reset FORD FIESTA 2011 6.G User Guide
[x] Cancel search | Manufacturer: FORD, Model Year: 2011, Model line: FIESTA, Model: FORD FIESTA 2011 6.GPages: 357, PDF Size: 2.56 MB
Page 38 of 357
Radio Display Condition Action Required
ACQUIRING Radio requires more
than two seconds to
produce audio for the
selected channel.No action required.
This message should
disappear shortly.
SAT FAULT Internal module or
system failure
present.If this message does
not clear within a short
period of time, or with
an ignition key cycle,
your receiver may have
a fault. See your
authorized dealer for
service.
INVALID CHNL Channel no longer
available.This previously
available channel is no
longer available. Tune
to another channel. If
the channel was one of
your presets, you may
choose another channel
for that preset button.
UNSUBSCRIBED Subscription not
available for this
channel.Contact SIRIUSat
1–888–539–7474 to
subscribe to the
channel or tune to
another channel.
NO TEXT Artist information not
available.Artist information not
available at this time on
this channel. The
system is working
properly.
Entertainment Systems
38
2011 Fiesta(fie)
Owners Guide, 1st Printing
USA(fus)
Page 41 of 357
SYNC. In addition, if you connect a media device, SYNCcreates and
retains an index of media content supported by SYNC. SYNCalso
records a short development log of approximately 10 minutes of all
recent SYNCactivity. The log profile and other SYNCdata may be
used to improve SYNCand help diagnose any problems that may occur.
The cellular profile, media device index, and development log will remain
in the vehicle unless you delete it and are generally accessible only in
the vehicle when the cellular phone or media player is connected. If you
no longer plan to use SYNCor the vehicle, we recommend you perform
a Master Reset to erase all information stored in SYNC.
SYNCdata cannot be accessed without special equipment and access to
the vehicle’s SYNCmodule. Ford Motor Company and Ford of Canada
will not access SYNCdata for any purpose other than as described
absent consent, a court order, or where required by law enforcement,
other government authorities, or other third parties acting with lawful
authority. Other parties may seek to access the information
independently of Ford Motor Company and Ford of Canada. For further
privacy information, see the sections on 911 Assist™ (if equipped),
Vehicle Health Report (if equipped), and Traffic, Directions and
Information (if equipped).
Phone dependent features
While SYNCsupports a variety of features, many are dependent upon
the functionality of your cell phone withBluetoothwireless technology.
At a minimum, most cellular phones withBluetoothwireless technology
support the following functions:
•Answering an incoming call
•Ending a call
•Using privacy mode
•Dial a number
•Redial
•Call waiting notification
•Caller ID
Other features, such as text messaging viaBluetooth, and automatic
phone book download are phone dependent features. To ensure that you
have a compatible cellular phone, refer to your phone’s user manual and
visit www.SyncMyRide.com.
SYNCvoice recognition feature
SYNCis equipped with an advanced interactive Voice Recognition (VR)
system. This system allows you to perform many operations by
Entertainment Systems
41
2011 Fiesta(fie)
Owners Guide, 1st Printing
USA(fus)
Page 51 of 357
Making a call
Making a hands-free phone call using SYNCis easy.
1. Press
.
2. When prompted, say, “Call
then say “Dial”.
To erase the last spoken digit,say “Delete”.
To erase all spoken digits,say “Clear”.
3. Once the desired number/contact is on the screen, either say “Call” or
“Dial”. The system will connect to the desired number.
Note:Once the call is placed, it will be logged into your outgoing call
history folder.
Note:You can also manually enter the desired number by pressing the
presets (0–9).
Ending a call
At any time, you can end an active phone call by pressing and
holding
or PHONE.
Exiting phone mode
When in phone mode but not in an active call, press and hold
or
PHONE to exit phone mode.
Answering an incoming call
An incoming call interacts with SYNCin much the same way it interacts
with yourBluetoothenabled cellular phone. During an incoming call:
•An audible ring tone will sound. If available, call information will
appear in the display.
•Select from the following options:
Accept the callby pressing
or PHONE. The call will be
transferred to hands-free and logged into the incoming call history folder.
Ignore the callby doing nothing. SYNCwill log the call as a missed
call.
