differential FORD FIESTA 2007 Workshop Manual
[x] Cancel search | Manufacturer: FORD, Model Year: 2007, Model line: FIESTA, Model: FORD FIESTA 2007Pages: 1226, PDF Size: 61.26 MB
Page 157 of 1226
205-04-5 Front Drive Halfshafts 205-04-5
DIAGNOSIS AND TESTING
Possible Sources Action
Halfshaft Joint Pullout Outer front drive halfshaft INSPECT
and REPAIR or
retainer circlip missing or not
I I INSTALL new as necessary.
Front suspension components
worn or damaged.
correctly seated differential
side. CHECK
for worn bushings or
bent components (front stabil-
izer bar, front suspension lower
arm). REPAIR or INSTALL new
as necessary. REFER to
Section
204-01 [Front
Suspension]. REFER to Halfshaft
LH
-
1 Halfshaft RH - in this section.
Engineltransaxle assembly
misalignment. CHECK engine mounts for
damage or wear. REPAIR or
INSTALL new as necessary.
Frame rail or strut tower out of
position or damaged. CHECK underbody dimen-
sions. REFER to Section
501 -
00 [Body System - General
Information].
-- - --
2006.0 Fiesta 1212006 G25403en
procarmanuals.com
Page 961 of 1226
Automatic Transmission/Transaxle .
Vehicles With: 4-Speed Automatic
Transmission
(AW81-40)
SECTION 307-01 Automatic Transmission/Transaxle
. Vehicles With: 4-Speed Automatic Transmission
(AW81-40)
VEHICLE APPLICATION:2006.0 Fiesta
CONTENTS PAGE
SPECIFICATIONS
Specifications
........................................................................\
.............................................. 307-0 1 -3
DESCRIPTION AND OPERATION
Automatic Transaxle
........................................................................\
...................................
Transmission cross-section ........................................................................\
........................
Torque converter with Torque Converter Clutch (TCC) ......................................................
Fluid pump and stator shaft ........................................................................\
........................
........................................................................\
......... Planetary gearset ......................... .:
Clutches and brakes ........................................................................\
...................................
Intermediate gear stage and differential assembly .............................................................
Main control body ........................................................................\
.......................................
Internal' gearshift mechanism ........................................................................\
.....................
Fluid circuit ........................................................................\
.................................................
........................................................................\
....................................... Identification Tags
Type plate
........................................................................\
...................................................
Transmission Ranges and Power Flow ........................................................................\
......
Transmission ratio and power flow route - 1st gear ............................................................
Transmission ratio and power flow route - 2nd gear ..........................................................
Transmission ratio and power flow route . 3rd gear ...........................................................
Transmission ratio and power flow route . 4th gear ...........................................................
Transmission ratio and power flow route . reverse gear ....................................................
Transaxle Electronic Control System ........................................................................\
..........
........................................................................\
..................................................... Overview
Transmission control unit
........................................................................\
............................
........................................................................\
.................................... Gearshift strategies
Selector lever positions
........................................................................\
..............................
Signal transmission on the CAN databus ........................................................................\
...
........................................................................\
...................................................... Sensors
........................................................................\
.................................................... Actuators
DIAGNOSIS AND TESTING
Automatic Transaxle
........................................................................\
................................... 307-01
Inspection and Verification ........................................................................\
.................... 307-01
Diagnostic Trouble Code Chart
........................................................................\
.................. 307-01
........................................................................\
...................................... Line Pressure Test 307-01
Stall Speed Test
........................................................................\
....................................... 307-01
Time Lag Test
........................................................................\
............................................. 307-01
procarmanuals.com
Page 966 of 1226
Automatic Tr;
Vehicles Wil
307-01 -6 Transn
~nsmission/Transaxle -
:h: 4-Speed Automatic
~ission (AW81-40) --
DESCRIPTION AND OPERATION
Item Description
I 1 I I st - 3rd gear clutch 1
1 2 14th gear brake I
1 3 1 Reverse gear clutch I
1 4 )2nd - 4th gear brake I
1 5 1 Reverse gear brake I
1 6 1 3rdl4th gear clutch I
1 7 ITorque converter 1
1 8 1 Transmission input shaft I
1 9 I Fluid pump I - --
[ 10 1 Differential assembly I
~l~put wheel, planetary gearset I
11
1 13 1 Planetary gearset I
Intermediate gear stage
vlIlstgear one-way clutch I
1 15 1 2nd gear one-way clutch I
Torque converter with Torque
Converter Clutch (TCC)
Item Description
I 1 I Torque converter housing and impeller I
1 2 1 Turbine wheel 1
1 4 1 Transmission input shaft I
FlGwith roller-type one-way clutch (
The torque converter hydraulically transmits the
output torque from the engine to the input shaft of
the transmission.
The stator increases the torque up to the clutch
point (approx. 90
% speed difference between the
impeller and the turbine wheel).
In order to increase the efficiency of the automatic
transmission, the torque converter is also equipped
with a hydraulically activated TCC
The TCC is applied with slip to ensure soft
engagement.
i
When the TCC is engaged, the torque is '..
transmitted directly from the crankshaft via the
torque converter housing to the transmission input
shaft.
