Transaxle and
Clutch
- General Information, General
Procedures).
35. Bleed the clutch system.
For additional information, refer to: Clutch
System Bleeding (308-00 Manual
Transmission/Transaxle and Clutch -
General Information, General Procedures).
36, Install the battery tray.
For additional information, refer to: Battery
Tray
- 2.OL Duratec-HE (M14) (414-01
Battery, Mounting and Cables, Removal
and
Installation).
37. With the vehicle on a level surface, fill the
transaxle until the fluid level is just below
the bottom of the filler hole.
2006.0 Fiesta 1212006 G453417en
procarmanuals.com