Reject the callby pressing and holding
or PHONE. SYNCwill log
the call.
Incoming new text message
Note:This is a phone dependent feature.
Entertainment Systems
51
2011 Fiesta(fie)
Owners Guide, 1st Printing
USA(fus)
Page 71 of 357
2. Scroll untilSystem Settingsis selected and press OK.
3. Scroll to selectBluetooth Devicesand press OK to access:
•Add Bluetooth Device•Delete Device
•Connect Bluetooth Device•Delete All Devices
•Set Primary Phone•Return
•Set Bluetooth On/Off
Scroll to selectAdvancedand press OK to access:
•Prompts•Languages
•Factory Defaults•Master Reset
•Install Application?•System Info
•Return
Refer to the following sections for further information.
Adding (pairing) a phone
Note:This is a speed dependent feature and cannot be performed when
the vehicle is traveling at speeds greater than 3 mph (5 km/h).
Note:SYNCcan store up to 12 previously paired devices.
To add/pair an additionalBluetoothenabled device(s) to SYNC:
Note:To scroll, press
/.
1. Press PHONE to enter thePhone Menu
2. Scroll untilSystem Settingsis selected and press OK.
3. Scroll untilBluetooth Devicesis selected and press OK.
4. Scroll untilAdd Bluetooth Deviceis selected and press OK.
5. WhenFind SYNCappears in the display, press OK. Follow the
instructions in your device’s user guide to put your phone into discovery
mode. A six digit PIN will appear in the radio display.
6. When prompted on your phone display, enter the six digit PIN.
7. Once pairing is successful, the device name and thenConnectingand
thenConnectedwill appear in the radio display. Depending on the
functionality of your phone, you may be asked additional questions.
8. SYNCwill ask if you would like to set this phone as a Primary phone.
(This means that SYNCwill automatically attempt to connect to this
phone with every connection cycle.) Press OK.
Entertainment Systems
71
2011 Fiesta(fie)
Owners Guide, 1st Printing
USA(fus)
Page 74 of 357
Turning prompts on/off
Prompts from SYNCcan help guide you via questions, helpful hints or
ask you for a specific action. To turn prompts on/off:
Note:To scroll, press
/.
1. Press PHONE to enter thePhone Menu.
2. Scroll untilSystem Settingsis selected and press OK.
3. Scroll untilAdvancedis selected and press OK.
4. Scroll untilPromptsis selected and press OK.
5. Scroll to toggle betweenPrompts On?orPrompts Off?. (The default
setting is ON).
6. Press OK when the desired selection appears in the radio display.
Prompts Set On or Prompts Set Off will appear in the radio display as a
confirmation. SYNCwill then take you back to theAdvancedmenu.
Changing the language setting
SYNCallows you to select from three languages: English, French and
Spanish. Once selected, all radio display messages and prompts will be in
the selected language. To access the language menu:
Note:To scroll, press
/.
1. Press PHONE to enter thePhone Menu.
2. Scroll untilSystem Settingsis selected and press OK.
3. Scroll untilAdvancedis selected and press OK.
4. Scroll untilLanguagesis selected and press OK.
5. Scroll to cycle throughEnglish,FrancaisandEspanol.
6. Press OK when the desired selection is selected. If you have changed
the language setting, the display will indicate the system is updating.
Once the change is complete, SYNCwill confirm the change audibly and
in the radio display. SYNCwill then take you back to theLanguages
menu.
Returning to the factory defaults
SYNCallows you to return to its factory defaults settings. This selection
will not erase your downloaded phone book, call history, text messages,
etc. If you wish to erase all information, refer toPerforming a master
reset.
Note:To scroll, press
/.
Entertainment Systems
74
2011 Fiesta(fie)
Owners Guide, 1st Printing
USA(fus)
Page 75 of 357
1. Press PHONE to enterPhone Menu.
2. Scroll untilSystem Settingsis selected and press OK.
3. Scroll untilAdvancedis selected and press OK.
4. Scroll untilFactory Defaultsis selected and press OK.
5.
Restore Defaults? will appear. Press OK to confirm. The display will read
Defaults Set. SYNCwill take you back to theFactory Defaultsmenu.
