lock FORD FUSION (AMERICAS) 2016 2.G Quick Reference Guide

INSTRUMENT PANEL
Low Fuel Light
A reminder light triggers when the fuel level is low or the fuel tank is nearly empty. Refuel as soon as possible.
Left Vehicle Information Display
Provides information about various systems on your
vehicle. Use the left-hand, 5-way controls located on
the steering wheel to choose and confirm settings and messages. Refer to the Information Displays chapter in your Owner’s Manual for more information.

Adaptive Cruise Control*
Adjusts your speed to maintain a proper distance between
you and the vehicle in front of you in the same lane.
You can set the gap distance between yourself and the vehicle in front by pressing the
and the buttons on
the steering wheel. Refer to the Cruise Control chapter of your Owner’s Manual for more information.
NOTE Driving aids do not replace the need to watch
where the vehicle is moving and brake when necessary.
Refer to your Owner’s Manual for safety
information, more details and limitations.
Steering Wheel Controls
Audio Controls Press VOL + or – to increase or decrease volume levels.
Press to access the next or previous radio station
preset, CD track or preset satellite radio channel*.
Voice Controls *
Press to access voice recognition.
Press to access phone mode or to answer a call.
Press
to end a phone call.
Right Vehicle Information Display*
Displays information about Entertainment, Phone and
Navigation*. Use the right-hand, 5-way controls located on
your steering wheel to scroll through, highlight and make minor
adjustments within a selected menu. Refer to the MyFord Touch
®
chapter in your Owner’s Manual for more information.
Wiper Control
Adjust the lever to switch the wipers on and off. Rotate the dial to
adjust the intermittent wipe speed. Pull the lever toward you to
use the washer and spray the windshield.
Push Button Start*
Allows you to start your vehicle by pressing the START STOP
button while fully pressing down on the brake pedal. Press the
button again to switch the engine off. If your vehicle has been
idling for an extended period of time, it automatically shuts
down. Before the engine shuts down, a message appears in the
information display, allowing the driver to temporarily override the
shutdown feature.
NOTE Your intelligent access transmitter must be inside the
vehicle for the ignition to start. The keyless warning alert sounds
the horn twice when you exit the vehicle with the intelligent
access transmitter and your vehicle is in RUN, indicating that
the vehicle is still on.
Tilt/Telescope Steering Column
Pull the lever down to unlock the steering column. Adjust the
steering column to your desired position. Push the lever up to lock
the desired position into place.
*if equipped*if equipped5

Pairing Your Cell Phone with SYNC
In order to use many of the features of SYNC, such as making a phone call or receiving a
text, you must first connect or pair your phone with SYNC.
To Pair Your Cell Phone for the First Time
1. Make sure that your vehicle is in park (P) or neutral (N) with the parking brake applied
(with manual transmission only), then switch your ignition and radio on. Switch on
your phone's Bluetooth
® feature before starting the pairing process. See your device's
manual, if necessary.
2. Press the phone button
. When the display indicates there is no paired phone, select
the option to add a phone.
3. When a message to begin pairing appears in the audio display, search for SYNC on your
phone to start the pairing process.
4. When prompted on your phone's display, enter the six-digit PIN provided by the system
in the audio display.
5. The display indicates when the pairing is successful.
The System May Prompt You to
» Set your phone as the primary/favorite (the primary phone receives messages
and voicemail).
» Download your phone book (a requirement to use the full set of voice commands).
» Switch on 911 Assist
®.
TIPS
» Make sure you accept the request
from SYNC to access your phone.
» To pair subsequent phones, please
refer to Using SYNC with Your Phone
section in the SYNC chapter of your
Owner’s Manual.
» If you experience pairing problems, try
performing a clean pairing by deleting
your services from SYNC, deleting your
phone pairing from SYNC, and then
repeating the Pairing Your Cell Phone
with SYNC process.
Why You Need a SYNC
Owner Account
A SYNC owner account provides you with
the latest software updates and, if you have
questions, free customer support.
NOTE Your SYNC system may offer
advanced features such as AppLink
TM. Some
services may not be available in your area.
Visit the website or call the toll-free number
for more information. See the inside front
cover of this guide for details.
Using Your Cell Phone
with SYNC
NOTE You must download your phone
book to make phone calls with voice
commands by name.
Making a Phone Call
Use SYNC to make a phone call to anyone
in your phone book by pressing the voice
button
. When prompted, say a
voice command.
For example, you could say “Call Jake
Smith at home”. When the system
confirms the number, say “Dial” to initiate
the call.
NOTE You can also make phone calls by
pressing the voice button
and when
prompted, give the voice command “Dial”,
then verbally say the phone number.
Answering Incoming Calls
Whenever you have an incoming call, the
name and number of the person calling
appears in the display. Press the phone
button
to answer an incoming call. You can hang up at any time by pressing
and holding the phone button
.
Do Not Disturb Mode
This feature blocks incoming calls and text
messages and saves them for later. You still
have access to outgoing calls when this
feature is active. Say the voice command
“Do not disturb on” to enable and “Do not
disturb off” to disable.
Using SYNC to
Access Digital Media
Plug in your USB media devices such as
phones and MP3 players, and use SYNC
to play all of your favorite music.
Using Voice Commands to Play Music
1. Plug your media player into your
USB port.
2. Press the voice button
. When
prompted, say “USB”, then follow
up by saying a voice command.
SYNC is a Hands-free,
Voice Recognition System
Used for Entertainment,
Information and
Communication.
SYNC. Say the Word.
Before You Get Started
1. Set up your owner account
at SyncMyRide.com (U.S.)
or SyncMyRide.ca (Canada).
Register by following the on-screen
instructions. After registering
you can see which complimentary
services you are eligible for.
2. SYNC uses a wireless connection
called
Bluetooth® to communicate
with your phone. Switch on Bluetooth
mode in your phone’s menu
options. This lets your phone find
SYNC. If you need more details on
setting up your phone with SYNC,
visit SyncMyRide.com (U.S.) or
SyncMyRide.ca (Canada) or your
phone manufacturer’s website.
GETTING STARTED
WITH YOUR SYNC
® SYSTEM
7