2006.0 Fiesta 1212006 ~380521 en
procarmanuals.com
Page 970 of 1226
Automatic Transmission/Transaxle -
Vehicles With: $-Speed Automatic
Transmission
(AW81-40)
DESCRIPTION AND OPERATION
Overview of operation
Item Descri~tion
I 1 I I st - 3rd gear clutch I
1 2 12nd gear one-way clutch I
1 3 12nd - 4th gear brake I
1 4 1 1st gear one-way clutch
1 5 1 Reverse gear brake I
1 6 13rd14th gear clutch
Item Description
1 8 1 Output wheel, planetary gearset
I
1 7 1 From the torque converter
1 9 ( Intermediate gear stage I
I
1 10 1 Differential assembly I
I A I Planetary gearset, rear I
11
12
I B I Planetary gearset, front I
4th gear brake
Reverse gear clutch
2006.0 Fiesta 1212006 ~380521 en
procarmanuals.com
Page 971 of 1226
Automatic Transmission/Transaxle -
Vehicles With: 4-Speed Automatic
Transmission
(AW81-40)
DESCRIPTION AND OPERATION
i '
Intermediate gear stage and differential assembly
1 I
Component Connects
2006.0 Fiesta 1212006 G380521 en
3rdl4th gear clutch
Reverse gear clutch
2nd
- 4th gear brake
4th gear brake
Reverse gear brake
1st gear one-way clutch
2nd gear one-way clutch
* Only in selector lever position 2
** Only in selector lever position 1
Transmission input shaft to planet gear
carrier
Transmission input shaft to large sun gear
Transmission housing to large sun gear
Transmission housing to 2nd gear one-
way clutch
Transmission housing to planet gear
carrier
Transmission housing to planet gear
carrier
4th gear brake to large sun gear
X
X
X**
X X*
X X
XXX X
X
procarmanuals.com
Page 972 of 1226
Automatic Transmission/Transaxle -
Vehicles With: 4-Speed Automatic
307-01 -1 2 Transmission (AW81-40) 307-01 -1 2 --
DESCRIPTION AND OPERATION
Item Description The output wheel of the planetary gearset drives
I 1 I Output wheel, planetary gearset
2
I I 1
The annulus of the planetary gearset is fixedly Any differences in rotational speed between the
connected to the output
wheel of the planetary two halfshafts are compensated by the differential.
gearset.
the input wheel of the intermediate gear stage.
3
4
Main control body
Output wheel, intermediate gear stage
Item Descri~tion The hydraulic lines and pressures are electronically
The output
wheel of
the intermediate gear stage [<.
drives the spur gear of the differential assembly.
Differential assembly
Input wheel, intermediate gear stage The
differential assembly transmits the torque
via
the halfshafts to the front wheels.
In addition, the manual selector slide in the main
control body provides a hydraulic emergency
running programme which
allows the vehicle to be
Manual selector lever driven in 3rd aear with the selector lever in position
.
1
Shift timing solenoid valve
5
2006.0 Fiesta 1212006 ~380521 en
regulated by a proportional solenoid valve (main
regulating valve) and four shift solenoid valves.
1 6 1 SSA shift solenoid valve
SSB
shift solenoid valve
transmission control unit-fail. -
"D", "2" or "ll'and in reverse gear with the selector
lever in position "R if key components or the
The hydraulic pressure is distributed to the The
manual selector slide is actuated by the driver
individual clutches and brakes in the main control via the selector lever, the selector lever cable, the
body. selector shaft lever and the internal gearshift
mechanism.
procarmanuals.com
Page 973 of 1226
Automatic Transmission/Transaxle -
Vehicles With: 4-Speed Automatic
307-01 -1 3 Transmission (AW81-40) 307-01 -1 3
DESCRIPTION AND OPERATION
Internal gearshift mechanism
Item Description The movement is then transferred via the selector
1
2
I I I The cone displaces the parking pawl when the
The mechanical parking lock secures the vehicle
selector lever position wPw is against rolling away.
The parking pawl engages in the teeth on the
When the vehicle is stationary it is engaged purely
output wheel of the planetary gearset. mechanically via the selector lever when the
selector lever position "P" is engaged. Accordingly,
the differential is blocked via the
intermediate shaft, and the vehicle is secured and
The movement of the selector lever is transmitted
cannot roll away. via the selector lever cable to the selector shaft Stepped cam
with actuating lever for the
3
4
lever. Selector
shaft
2006.0 Fiesta 1212006 G380521 en
shaft to the stepped cam.
forms part of the stepped cam, and it is used to
actuate the manual selector slide in the main
Actuating rod for the parking pawl with cone
Parking pawl
manual
selector slide
control body.
The actuating rod for the parking pawl with cone
is hooked into the stepped cam.
The actuating lever for
the manual selector slide
procarmanuals.com
Page 979 of 1226
Automatic Transmission/Transaxle -
Vehicles With: 4-Speed Automatic
307-01 -1 9 Transmission (AW81-40) 307-01 -1 9
DESCRIPTION AND OPERATION
1 2 I Transmission input shaft I
Item Description The planet gear carrier (6) is held by the I st gear
1 3 1 I st - 3rd gear clutch I
I 1 I From the torque converter
1 4 1 Small sun gear I
one-way clutch (5).