Performing a master reset
A master reset allows you to completely erase all information stored in
SYNC(all phone book, call history and text message information as well
as all previously paired phones) and return to the factory default
settings. To perform a master reset:
Note:To scroll, press
/.
1. Press PHONE to enter thePhone Menu.
2. Scroll untilSystem Settingsis selected and press OK.
3. Scroll untilAdvancedis selected and press OK.
4. Scroll untilMaster Resetis selected and press OK.
5. Press OK to confirm when prompted. The display will confirm when
the reset is complete. SYNCwill take you back to theAdvancedmenu.
Note:Once a master reset has been completed, you must re-insert your
USB device to access its contents.
Installing new vehicle applications
You can download new software applications (if available) and then load
the desired applications onto SYNCthrough your USB port. Please refer
to www.SyncMyRide.com for further information.
System information
The system information feature allows you to access the AutoVersion
number as well as the FDN number. To access:
Note:To scroll, press
/.
1. Press PHONE to enter thePhone Menu.
2. Scroll untilSystem Settingsis selected and press OK.
3. Scroll untilAdvancedis selected and press OK.
4. Scroll untilSystem Infois selected and press OK.
5. Scroll until the desired choice is selected and press OK.
Entertainment Systems
75
2011 Fiesta(fie)
Owners Guide, 1st Printing
USA(fus)
Page 83 of 357
2. Press MENU. WhenMedia Player Menuis selected, press OK.
3. Scroll untilSystem Settingsis selected and press OK
4. WhenBluetooth Devicesis selected, press OK to select from:
•Add Bluetooth Device•Delete Device
•Connect Bluetooth Device•Delete All Devices
•Set Bluetooth On/Off•Return
5. WhenAdvancedis selected, press OK to select from:
•Prompts•Install Application?
•Languages•System Info
•Factory Defaults•Return
•Master Reset
Refer to the following sections for further information.
Adding a Bluetooth media device which is in discovery mode
Note:This is a speed dependent feature. Your vehicle must be moving
less than 3 mph (5 km/h) to use this feature.
Note:If your phone supports streamingBluetoothaudio and has already
been paired with SYNCas a phone, you do not have to go through the
pairing process again.
Note:To scroll, press
/.
1. Press AUX repeatedly until SYNC appears.
2. Press MENU. WhenMedia Player Menuis selected, press OK.
3. Scroll untilSystem Settingsis selected and press OK.
4. Scroll untilBluetooth Devicesis selected and press OK.
5. Scroll untilAdd Bluetooth Deviceis selected and press OK.
6. WhenFind SYNCappears in the display, press OK. Follow the
instructions in your device’s user guide to put your phone into discovery
mode. A six digit PIN will appear in the radio display.
7. When prompted on your phone’s display, enter the six digit PIN in the
radio display.
8. Once pairing is successful, the device name and thenConnectingand
thenConnectedwill appear in the radio display.
You can now change SYNCsources to Bluetooth Audio and stream
music from your device.
Entertainment Systems
83
2011 Fiesta(fie)
Owners Guide, 1st Printing
USA(fus)
Page 84 of 357
Adding a Bluetooth media device which is in discoverable mode
Note:This is a speed dependent feature. Your vehicle must be moving
less than 3 mph (5 km/h) to use this feature.
Note:If your phone supports streamingBluetoothaudio and has already
been paired with SYNCas a phone, you do not have to go through the
pairing process again.
Note:Use this process when your device generates the PIN instead of
SYNC.
Note:To scroll, press
/.
1. Press AUX repeatedly until SYNC appears.
2. Press MENU. WhenMedia Player Menuis selected, press OK.
3. Scroll untilSystem Settingsis selected and press OK.
4. Scroll untilBluetooth Devicesis selected and press OK.
5. Scroll untilAdd Bluetooth Deviceis selected and press OK.
6. WhenFind SYNCappears in your radio display, press OK.
7. After the search for activeBluetooth Devicesis complete, scroll to
find the desired device. Press OK to confirm.
8. Refer to your device’s user guide for instructions on how to put your
device into discoverable mode. When your media device gives you a PIN,
enter that PIN into SYNCusing voice commands (or using the 0–9
memory presets on your audio system, if equipped), when prompted.