Climate
SYNC with MyFord Touch controls
the temperature, airflow direction, fan
speed, and activates other climate
features, like heated front seats* for
you and your passenger.
Set Your Temperature
» Touch the lower-right blue corner on
your touchscreen.
» Set your exact, desired temperature
using the (+) or (–) buttons.
Heated Steering Wheel*
» Touch the lower-right blue corner on
your touchscreen.
» Touch the heated steering wheel icon*
to warm the steering wheel.
Entertainment
No matter how you store your music, SYNC
makes it yours to enjoy when you’re behind
the wheel. Just press the lower-left, red
corner of the touchscreen. From here, you
can easily go between AM, FM, SiriusXM
and other media sources.
Set Your Radio Presets
» Touch the Entertainment corner on
the touchscreen.
» Touch FM.
» Enter the desired station and
touch Enter.
» Touch Presets , then touch and hold one
of the memory preset buttons to save
it. The sound mutes and then returns
after it saves the station. Bring in Your Own Music
Gain access to any audio source by voice
and even control how each operates, like
changing radio stations, CD tracks or music
on one of the following devices:

» Smart-charging USB
» Bluetooth
® streaming
» SD card*
Refer to the MyFord Touch chapter in your
Owner’s Manual, visit the website or call the
toll-free number for more information.
See the inside front cover of this guide
for details.
*if equipped
SYNC® WITH MYFORD TOUCH®* CONTINUED
Climate Controlled Front Seats*
For heated front seats, press repeatedly to cycle through
the various heat modes and off. More indicator lights mean
warmer settings. For cooled seats, press
repeatedly to
cycle through the various cool modes and off. More indicator lights mean cooler settings.
Memory Function*
Use the memory controls on the driver’s
door to program and then recall memory positions. Move the seats and mirrors to
the desired positions. To program up to
three positions, press and hold the desired preset button until you hear a single tone. Use the controls to recall the set positions.
You can also link your intelligent access transmitter to your saved memory settings
so that the seat and mirror positions automatically recall when you unlock your door. See the Seats chapter in your Owner's
Manual for details.
Moonroof*
Your moonroof controls are located on the overhead console and have a one-touch open and close feature. To open the moonroof,
press
. It stops short of the fully opened position to help
reduce wind noise. To close, press . To use the venting feature,
press the button.
Tilting Head Restraints
The front head restraints have a tilting feature for extra comfort.
To Tilt the Head Restraint Adjust the seatback to an upright driving or riding position. Pivot the head restraint forward toward your head to the desired position. Once it is in the forward-most
position, tilting it forward once more
releases it to the upright position.
NOTE Do not attempt to force the head restraint backward after tilting it. Instead, continue tilting it forward until the head restraint releases to the upright position.
SelectShift Automatic® Transmission*
Gives you the ability to manually change gears if you like.
To use, move the gearshift lever from drive (D) to sport (S).
If Equipped with the Toggle Located on the Gearshift Lever
» Press the (+) button to upshift.
» Press the (–) button to downshift.
If Equipped with the Steering Wheel Paddles Located on
Your Steering Wheel
» Pull the right paddle (+) to upshift.
» Pull the left paddle (–) to downshift.
COMFORT
*if equipped11

