diagnostic menu FORD FLEX 2014 1.G Quick Reference Guide

3 LefT veHicLe
i nforma Tion diSPLay Provides information about
various systems on your
vehicle. Use the left, 5-way
controls located on the
steering wheel to choose
and confirm settings and
messages. Refer to the
Information Displays chapter
of your Owner’s Manual for
more information.
4 Service engine
S oon Lig HT Illuminates briefly when
the ignition is turned on. If
it remains on or is blinking
after the engine is started,
the on-board diagnostics
system (OBD-II) has
detected a malfunction.
Drive in a moderate fashion
and contact your authorized
dealer as soon as possible.
5 r ig HT ve HicLe
informa Tion diSPLay*
Displays information about
Entertainment, Phone and
Navigation*. Use the right,
5-way controls located on
your steering wheel to scroll through, highlight and make
minor adjustments within a
selected menu. Refer to the
MyFord Touch chapter in
your Owner’s Manual for
more information.
6 S
Teering W HeeL
a udio conTroLS Press VOl +/- to
increase/decrease
volume levels. Press
sEEK
to access
the next/previous
radio station preset,
CD track or preset
satellite radio channel*.

Press to access
voice recognition.

Pre ss to
connect/disconnect
a phone call.
7 Pu SH buTT on ST arT* Allows you to start your
vehicle by pressing the
ENGINE sT aRT/sTOP
button while fully pressing
down on the brake pedal.
Press the button again to
turn the engine off. If your
vehicle has been idling for an extended period of
time, it will automatically
shut down. Before the
engine shuts down, a
message appears in the
information display, allowing
the driver to override the
shutdown feature.
Note: Your intelligent
access key* must be inside
the vehicle for the ignition
to start.
8 Hazard conTroL
9 SeL
ecTSHif T
a uT oma Tic®
TranSmiSSion Gives you the ability to
manually change gears if
you’d like. To use, move the
gearshift lever from D (Drive)
to S (Sport). Then use the
paddle shifters* located on
your steering wheel to make
shifts quickly. Pull the right
paddle (+) to upshift,
pull the left paddle (-) to
downshift. If your vehicle is
equipped with +/- thumb
switch on your gearshift
lever, press (+) to upshift;
press (-) to downshift.
1 Po Wer Ti LT Te LeScoPe
S Teering c oLumn*/
adju STab Le PedaLS *
Use your controls to adjust the
steering wheel and pedals to
the desired position.
2 crui Se conTroL To set your cruise
control speed: 1.
Press the ON control up
and release.
2. Accelerate to the
desired speed.
3. Press the sET control up and
release, then take your foot
off the accelerator.
After your speed has been
set, you can press s E T +/- to
adjust cruise speed. To disable,
press the OFF control down.
adaPTive crui Se conTroL * Allows you to set a ‘gap distance’
between your vehicle and the
vehicle in front of you in the same
lane during highway driving. When
your cruise control is active, press
GaP up or down to select the
gap distance. Refer to the Cruise
Control chapter of your Owner’s
Manual for more information. Note:
Driving aids do not replace
the need to watch where the
vehicle is moving and brake where
necessary. Refer to your Owner’s
Manual for safety information,
more detail and limitations.
1256783 4
.
5*iF eQU iPPed
* iF eQU iPPed
9
INs TRUmENT P aNEl
4
FLEX