9. When you have entered your last digit via voice, say “Enter”.
10. When the process is complete, SYNCwill displayConnectedand the
name of the device will appear in the radio display.
You can now change SYNCsources to Bluetooth Audio and stream
music from your device.
Connecting a Bluetooth media device
To connect a previously pairedBluetoothdevice:
Note:To scroll, press
/.
1. Press AUX repeatedly until SYNC appears.
2. Press MENU. WhenMedia Player Menuis selected, press OK.
3. Scroll untilSystem Settingsis selected and press OK.
4. Scroll untilBluetooth Devicesis selected and press OK.
Entertainment Systems
84
2011 Fiesta(fie)
Owners Guide, 1st Printing
USA(fus)
Page 86 of 357
Turning prompts on/off
Prompts from SYNCcan help guide you via questions, helpful hints or
ask you for a specific action. To turn prompts on/off:
Note:To scroll, press
/.
1. Press AUX repeatedly until SYNC appears.
2. Press MENU. WhenMedia Player Menuis selected, press OK.
3. Scroll untilSystem Settingsis selected and press OK.
4. Scroll untilAdvancedis selected and press OK.
5. Scroll untilPromptsis selected and press Ok.
6. Scroll to toggle betweenPrompts On?orPrompts Off?(The default
setting is ON).
7. Press OK when the desired selection is chosen. SYNCwill then take
you back to theAdvancedmenu.
Changing the SYNClanguage setting
SYNC allows you to select from three languages: English, French and
Spanish. Once selected, all of SYNC’s radio displays and prompts will be
in the selected language. To access the language menu:
Note:To scroll, press or
/.
1. Press AUX repeatedly until SYNC appears.
2. Press MENU. WhenMedia Player Menuis selected, press OK.
3. Scroll untilSystem Settingsis selected and press OK.
4. Scroll untilAdvancedis selected and press OK.
5. Scroll untilLanguagesis selected and press OK.
6. Scroll to cycle throughEnglish,FrancaisandEspanol.
7. Press OK when the desired selection is chosen. If you have changed
the language setting, the display will indicate the system is updating.
Once the change is complete, SYNCwill confirm the change audibly and
in the radio display. SYNCwill then take you back to theAdvanced
menu.
Returning to the factory defaults
SYNCallows you to return to the factory defaults settings. This
selection will not erase your indexed information. If you wish to erase all
information, refer toPerforming a master reset.
Entertainment Systems
86
2011 Fiesta(fie)
Owners Guide, 1st Printing
USA(fus)
Page 87 of 357
Note:To scroll, press/.
1. Press AUX repeatedly until SYNC appears.
2. Press MENU. WhenMedia Player Menuis selected, press OK.
3. Scroll untilSystem Settingsis selected and press OK.
4. Scroll untilAdvancedis selected and press OK.
5. Scroll untilFactory Defaultsis selected and press OK.
6. When the system asks if you would like to restore the defaults press
OK. The display will then confirm when they are restored. SYNCwill
take you back to theAdvancedmenu.
Performing a master reset
A master reset allows you to completely erase all information stored in
SYNC(all phone book, call history and text message information as well
as all paired devices) and return to the factory default settings.
Note:Once a mast reset has been completed, you must re-insert your
USB device to access the contents.
Note:To scroll, press
/.
1. Press AUX repeatedly until SYNC appears.
2. Press MENU. WhenMedia Player Menuis selected, press OK.
3. Scroll untilSystem Settingsis selected and press OK.
4. Scroll untilAdvancedis selected and press OK.
5. Scroll untilMaster Resetis selected and press OK.
6. Press OK to confirm. The display will indicate when the reset is
complete and will take you back to theAdvancedmenu.
Installing new vehicle applications
You can download new software applications (if available) and then load
the desired applications onto SYNCthrough your USB port. Please refer
to www.SyncMyRide.com for further information.
Using SYNC’s play menu
The SYNCPLAY MENU allows you to play your music by playing all
selections, by artist listing, album listing, genre listing, playlists, tracks,
or by selecting similar music to what is currently playing. You can also
choose to ‘Explore USB’ which will allow you to explore supported digital
music files on your playing device.
Entertainment Systems
87
2011 Fiesta(fie)
Owners Guide, 1st Printing
USA(fus)