Remote Start*
Remote start allows you to start the engine from outside your
vehicle using your remote transmitter. To start, press and then
press twice within three seconds. Once inside, apply the brake
while pressing the START STOP button. Shift into drive (D) and
go. If you have the integrated keyhead transmitter, insert the key
into the ignition and switch on the ignition as you normally would
before driving. To switch off the engine from outside the vehicle
after using your remote start, press
once.
Intelligent Access*
NOTE Your transmitter must be within three feet (one meter)
of the vehicle for intelligent access to function properly.
This system operates the power locks. To unlock the driver’s door,
pull the front exterior door handle. To lock the doors, press the
sensor on top of the door handles. To unlock and open the luggage
compartment, press the exterior release button hidden above the
license plate. The intelligent access transmitter also contains a
mechanical key blade to unlock the driver’s door, if necessary.
You must have a valid transmitter inside the vehicle to switch on
the ignition and start the engine. If you are unable to start your
vehicle using the push button start, do the following:
1. Place the transmitter in the backup slot inside the
center console with the buttons facing the rear of the vehicle.
2. With the key in this position, press the brake pedal, then
the START STOP button to switch on the ignition and start
your vehicle.
Auto-Start-Stop*
The system helps reduce fuel consumption by automatically
shutting off and restarting the engine while your vehicle is
stopped. The engine restarts automatically when you release
the brake pedal. A green Auto-Start-Stop indicator light within
the instrument cluster displays to indicate when the engine stop
occurs. The system automatically turns on every time you start
your vehicle.
To switch this feature off, press the Auto-Start-Stop button
, located on the center console, near the gearshift lever.
The button lights. Press the button again to restart. The system
automatically starts with every vehicle start.
Active Park Assist*
The active park assist system detects an available parallel parking
space and automatically steers your vehicle into the space (hands-
free) while you control the accelerator, gearshift and brakes. The
system visibly and audibly instructs you to park your vehicle. To
use, press the
button located on the center console, near the
gearshift lever. To stop the parking procedure, grab the steering
wheel or press the control again. For complete information, refer to
the Parking Aids chapter of your Owner’s Manual.

NOTE The driver is always responsible for controlling the vehicle,
supervising the system and intervening, if required.
CONVENIENCE
*if equipped
Front and Rear Parking Aids*
Sound an audible warning tone if there is an obstacle near the
vehicle’s front or rear bumpers. As the vehicle moves closer to the
obstacle, the rate of the warning tone increases in frequency. The
front sensors turn on automatically when the gearshift is in any
position other than park (P) and the vehicle speed is below
7 mph (12 km/h). The rear sensors detect certain objects while
the transmission is in reverse (R). See the Parking Aids chapter in
your Owner’s Manual for complete information on your vehicle’s
parking aids.
Lane Keeping System*
Notifies you to stay in your lane through the
steering system and the instrument cluster
display when the front camera detects an
unintentional drift out of your lane is likely
to occur. The system automatically detects
and tracks the road lane markings using a
camera mounted behind the interior rear
view mirror. Set your system settings as
desired by Mode and Intensity from your information display
screen. See the Information Displays chapter in your Owner’s
Manual for more details on how to change your settings.
Driver Alert*
Monitors your driving behavior using various inputs including
the front camera sensor. If the system detects that your driving
alertness level reduces below a certain threshold, then the system
sounds a tone and displays a message in the information display.
Press OK on the steering wheel to clear a warning, if required.
Pre-Collision Assist*
The system is designed to alert you of certain collision risks. The
system's sensor detects your vehicle's rapid approach to other
vehicles traveling in the same direction as your vehicle. When your
vehicle rapidly approaches another vehicle, a red warning light
flashes and a tone sounds.
The brake support system assists you in reducing the collision speed
by pre-charging the brakes. If the risk of a collision further increases
after the audio-visual warning, the brake support prepares the
brake system for rapid braking. The system does not automatically
activate the brakes, but if you press the brake pedal even lightly, the
brakes apply full stopping power. For complete information, refer to
the Driving Aids chapter of your Owner’s Manual.
NOTE Visibility aids do not replace the need to watch where
the vehicle is moving. Refer to your Owner’s Manual for safety
information, more details and system limitations.
SecuriCodeTM Keyless Entry Keypad*
Allows you to lock or unlock the doors, recall memory features and
arm or disarm the anti-theft alarm. The keypad, located near the
driver’s window, is invisible until touched and then it lights up so
you can see and touch the buttons. To get started, you need your
five-digit factory code found on your owner’s wallet card or you can
display it temporarily within the information display, if the card is not
handy. Entering this code unlocks the driver’s door. To lock all of the
doors, press and hold 7•8 and 9•0 at the same time. For complete
information, refer to the Locks chapter of your Owner’s Manual.
FUNCTION
*if equipped13