1 5 1 1st gear one-way clutch I
1 6 1 Planet gear carrier I
1 7 Reverse gear brake I
1 8 1Short planet gear I
1 9 1 Long planet gear I
1 0 Annulus
and output wheel of the planetary
1 1 gearset
vllntermediate gear stage I
1 12 1 Differential assembly I
N0TE:ln selector lever position "1 " the planet gear
carrier is also held by the reverse gear brake
(7)
(engine braking).
The short planet gears (8) are driven by the small
sun gear in the opposite direction of rotation to the
output from the engine.
The short planet gears drive the long planet gears
(9) in the same direction of rotation as the output
from the engine.
The long planet gears drive the ring gear (10) in
the same direction of rotation as the output from
the engine.
The annulus is fixedly connected to the output
wheel of the planetary
gearset and drives the
intermediate gear stage (1 1
) in the opposite
direction of rotation to the output from the engine.
I B I Planetary gearset, front I the output from the engine.
A
Drive is transmitted from the torque converter (1)
to the transmission input shaft (2) and via the
/ 1st-3rd gear clutch (3) to the small sun gear (4).
2006.0 Fiesta 1212006 G380528en
Planetary gearset, rear The intermediate gear stage drives
the differential
assembly (12) in the same direction of rotation as
procarmanuals.com
Page 981 of 1226
Automatic Transmission/Transaxle -
Vehicles With: 4-Speed Automatic
307-01 -21 Transmission
(AW81-40) 307-01 -21
DESCRIPTION AND OPERATION
Item Description
111lst gear clutch I
I
1 4 1 Small sun gear I
--
I
2
1 9 1 Long planet gear I
From the torque converter
Transmission input shaft
6 8
10 Annulus
and output wheel of the planetary
I lgearset
Planet gear carrier
Short planet gear
I 11 I Intermediate gear stage I
1 12 1 Differential assembly I
The large sun gear (15) is held by the 2nd gear
one-way clutch (14) and the 2nd-4th gear brake
(1 3).
N0TE:ln selector lever position "2" the large sun
gear is also held by the 4th gear brake (1 6) (engine
braking).
The short planet gears (8) are driven by the small
sun gear in the opposite direction of rotation to the
output from the engine.
The short planet gears drive the long planet gears
(9) in the same direction of rotation as the output
from the engine.
The long planet gears are supported by the large
sun gear which is being held, and they drive the
planet gear carrier (6) in the same direction of
rotation as the output from the engine.
The long planet gears drive the ring gear (10) in
the same direction of rotation as the output from
the engine.
The annulus is fixedly connected to the output
wheel of the planetary
gearset and drives the
A
1st-3rd gear clutch (3) to the small sun gear (4).
B
2006.0 Fiesta 1212006 G380528en
direction of rotation to the output from the engine.
Planetary gearset, rear intermediate
gear stage (1 1 ) in the opposite
Drive is transmitted from the torque converter (1 ) assembly (12) in the Same direction of rotation as
to the transmission input shaft (2) and via the the
output from the engine.
Planetary
gearset, front
The intermediate gear stage drives the differential I
procarmanuals.com
Page 983 of 1226
Automatic Transmission/Transaxle -
Vehicles With: 4-Speed Automatic
Transmission
(AW81-40)
DESCRIPTION AND OPERATION
1 3 1 I st - 3rd gear clutch I
Item Description
1 4 1 Small sun gear I
1
2
-
1 6 1 Planet gear carrier I
From the torque converter
Transmission input shaft
10 Annulus and output wheel
of the planetary
1 lgearset
I 11 I Intermediate gear stage I
1 12 1 Differential assembly I
)I 2nd - 4th gear brake I
1 14 12nd gear one-way clutch I
1 15 1 Large sun gear I
1 17 1 3rdl4th gear clutch I
I A I Planetary gearset, rear I
I B I Planetary gearset, front I
The drive is transmitted from the torque converter
(I) on the one hand to the transmission input shaft
(2) and via the 1st-3rd gear clutch (3) to the small
sun gear
(4), and on the other hand from the
transmission input shaft via the
3rdl4th gear clutch
(17) to the planet gear carrier (6).
As the drive is transmitted to two components
simultaneously, there are no relative movements
within the planetary
gearset. The planetary gearset
rotates as a complete unit.
N0TE:The 2nd-4th gear brake (1 3) remains
engaged, but the large sun gear
(I 5) can rotate in
the same direction of rotation as the output from
the engine by means of the 2nd gear one-way
clutch
(14), as a result of which the 2nd-4th gear
brake has no influence on the transmission ratio.
The Annulus (1
0) is fixedly connected to the output
wheel of the planetary
gearset and drives the
intermediate gear stage (1 1
) in the opposite
direction of rotation to the output from the engine.
The intermediate gear stage drives the differential
assembly (12) in the same direction of rotation as
the output from the engine.
2006.0 Fiesta 1212006 G380528en
procarmanuals.com