HEADLAMP CONTROLTurning the headlamp control
clockwise to the first positionturns on the parking lamps,instrument panel lamps,license plate lamps, and thetail lamps. Continuing to turnthe headlamp control to thesecond position turns on the
headlamps. To use theautolamp light sensitive,automatic on off control forthe headlamps, turn theheadlamp control
counterclockwise. To turnautolamps off, turn thecontrol clockwise to the OFF
position. To activate the highbeams, simply pull the turnsignal lever towards you tothe second detent. Pull thelever towards you again todeactivate high beams. Usethe same lever to activate the
“Flash to Pass” feature. Pullthe lever towards you to thefirst detent to activate and release it to deactivate.
1
PANEL DIMMERUse to adjust the brightness
of the instrument panel andall applicable switches in thevehicle during headlamp andparking lamp operation.Move the control to the fullupright position, past detent,to turn on the interior lamps.
2
FOGLAMP CONTROL(IF EQUIPPED)With the ignition on, the
foglamps can be turned onwhen the headlamp control is in the parking lamp,headlamp or autolampposition, and the high beamsare not on. Simply pull theheadlamp control toward youto turn on the foglamps. Thefoglamp indicator light willilluminate. The foglamps willnot operate when the highbeams are activated.
3
WINDSHIELD WIPER
WASHER
The multifunction lever
controls the windshield wipermodes, speeds, and the
windshield washer. Forintermittent operation, movethe control up one position.
You can then adjust the
rotary control to the desired
interval speed. For normal orlow wiper speed, move thecontrol up two positions from
OFF. For high speedoperation, move the control
up three positions from OFF.
For windshield washercontrol, pull the end of the
lever toward you. With aquick pull and hold, thewipers will swipe three times
with washer fluid. With a longpull and hold, the wipers willactivate washer fluid for up toten seconds.
4
